GB/T 21711.10-2025 English PDFUS$1254.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21711.10-2025: Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays Status: Valid
Basic dataStandard ID: GB/T 21711.10-2025 (GB/T21711.10-2025)Description (Translated English): Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L25 Classification of International Standard: 29.120.70; 31.220.99 Word Count Estimation: 62,678 Date of Issue: 2025-05-30 Date of Implementation: 2025-05-30 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 21711.10-2025: Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 29.120.70;31.220.99 CCSL25 National Standard of the People's Republic of China Basic Electromechanical Relays Part 10.Additional functional characteristics and features of large capacity relays Security Requirements (IEC 61810-10.2019, IDT) Released on 2025-05-30 2025-05-30 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface V Introduction VI 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 3.5 Terms and definitions related to contacts 2 4 Influence 2 5 Rated value 2 5.6 Electrical durability 3 5.7 Working speed 3 5.8 Contact load 3 6 General test rules 3 7 Documents and logos 4 8 Temperature rise 4 8.4.4 Threaded and unthreaded terminals 4 8.4.5 Alternative terminal types 4 8.4.6 Socket 5 9 Basic working functions 6 10 Dielectric withstand voltage 6 11 Electrical durability 8 11.1 General 8 11.2 Overload test 9 11.3 Severity Level 9 12 Mechanical durability 9 13 Clearances, creepage distances and solid insulation 9 13.1 General 9 13.2 Clearance and creepage distances 9 13.3 Solid insulation 10 13.3.1 General 10 13.3.2 Partial discharge 11 13.6 System Insulation Coordination Assessment 11 13.6.1 General 11 13.6.2 Specific procedures 11 13.6.3 Condition 11 13.6.4 Test Procedure 11 13.6.5 Data evaluation 12 14 Lead terminal 12 14.1 General 12 14.2 Threaded and unthreaded terminals 12 15 Seal 12 16 Heat and fire resistance 13 17 Special Test 13 Appendix A (Normative) Interpretation of relays 14 Appendix B (Informative) Test Device 15 Appendix C (Normative) Test Device 18 Appendix D (Informative) Special loads 19 Appendix E (Normative) Temperature rise test configuration 20 Appendix F (Normative) Measurement of electrical clearance and creepage distance 21 Appendix G (Normative) Relationship between rated impulse voltage, rated voltage and overvoltage category 22 Appendix H (Normative) Pollution Degree 24 Appendix I (Normative) Tracking resistance test 25 Appendix J (Informative) Terminal Series Diagram 26 Appendix K (Normative) Glow-wire test 27 Appendix L (Normative) Ball Pressure Test 28 Appendix M (Informative) Needle flame test 29 Appendix N (Informative) Standard welding process resistance 30 Appendix O (Informative) Risk Assessment 31 Appendix P (Informative) Mechanical properties of lead terminals 32 P.1 General 32 P.2 Mechanical strength of lead terminals 32 P.2.1 General 32 P.2.2 Test procedure 32 P.2.3 Requirement 33 P.3 Bending test (conductor damage and accidental loosening test) 33 P.3.1 General 33 P.3.2 Test procedure 33 P.3.3 Requirement 35 P.4 Pull-out test 35 P.4.1 General Principles 35 P.4.2 Test procedure 35 P.4.3 Requirement 36 Appendix Q (Normative) Long-term stability of seals (leakage rate evaluation) 37 Q.1 General 37 Q.2 Test procedure 37 Q.2.1 Preprocessing 37 Q.2.2 Evaluation 37 Q.2.3 Requirement 38 Appendix R (Informative) Short-circuit capacity 39 R.1 General 39 R.2 Test procedure 40 R.2.1 General 40 R.2.2 Pretreatment 40 R.2.3 Test circuit setting 40 R.2.4 Test procedure and/or sequence 40 R.3 Requirement 40 R.4 Test conditions 40 Appendix S (Informative) Special Application Test Photovoltaic System 42 S.1 General 42 S.2 Insulation coordination 42 S.3 Product marking 42 S.4 Performance requirements---Electrical durability 42 S.5 Type test 42 S.5.1 Overview 42 S.5.2 Short circuit test 43 S.5.3 Critical DC load current test 43 S.5.4 Climate test 44 S.5.5 Special tests - salt spray, vibration and shock 44 Appendix T (informative) Special application test road vehicles 45 T.1 General 45 T.2 Road vehicles 45 T.2.1 General requirements 45 T.2.2 Instantaneous drop in supply voltage 46 T.2.3 Reset behavior when coil voltage drops 47 T.2.4 Coil overvoltage 47 T.2.5 Slow drop and rise of supply voltage 48 T.2.6 Electrical durability 49 T.2.7 Noise 49 T.2.8 Vibration 50 T.2.9 Impact 52 References 54 Figure 1 Test procedure for system evaluation 12 Figure P.1 Bending test equipment 35 Figure Q.1 Temperature cycle 37 Figure R.1 Short-circuit current capability test circuit 39 Figure T.1 Instantaneous voltage drop of the system nominal voltage 46 Figure T.2 Reset test supply voltage 47 Figure T.3 PSD of acceleration vs. frequency 50 Figure T.4 PSD of acceleration vs. frequency 51 Table 1 Type test 3 Table 2 Required relay information 4 Table 3 Test wires with test current greater than 400A and not exceeding 800A determined by the current carried by the lead-out terminals Table 4 Test copper busbar with test current greater than 400A and not exceeding 1000A determined by the current carried by the lead-out terminal Table 5 Dielectric Withstand Voltage --- AC 6 Table 6 Dielectric Withstand Voltage --- DC 7 Table 7 Minimum electrical clearance in air for insulation coordination 9 Table B.1 Verification of closing and opening capabilities (abnormal conditions) 15 Table B.2 Verification of closing and opening capabilities (normal conditions) 16 Table B.3 Electrical durability test 17 Table G.1 Rated voltage of power supply system and equipment when overvoltage protection is provided by the arrester specified in GB/T 21711.1 The corresponding relationship between the rated impulse voltage 22 Table P.1 Tightening torque for verifying the mechanical strength of threaded terminals 33 Table P.2 Round copper conductor pull-out and bending test values 34 Table P.3 Flat copper conductor pull-out test values 36 Table S.1 Specific tests for photovoltaic systems 42 Table S.2 Action cycle times 44 Table S.3 Special test 44 Table T.1 Special tests for road vehicles 45 Table T.2 Un=12V system supply voltage 48 Table T.3 Un=24V system supply voltage 49 Table T.4 PSD vs. frequency 50 Table T.5 PSD vs. frequency 52 Table T.6 PSD vs. frequency, additional test when the natural frequency fn of the device under test is less than 30 Hz 52ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 10 of GB/T 21711 "Basic electromechanical relays". GB/T 21711 has been published in the following parts. --- Part 1.General and safety requirements; --- Part 2.Reliability; --- Part 2-1.Reliability B10 value verification procedure; --- Part 3.Forced positioning (mechanical interlocking) contact relays; --- Part 7.Test and measurement procedures. --- Part 10.Additional functional characteristics and safety requirements for large capacity relays. This document is equivalent to IEC 61810-10.2019 "Basic electromechanical relays - Part 10.Additional functional characteristics of large capacity relays and Safety Requirements. The following minimal editorial changes were made to this document. --- According to the content of 14.2, the additional reference of the test items of "threaded terminal and non-threaded terminal (when applicable)" in Table 1 is increased "IEC 60999-2"; --- Added Note 2 to Table 4. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Electrical Relays (SAC/TC217). This document was drafted by. Xiamen Hongfa Electroacoustic Co., Ltd., Kunshan Guoli Electronic Technology Co., Ltd., Xiamen Hongfa Electric Power Co., Ltd. Co., Ltd., Zhangzhou Hongfa Electroacoustic Co., Ltd., Zhejiang Hongzhou New Energy Technology Co., Ltd., and China Electronics Technology Standardization Institute. The main drafters of this document are. Lin Weilin, Lu Ningyi, Ji Yan, Zhou Yanmei, Liu Xufeng, Hong Yaosheng, Zhu Yiqing, Yang Yanli and Wang Jue.IntroductionIn order to standardize the development, testing, quality assessment and use of relay products in my country and promote the steady and coordinated development of the relay industry, this GB/T 21711 "Basic Electromechanical Relays". GB/T 21711 is the basic product specification for various basic electromechanical relays. It is planned to consist of seven parts. composition. --- Part 1.General and safety requirements. The purpose is to determine the basic electromechanical relays used in various fields of electrical or electronic engineering Functional and safety requirements and safety related characteristics. --- Part 2.Reliability. The purpose is to standardize the requirements for reliability assessment of basic electromechanical relays. --- Part 2-1.Reliability B10 value verification procedure. The purpose is to standardize the reliability index assessment of basic electromechanical relays and reliability growth requirements assessment requirements. --- Part 3.Forced positioning (mechanical interlocking) contact relays. The purpose is to add applicable Special requirements for forced positioning (mechanical interlocking) contact relays. --- Part 4.General and safety requirements for reed relays. The purpose is to provide reed relays suitable for general control circuits. Establish basic functional and safety requirements. --- Part 7.Test and measurement procedures. The purpose is to specify the test and measurement procedures applicable to basic electromechanical relays. --- Part 10.Additional functional characteristics and safety requirements for large capacity relays. The purpose is to Add additional functional characteristics and safety requirements applicable to large-capacity relays. Basic Electromechanical Relays Part 10.Additional functional characteristics and features of large capacity relays Security Requirements1 ScopeThe additional functional and safety requirements in this document apply to basic electromechanical relays (non-definite time all or nothing relays) with high capacity requirements, Large capacity requirements such as breaking or short-circuiting capabilities, similar to low voltage electrical equipment. These relays incorporate a specific design (such as magnetic arc blowing) Used to extinguish the arc between contacts, or use insulation coordination not covered by GB/T 21711.1-2023 (such as using gas to fill the contact cavity). (fill), or safety assessment requirements not covered by GB/T 21711.1-2023 (such as higher loads). This document defines additional requirements for high capacity relays with general performance that can be used in smart grids, electric vehicles and Other applications, such as switching for battery charge/discharge, include. a) Electrical energy storage systems; b) Photovoltaic energy systems; c) electric road vehicles and electric construction vehicles; d) power electronic systems and equipment; e) cells and batteries; f) Road vehicles. Compliance with the requirements of this document is verified by specified type tests.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 16935.1-2023 Insulation coordination for equipment in low voltage systems Part 1.Principles, requirements and tests (IEC 60664-1. 2020, IDT) Note. There is no technical difference between the referenced content of GB/T 16935.1-2023 and the referenced content of IEC 60664-1.2007. GB/T 21711.1-2023 Basic electromechanical relays Part 1.General and safety requirements (IEC 61810-1.2015, IDT) GB/T 21711.7-2018 Basic electromechanical relays Part 7.Test and measurement procedures (IEC 61810-7.2006, IDT) IEC 60060-1.2010 High-voltage test technology Part 1.General definitions and test requirements (High-voltagetesttech- Note. GB/T 16927.1-2011 High voltage test technology Part 1.General definitions and test requirements (IEC 60060-1.2010, MOD) Part 2-14.Tests-TestN.Changeoftemperature) Note. GB/T 2423.22-2012 Environmental testing Part 2.Test method Test N. Temperature change (IEC 60068-2-14.2009, IDT) cedures-Part 2-17.Tests-TestQ.Sealing) Note. GB/T 2423.23-2013 Environmental testing Part 2.Test methods Test Q. Sealing (IEC 60068-2-17.1994, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21711.10-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 21711.10-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21711.10-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21711.10-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
