GB/T 20115.1-2021 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20115.1-2021: Basic specifications for industrial fuel fired installations - Part 1: General Status: Valid GB/T 20115.1: Historical versions
Basic dataStandard ID: GB/T 20115.1-2021 (GB/T20115.1-2021)Description (Translated English): Basic specifications for industrial fuel fired installations - Part 1: General Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K61 Word Count Estimation: 18,146 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 20115.1-2021: Basic specifications for industrial fuel fired installations - Part 1: General---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Basic specifications for industrial fuel fired installations - Part 1.General ICS 25.180.10 CCSK61 National Standards of People's Republic of China Replace GB/T 20115.1-2006 Basic technical conditions for industrial fuel heating devices Part 1.General part Released on 2021-10-11 2022-05-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee Table of contentsForeword Ⅲ Introduction Ⅴ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Product classification and naming 2 5 Technical requirements 3 5.1 Design requirements 3 5.2 Fuel and furnace type selection 4 5.3 Furnace type and structure selection 4 5.4 Selection of combustion method 4 5.5 Design of the combustion device 4 5.6 Selection and use of waste heat recycling device 5 5.7 Furnace lining material and structure selection 5 5.8 Selection of smoke exhaust method 5 5.9 Energy utilization 5 5.10 Design calculation 5 5.11 Piping design in front of the furnace 6 5.12 Safety and environmental protection 6 5.13 Structure 6 5.14 Materials 7 5.15 Accessories 7 5.16 Package requirements 7 5.17 Manufacturing requirements 7 5.18 Performance requirements 8 5.19 Product Manual 8 6 Test method 9 7 Inspection rules 9 7.1 Acceptance form 9 7.2 Factory inspection 9 7.3 Process inspection 9 7.4 Industrial operation inspection 10 7.5 Technical appraisal 10 7.6 Inspection of self-made accessories 10 7.7 Energy consumption grading 10 8 Marking, packaging, transportation and storage 10 8.1 Sign 10 8.2 Packaging and transportation 11 8.3 Storage 11 9 Ordering and supply 11 9.1 Order 11 9.2 Special requirements of users 11 9.3 Supply basis 11 9.4 Quality Assurance 12ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is the first part of GB/T 20115 "Basic Technical Requirements for Industrial Fuel Heating Devices". GB/T 20115 has issued such Lower part. ---Part 1.General part. This document replaces GB/T 20115.1-2006 "Basic Technical Requirements for Fuel Heating Equipment Part 1.General Part", and Compared with GB/T 20115.1-2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows. ---Added terms such as fuel, combustion, combustion method, combustion device, industrial fuel heating device, air surplus coefficient, unit energy consumption, etc. Definition (see Chapter 3); ---Changed the product classification, product specifications and naming requirements of industrial fuel heating devices (see Chapter 4, Chapter 4 of the.2006 edition); ---Added design requirements for the application of new combustion control technology and energy saving and environmental protection technology (see 5.1); ---Changed the selection basis of fuel and furnace type (see 5.2, 5.3 of the.2006 edition); ---Changed the selection basis of furnace type and structure (see 5.3, 5.2 of the.2006 edition); ---Added the basis for the selection of combustion methods (see 5.4); ---Changed the basis for the selection of combustion devices for different furnace types (see 5.5, 5.5 in the.2006 edition); ---Changed the selection basis of the preheater (see 5.6, 5.4 in the.2006 edition); ---Changed the selection basis of furnace lining material and structure (see 5.7, 5.6 of the.2006 edition); ---Changed the selection basis of the smoke exhaust method (see 5.8, 5.7 in the.2006 edition); ---Changed the technical parameters that need to be approved for design calculations, such as excess air coefficient, flue gas volume, etc. (see 5.10,.2006 edition of 5.9); ---Deleted the design requirements for the piping in front of the furnace (see 5.10.1 in the.2006 edition); ---Changed the principle of selection of pipe material specifications (see 5.11.2, 5.10.3 in the.2006 edition); --- Changed the safety and environmental protection requirements (see 5.12, 5.11 in the.2006 edition); ---Changed the structural requirements of the furnace body (see 5.13, 5.12 of the.2006 edition); --- Changed the material requirements (see 5.14, 5.13 of the.2006 edition); --- Changed the requirements for supporting parts (see 5.15, 5.14 of the.2006 edition); ---Change the set of requirements (see 5.16, 5.15 in the.2006 edition); --- Changed the manufacturing requirements (see 5.17, 5.16 of the.2006 edition); ---Change the requirements of the product specification (see 5.19, 5.18 of the.2006 edition); ---The factory inspection requirements are changed (see 7.2, 7.2 of the.2006 edition); ---The process inspection requirements are changed (see 7.3, 7.3 of the.2006 edition); --- Changed the technical appraisal requirements (see 7.5, 7.5 in the.2006 edition); --- Changed the energy consumption grading requirements (see 7.7,.2006 edition of 7.7). Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Industrial Electric Heating Equipment Standardization Technical Committee (SAC/TC121). Drafting organizations of this document. Xi'an Electric Furnace Research Institute Co., Ltd., Shaanxi Energy Vocational and Technical College, Henan Tianli Thermal Equipment Co., Ltd. Company, Xiamen Xiaoxun New Energy Technology Co., Ltd., Xi'an Jingzhongsheng Technology Co., Ltd., Yiwu Limai New Material Co., Ltd., Xi'an Flat Heat Treatment Co., Ltd., Zhangzhou Mingde Industry and Trade Co., Ltd., Xi'an Institute of Standardization. The main drafters of this document. Zhang Jianhua, Li Kun, Yu Weijiang, Cao Jiao, Yang Jia, Tong Binbin, Cheng Shuming, Li Zhenqing, Chen Peixian, Yi Zhonghui, Pi Kunlin, Lei Zhen, Ye Yongshun, Zhang Yongwu. The previous versions of this document and the documents replaced are as follows. ---In.2006, it was first published as GB/T 20115.1-2006; ---This is the first revision.IntroductionIndustrial fuel heating devices are commonly known as fuel furnaces, which usually include three heat sources. coal, oil, and gas, covering low, medium, and high temperature ranges. It is suitable for different heating and heat treatment processes such as normalizing, tempering, annealing and aging, including push rod type, roller bottom type, stepping type, rotating bottom type and many other furnaces. The type structure is widely used in our country, and it is called an industrial furnace in parallel with the electric heating device. For a long time, the output value of fuel heating devices has been Although the domestic and foreign market share of heat is as high as 60% to 70% (especially gas stoves are highly efficient and cheap, with burners and pulse combustion control The development of technology has been continuously promoted and applied), but the principle of product classification of fuel heating devices is not clear, the level is not clear, and the standard system is not perfect. for Grasp the technical basic conditions of the product from the source, as a comprehensive electromechanical complete set of heating equipment, refer to the furnace type structure and thermal engineering system of the electric heating device For technical requirements such as temperature and production use, a series of standards of GB/T 20115 "Basic Technical Conditions for Industrial Fuel Heating Installations" are formulated. GB/T 20115 It aims to stipulate the product classification of industrial fuel heating devices and the requirements in terms of design, manufacturing, safety, energy saving and environmental protection, performance and complete sets. To meet the requirements, it is planned to consist of 9 parts. ---Part 1.General part. The purpose is to specify the general technical requirements for various fuel heating devices. --- Part 11.Fuel, combustion method and combustion device. The purpose is to specify the types of fuels and combustion methods that meet the needs of the production process. The basic basis and technical requirements for the selection and design of the type and combustion device. ---Part 12.Safety and energy saving and utilization of fuel heating device. The purpose is to specify the safety technical requirements for fuel heating devices Requirements, and technical requirements for efficient and green utilization of fuels such as furnace lining insulation structural materials, flue gas waste heat utilization devices, preheaters, etc. ---Part 2.Gas heating device. The purpose is to specify the design, manufacturing, safety, energy saving and environmental protection, performance of gas heating devices And complete sets of special technical requirements that need to be met. ---Part 21.Gas heating heat treatment furnace. The purpose is to stipulate that gas heating can achieve quenching, annealing, normalizing, tempering, aging, permeation Special technical requirements for gas-fired heat treatment furnaces for heat treatment processes such as carbon, nitriding, and heat preservation. ---Part 22.Gas heating furnace. The purpose is to stipulate that gas heating furnaces that achieve heating functions such as smelting and smelting are used in Special technical requirements that need to be met in terms of design, manufacturing, safety, energy saving and environmental protection, performance and complete sets. ---Part 23.Gas heating furnaces for other purposes. The purpose is to stipulate the design, manufacture, safety, and energy saving of gas heating furnaces for other purposes. Special technical requirements that need to be met in terms of energy and environmental protection, performance and complete sets. ---Part 3.Fuel oil heating device. The purpose is to stipulate the design, manufacture, safety, energy saving and environmental protection, performance of fuel heating devices And complete sets of special technical requirements that need to be met. ---Part 4.Coal-fired heating device. The purpose is to stipulate the design, manufacturing, safety, energy saving and environmental protection, performance of coal-fired heating devices And complete sets of special technical requirements that need to be met. The dedicated parts of various fuel heating devices are formulated based on the general parts. In the dedicated section, for the different types of fuel heating devices Features, supplement and improve the relevant regulations in the general part respectively. Basic technical conditions for industrial fuel heating devices Part 1.General part1 ScopeThis document specifies the technical requirements, test methods, and inspection regulations for various types of industrial fuel heating devices (hereinafter referred to as fuel heating devices). Rules, markings, packaging, transportation, storage, and order supply. This document applies to the use of solid, liquid and gaseous fuels for heating, and for various industrial applications such as heating, smelting, heat treatment, and physical and chemical reactions. Fuel heating device. Note. Gas heating furnaces for steelmaking and forging such as refining furnaces, steel rolling heating furnaces, pit type, trolley, push rod, walking type, cover type, mesh belt type, vibration bottom type, and bottom type heating furnace Quenching, annealing, normalizing, tempering, aging, carburizing, nitriding, holding furnaces for processing, and other such as ceramic kilns, tunnel kilns, push kilns, roller hearth kilns, bell kilns, Cement kilns, rotary kilns, exhaust furnaces, diffusion furnaces, epitaxial furnaces, single crystal furnaces, roasting furnaces, drying furnaces, sintering furnaces, brazing furnaces, incinerators and other forms and uses Fuel heating furnace furnace. This document does not apply to household and similar fuel heating appliances, heating facilities, baking equipment, etc. Power and quality industrial boilers with steam, hot water or other working fluids.2 Normative referencesThe contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 2587-2009 General rules for energy balance of energy-using equipment GB/T 2900.23-2008 Electrical terminology industrial electric heating device GB/T 3766-2015 General rules and safety requirements for hydraulic transmission systems and their components GB/T 3797-2016 Electrical control equipment GB/T 4272-2008 General Rules for Equipment and Pipeline Insulation Technology GB/T 4879-2016 Anti-rust packaging GB/T 5048-2017 Moisture-proof packaging GB/T 5959.1-2019 Safety of Electric Heating and Electromagnetic Processing Equipment Part 1.General Requirements GB 7231-2003 Basic identification colors, identification symbols and safety signs of industrial pipelines GB/T 10067.1-2019 Basic technical conditions for electric heating and electromagnetic processing equipment Part 1.General parts GB/T 12467-2009 (all parts) Quality requirements for fusion welding of metallic materials GB/T 13306-2011 signs GB/T 13324-2006 Terminology for heat treatment equipment GB/T 13338-2018 Basic rules for the measurement and calculation of the heat balance of industrial fuel furnaces GB/T 13384-2008 General technical conditions for packaging of mechanical and electrical products GB/T 17195-1997 Terminology of Industrial Furnace GB/T 20116.1-2006 Test methods for fuel heating devices Part 1.General parts GB/T 30839.1-2014 Energy consumption grading of industrial electric heating devices Part 1.General requirements ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20115.1-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 20115.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20115.1-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20115.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 20115.1-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20115.1-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
