GB/T 20000.6-2024 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20000.6-2024: Rules for standardization - Part 6: Guidelines for good practice Status: Valid GB/T 20000.6: Historical versions
Basic dataStandard ID: GB/T 20000.6-2024 (GB/T20000.6-2024)Description (Translated English): Rules for standardization - Part 6: Guidelines for good practice Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A00 Classification of International Standard: 01.120 Word Count Estimation: 14,169 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Older Standard (superseded by this standard): GB/T 20000.6-2006 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 20000.6-2024: Rules for standardization - Part 6: Guidelines for good practice---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 01.120 CCSA00 National Standards of People's Republic of China Replaces GB/T 20000.6-2006 Standardized activity rules Part 6.Good practice guidance Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General Principles 1 4.1 Open 1 4.2 Fairness 2 4.3 Transparency 2 4.4 Consensus 2 4.5 Applicability 2 4.6 Coordination 2 5 Management of standardization bodies 2 5.1 Organizational Structure 2 5.2 System Documents 3 5.3 Working Mechanism 3 6 Documentation Process 4 6.1 General Rules 4 6.2 Preparatory stage 4 6.3 Project Establishment Stage 4 6.4 Drafting stage 5 6.5 Comments solicitation stage 5 6.6 Technical Review Stage 5 6.7 Approval for Release Stage 5 6.8 Documentation Maintenance 6 7 Drafting of documents 6 8 Participation in standardization activities 6 9 Coordination and cooperation with other standardization bodies 6 References 8ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. GB/T 20000 "Rules for Standardization Activities" and GB/T 1 "Guidelines for Standardization Work", GB/T 20001 "Rules for Drafting Standards", GB/T 20002 "Guidelines for the preparation of specific contents in standards", GB/T 20003 "Special procedures for the preparation of standards" and GB/T 20004 "Group Standardization” together constitute the basic national standard system to support standardization work. This document is part 6 of GB/T 20000 "Rules for Standardization Activities"1). GB/T 20000 has published the following parts. --- Part 1.Common terms for standardization and related activities; --- Part 3.Referenced documents; --- Part 6.Good practice guidance; --- Part 8.Principles and guidelines for the use of the phase code system; --- Part 10.General principles for translation of English versions of national standards; --- Part 11.Common expressions of English translations of national standards. This document replaces GB/T 20000.6-2006 "Guidelines for Standardization Work Part 6.Code of Good Practice for Standardization" and Compared with GB/T 20000.6-2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The definitions of standardization bodies, standards bodies and national standards bodies have been deleted (see 3.1, 3.2 and 3.3 of the.2006 edition); b) Added the definitions of interested parties and participants (see 3.1 and 3.2); c) Changed “General Principles” to “Overall Principles”, subdivided into six principles, and added the content and corresponding guidance of each principle (see Section 4 Chapter 4 of the.2006 edition); d) Added a chapter on “Management of Standardization Bodies” (see Chapter 5); e) Changed "Principles of Standards Development Procedure" to "Document Development Procedure", added the stages of document development procedure and the stages of each stage work content, guidance and suggestions (see Chapter 6, Chapter 5 of the.2006 edition); f) The “principles for the preparation of standards to promote trade” was changed to “drafting of documents”, and the relevant rules for drafting documents were rewritten (see No. 7 Chapter 6 of the.2006 edition); g) Changed “participation in the standard setting process” to “participation in standardization activities”, and added guidance and specific measures to improve the participation of stakeholders. Specific recommendations (see Chapter 8, Chapter 7 of the.2006 edition); h) Changed “cooperation and communication on standardization” to “coordination and cooperation with other standardization bodies” and added “coordination and cooperation with other standardization bodies” Specific recommendations for effective coordination and collaboration (see Chapter 9, Chapter 8 of the.2006 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee on Standardization Principles and Methods of Standardization (SAC/TC286). This document was drafted by. China National Institute of Standardization, China Aviation Technology Research Institute, China Building Standard Design Institute Co., Ltd. company. The main drafters of this document are. Che Di, Wang Yiyi, Bai Dianyi, Pang Zhenghu, Liu Shenzhai, Du Xiaoyan, Li Jia, Ding Shuwei, Liu Xize, Cai Chengjun, Niu Nana, Bai Demei. The previous versions of this document and the documents it replaces are as follows. First released in.2006, and this is the first revision. 1) The name of GB/T 20000 has been changed from "Guidelines for Standardization Work" to "Rules for Standardization Activities". The main element of the file name of other parts is currently still "Guidelines for Standardization Work", which will be adjusted to "Rules for Standardization Activities" after revision.IntroductionStandardization is the activity of developing and applying standards to establish the best order and promote common benefits. Carrying out standardization activities in an orderly manner, promoting the realization of standardization goals and benefits, and establishing rules for standardization activities have become the focus of various standardization organizations at home and abroad. The primary task of carrying out standardization activities. In this regard, my country has established a basic national standard system to support standard setting. In this standard system, GB/T 20000 "Rules for Standardization Activities" aims to establish general rules and regulations for the orderly development of matters related to standardization activities. Provide guidance, which is intended to consist of the following parts. --- Part 1.Common terms for standardization and related activities. The purpose is to define common terms for standardization and related activities. and definitions in order to provide a basis for mutual communication in standardization activities. --- Part 3.Guidelines for the reference of standards in regulations. The purpose is to establish the general Specific principles and relevant rules to provide technical support for the effective implementation of laws and regulations. --- Part 6.Good practice guide. The purpose is to establish the overall principles for conducting standardization activities, provide guidance, suggestions or give relevant information so that standardization activities can be carried out in an orderly and effective manner. --- Part 8.Principles and guidelines for the use of the phase code system. The purpose is to provide Provide guidance, advice or information to facilitate identification of the stage in the development process of a normative document. --- Part 10.Translation of English versions of national standards. The purpose is to establish relevant rules for the translation of English versions of national standards. to promote the use of standardized documents in international trade, communication and cooperation. Good management and operation of standardization organizations, orderly development of standardization activities, and standardized drafting of documents will help standardization activities to be carried out as much as possible. To this end, ISO and IEC issued ISO /IEC Guide 59.1994 "Code of Good Practice in Standardization" in.1994. In.2006, China revised and adopted this document to form GB/T 20000.6-2006 "Guidelines for Standardization Work Part 6.Good Practice in Standardization" The Standard provides general guidance to standardization bodies on standard setting procedures, principles for standard formulation, and participation and cooperation in standardization. In.2019, ISO and IEC released a new version of ISO /IEC Guide 59.2019 “ISO and IEC Recommended Standardization Practices for National Institutions”. The Guide provides ISO and IEC national bodies with a guide to comply with the requirements of the World Trade Organization Technical Barriers to Trade (WTO/TBT) Agreement. In order to adapt to new development needs and promote coordination with the principles and spirit of international standardization good practice, it is necessary to Revised and improved GB/T 20000.6-2006. This document was prepared with reference to ISO /IEC Guide 59.2019 “ISO and IEC recommended practices for national bodies in the area of standardization”. The WTO/TBT Code of Good Practice for the Preparation, Approval and Application of Standards and the WTO/TBT Committee on the Development of International Standards Guidelines and recommendations, following the principles and practices of these documents, focusing on the overall The document provides a comprehensive set of principles and clarifies good practices in the management, document development, coordination and cooperation of standardization organizations. The relevant management system documents are formulated and implemented based on the recommendations, which will help standardization activities comply with the good practices of WTO, ISO and IEC. Practice rules, so that the principles and directions for standardization activities carried out by standardization bodies, their standardization technical organizations and participants are clearer and more explicit. This will help to achieve standardization goals and benefits. Standardized activity rules Part 6.Good practice guidance1 ScopeThis document establishes the general principles for conducting standardization activities, provides the management of standardization bodies, the development procedures and drafting of documents, and It provides guidance and suggestions on good practices in the areas of participation in standardization activities, coordination and cooperation with other standardization bodies, and provides relevant information. This document applies to standardization activities carried out by standardization bodies and their standardization technical organizations and participants. Note 1.In order to avoid confusion, the "standardization documents" in this document are referred to as "documents". Note 2.Standardization technical organizations refer to technical committees (including sub-technical committees) and drafting working groups.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 1.1 Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents GB/T 1.2 Guidelines for standardization work Part 2.Rules for drafting standardization documents based on ISO /IEC standardization documents GB/T 20000.1 Guidelines for standardization work Part 1.Common terms for standardization and related activities GB/T 20001 (all parts) Standard Drafting Rules GB/T 20002.6 Guidelines for the preparation of specific contents in standards Part 6.Requirements involving small, medium and micro enterprises GB/T 20003.1 Special procedures for the formulation of standards Part 1.Standards involving patents3 Terms and definitionsThe terms and definitions defined in GB/T 1.1 and GB/T 20000.1 and the following apply to this document. 3.1 interested party Individuals or organizations that can influence, are affected by, or perceive themselves to be affected by a decision or activity. 3.2 participant Stakeholders (3.1) who have directly participated in the development of the document. Note. Participants usually include technical committee members, drafting working group members, and relevant parties who provide comments on the document.4 General Principles4.1 Openness Openness means that any interested party that meets the established conditions can join the corresponding standardization organization and its standardization technical organization, participate in the document Standardization organizations should formulate institutional documents to ensure that relevant parties within a given scope are qualified to become standardization organizations. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20000.6-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 20000.6-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20000.6-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20000.6-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 20000.6-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20000.6-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
