GB/T 19510.203-2023 English PDFUS$849.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19510.203-2023: Controlgear for electric light sources - Part 2-3: Particular requirements for a. c. and/or d. c. supplied electronic control gear for fluorescent lamps Status: Valid
Basic dataStandard ID: GB/T 19510.203-2023 (GB/T19510.203-2023)Description (Translated English): Controlgear for electric light sources - Part 2-3: Particular requirements for a. c. and/or d. c. supplied electronic control gear for fluorescent lamps Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140.99 Word Count Estimation: 42,441 Date of Issue: 2023-12-28 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB 19510.4-2009; GB 19510.5-2005; GB 19510.6-2005; GB 19510.7-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 19510.203-2023: Controlgear for electric light sources - Part 2-3: Particular requirements for a. c. and/or d. c. supplied electronic control gear for fluorescent lamps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 29:140:99 CCSK74 National Standards of People's Republic of China Replace GB 19510:4-2009, GB 19510:5-2005, GB 19510:6-2005, GB 19510:7-2005 Light source control devices Part 2-3: For fluorescent lamps Special requirements for AC and/or DC electronic controls forfluorescentlamps forfluorescentlamps,MOD) Published on 2023-12-28 and implemented on 2026-01-01 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General requirements 2 5 General requirements for testing 2 6 Category 2 7 signs 3 8 Measures to prevent accidental contact with live parts 3 9 Terminal 3 10 Grounding regulations 3 11 Moisture proof and insulation 3 12 Electrical strength 3 13 Heat resistance test of winding 4 14 Fault status 4 15 Protection measures for associated parts 4 16 Abnormal status 5 17 Status of the control device at the end of lamp life 6 18 Structure 11 19 Creepage distances and clearances11 20 Screws, current-carrying parts and connections 11 21 Heat, fire and marking resistance11 22 Corrosion resistance11 Appendix A (Normative) Tests to determine whether conductive parts are live parts that may cause electric shock 16 Appendix B (normative) Special requirements for thermally protected control devices17 Appendix C (normative) Special requirements for light source electronic control devices with thermal protectors18 Appendix D (Normative) Heating test requirements for thermally protected control devices 19 Appendix E (normative) Application of constant S different from 4500 in tw (winding temperature) test 20 Appendix F (Normative) Windshield 21 Appendix G (normative) Derivation method of pulse voltage value 22 Appendix H (Normative) Test 23 Appendix I (normative) Measurement method of high-frequency leakage current 24 Appendix J (Normative) Special supplementary safety requirements for AC, AC/DC or DC electronic control devices for emergency lighting28 Appendix K (informative) Components used in the asymmetric pulse test circuit (Figure 1) 31 Appendix L (Normative) Control device design information 32 Reference 33 Figure 1 Asymmetric pulse test circuit 7 Figure 2 Asymmetric power measurement circuit 8 Figure 3 Disconnect filament test circuit 10 Figure 4 Rectification effect test 12 Figure 5 Capacitive leakage current limit chart of high-frequency fluorescent lamps13 Figure I:1 Various fluorescent lamp leakage current test methods 24 Table 1 Relationship between operating voltage (effective value) and maximum allowable peak voltage 4 Table J:1 Pulse voltage 30 Table K:1 Material specifications31 Table K:2 Transformer specifications 31ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 2-3 of GB/T 19510 "Light Source Control Device": GB/T 19510 has published the following parts: ---Part 1: General requirements and safety requirements; ---Part 2-1: Special requirements for starting devices (except glow starters); ---Part 2-2: Special requirements for DC/AC electronic buck converters for tungsten lamps; ---Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps; ---Part 2-7: Special requirements for electronic control devices powered by safety service power supply (ESSS) for emergency lighting (self-contained); ---Part 2-8: Special requirements for ballasts for fluorescent lamps; ---Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps); ---Part 2-10: Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps); ---Part 2-11: Special requirements for miscellaneous electronic circuits used with lamps; ---Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps); ---Part 2-13: Special requirements for DC or AC electronic control devices for LED modules: This document replaces GB 19510:4-2009 "Lamp control devices - Part 4: Special requirements for AC electronic ballasts for fluorescent lamps" "Requirements", GB 19510:5-2005 "Lamp control devices Part 5: Special requirements for DC electronic ballasts for general lighting", GB 19510:6-2005 "Lamp control devices Part 6: Special requirements for DC electronic ballasts for lighting in public transportation vehicles" and GB 19510:7-2005 "Lamp control devices - Part 7: Special requirements for DC electronic ballasts for aircraft lighting": this document Mainly based on GB 19510:4-2009, it integrates the content of GB 19510:5-2005, GB 19510:6-2005 and GB 19510:7-2005: Compared with GB 19510:4-2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows: ---The scope has been changed to include electronic control devices using DC power supply, while clearly distinguishing between central power supply and non-central power supply: Applicable standards for electronic control devices for emergency lighting: The special requirements in Appendix J are only for centrally powered emergency lighting: Electronic control devices, requirements for non-centrally powered emergency lighting control devices are given in GB/T 19510:207-2023 (see Section 1 Chapter, Chapter 1 of GB 19510:4-2009); ---Added the terms and definitions of "DC electronic control device" (see 3:7); ---Added the content of DC power control device (see 7:2 and Chapter 14); ---Added "increased abnormal states of DC electronic control devices" (see 16:2); ---Deleted Figure 1a), added "Figure 4a) First direction test of rectification effect", "Figure 4b) Reverse direction test of rectification effect", changed Change the figure title: Figure 1b) to Figure 4c) (see Figure 4, Figure 1 of GB 19510:4-2009); ---Added "Figure I:1b) ~ Figure I:1g)" and legends (see Appendix I); ---Deleted "continuous emergency lighting", "electrical appliances for AC/DC continuous emergency lighting", "base ballast", "base lamp" and "base ballast" Definition of "calibration current of current converter" and "pre-start time" (J:2 of GB 19510:4-2009); ---Added the definition of "emergency ballast lumen coefficient" (see J:2:6); --- Added "functional safety" (EBLF) (see J:14): This document is modified to adopt IEC 61347-2-3:2016 "Lamp control devices - Part 2-3: AC and/or DC electronics for fluorescent lamps" Special Requirements for Control Devices": The technical differences between this document and IEC 61347-2-3:2016 and their reasons are as follows: ---Replaced IEC 60929 with normatively cited GB/T 15144-2000 for ease of use; ---Replaced IEC 61347-1 with normatively cited GB/T 19510:1-2023 for ease of use; ---Replaced IEC 61347-2-7 with normatively cited GB/T 19510:207-2023 for ease of use: The following editorial changes have been made to this document: ---In order to coordinate with existing standards, the name of the standard is changed to "Light source control device - Part 2-3: AC and/or DC power for fluorescent lamps" Special requirements for sub-control devices: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224): This document was drafted by: Zhejiang Shanggang Lighting Co:, Ltd:, Foshan Huaquan Electric Lighting Co:, Ltd:, Beijing Electric Light Source Research Institute Co:, Ltd: company: The main drafters of this document: Lu Junmin, Zeng Haisheng, and Yang Jianlin: The previous versions of the documents replaced by this document are as follows: ---GB 19510:4, first released in:2005, first revised in:2009; ---GB 19510:5, first released in:2005; ---GB 19510:6, first released in:2005; ---GB 19510:7, first released in:2005:IntroductionWith the development of light source control device technology, the safety specifications of the previous version of the light source control device can no longer be adapted to meet the current light source control requirements: Technical requirements and product safety requirements of the device: Safety requirements ensure that electrical equipment is correctly installed, maintained and used in the manner intended Reduce harm to people, livestock or property: GB/T 19510 "Light Source Control Device" updates the technical and safety requirements to the regulations: It is of great significance to standardize light source control devices, reduce product safety risks, improve product quality, and enhance the competitiveness of our products: GB/T 19510 aims to standardize light source control devices and is intended to consist of the following parts: ---Part 1: General requirements and safety requirements: The purpose is to standardize the general requirements for control devices and their safety requirements: ---Part 2-1: Special requirements for starting devices (except glow starters): The purpose is to standardize starting devices (except glow starters) (external) special requirements for safety requirements: ---Part 2-2: Special requirements for DC/AC electronic step-down converters for tungsten lamps: The purpose is to standardize the direct use of tungsten filament lamps Special requirements for safety requirements of current/AC electronic buck converters: ---Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps: The purpose is to standardize AC for fluorescent lamps and/or special requirements for safety requirements of DC electronic control devices: ---Part 2-7: Special requirements for electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained): Purpose Special requirements for regulating the safety requirements of electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained): ---Part 2-8: Special requirements for ballasts for fluorescent lamps: The purpose is to standardize special safety requirements for ballasts for fluorescent lamps: Require: ---Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (except fluorescent lamps): The purpose is to standardize discharge lamps (fluorescent lamps Except) special requirements for safety requirements for electromagnetic control devices: ---Part 2-10: Special requirements for electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps): The purpose is Special requirements for regulating the safety requirements of electronic inverters and frequency converters for high-frequency cold start tubular discharge lamps (neon lamps): ---Part 2-11: Special requirements for miscellaneous electronic circuits used with lamps: The purpose is to standardize miscellaneous electronics used in conjunction with lamps Special requirements for line safety requirements: ---Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (except fluorescent lamps): The purpose is to regulate discharge Special requirements for the safety of DC or AC electronic ballasts for lamps (other than fluorescent lamps): ---Part 2-13: Special requirements for DC or AC electronic control devices for LED modules: The purpose is to standardize the use of LED modules Special requirements for safety requirements for DC or AC electronic control devices: This document is used together with GB/T 19510:1, which is revised after supplementing or modifying the corresponding provisions of GB/T 19510:1 made: This document and GB/T 19510:201~GB/T 19510:213 stipulate this when citing any clause of GB/T 19510:1: The scope of application of the clauses and the test sequence of each test are specified, and necessary supplementary requirements are specified: Each part of GB/T 19510 is independent Established without reference to each other to facilitate future revisions and revisions: If deemed necessary, new requirements will be added: Light source control devices Part 2-3: For fluorescent lamps Special requirements for AC and/or DC electronic controls1 ScopeThis document specifies the requirements for electronic control devices for use with fluorescent lamps described in IEC 60081 and IEC 60901 and other high-frequency fluorescent lamps: Special safety requirements, this control device uses an AC power supply of 50Hz or 60Hz not greater than 1000V and/or not greater than 1000V DC power supply, its operating frequency is different from the power frequency: Performance requirements are given in IEC 60929: Special requirements for electronic control devices with overheating protectors are given in Appendix C: For emergency lighting work, special requirements for centrally powered control devices are given in Appendix J: Suitable for emergency lighting safety work The performance requirements are also included in Appendix J: The requirements for non-centrally powered emergency lighting control devices are given in GB/T 19510:207-2023: Note: The performance requirements given in Appendix J are those related to reliable emergency working safety:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 15144-2020 Performance requirements for AC and/or DC electronic control devices for tubular fluorescent lamps (IEC 60929:2015, IDT) GB/T 19510:1-2023 Light source control device Part 1: General requirements and safety requirements (IEC 61347-1:2017, MOD) GB/T 19510:207-2023 Light source control device Part 2-7: Safety service power supply (ESSS) for emergency lighting (self-contained) Special requirements for power supply electronic control devices (IEC 61347-2-7:2021, MOD) Note: GB/T 18595-2014 Electromagnetic compatibility and immunity requirements for general lighting equipment (IEC 61547:2009, IDT)3 Terms and definitionsThe terms and definitions defined in Chapter 3 of GB/T 19510:1-2023 and the following terms and definitions apply to this document: 3:1 An AC-to-AC converter powered by the grid power supply and containing a stabilizing device, usually turns on one or several fluorescent lamps at high frequency: Move and work: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19510.203-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 19510.203-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19510.203-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19510.203-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
