GB/T 18842-2008 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18842-2008: Taper cylindrical involute splines
Status: Valid

GB/T 18842: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 18842-2008	329	Add to Cart	3 days	Taper cylindrical involute splines	Valid
GB/T 18842-2002	559	Add to Cart	4 days	Taper cylindrical involute splines	Obsolete

Similar standards

GB/T 17855   GB/T 18183   GB/T 14212   GB/T 45016   GB/T 28773   GB/T 11356.2   

Basic data

Standard ID: GB/T 18842-2008 (GB/T18842-2008)
Description (Translated English): Taper cylindrical involute splines
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J18
Classification of International Standard: 21.120.30
Word Count Estimation: 14,124
Date of Issue: 2008-09-27
Date of Implementation: 2009-05-01
Older Standard (superseded by this standard): GB/T 18842-2002
Quoted Standard: GB/T 1800.1; GB/T 3478.1-2008; GB/T 15758
Regulation (derived from): National Standard Approval Announcement 2008 No.16 (Total No.129)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the cone straight involute splines (hereinafter referred to as spline) terms, Code and definitions, calculated size, dimension series, tolerance level and with class, tolerance, parameter annotation, tables and other test methods and dimensions content. This standard applies to internal spline tooth straight, external spline tooth involute, standard pressure angle of 45 ��, modulus of 0. 50mm ~ 1. 50mm straight teeth and a conical taper 1: 15 involute splines.

GB/T 18842-2008: Taper cylindrical involute splines

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Taper cylindrical involute splines ICS 21.120.30 J18 National Standards of People's Republic of China Replacing GB/T 18842-2002 Straight bevel involute splines Posted 2008-09-27 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms, symbols and definitions 1 4 size calculation 2 5 Dimensions Series 3 6 tolerance levels and with Category 4 Tolerance 4 7 8 parameters marked 5 9 Test Method 6 Size 10 Table 6

Foreword

This standard is GB/T 18842-2002 "straight bevel involute spline" amendments. This standard compared with GB/T 18842-2002 main changes are as follows. --- According to GB/T 1.1-2000 requirements were modified editorial; --- Table 2, "The role of space width maximum EVmax = EVmin-λ" to "EVmax = Emax-λ"; --- Table 2 FOREIGN spline involute starting circle maximum formula "2" to "2 ×", "Dh" to "Db"; --- Table 8, "The role of the maximum tooth thickness 1.606" to "the role of the maximum tooth thickness of 1.660"; --- Table 8, "The role of the minimum tooth thickness 1.660" to "the role of minimum tooth thickness of 1.606"; --- Table 8 "6H GB/T 18842-2002" to "6k GB/T 18842-2008"; --- Table 9 to Table 13 "internal splines maximum actual space width" to "minimum effective space width EVmin = 0.5πm". This standard by the National Standardization Technical Committee axis machines and accessories and focal points. This standard was drafted. Mechanical Science Research Institute of Machine Productivity Promotion Center, Harbin Dongan Engine Co., Ltd, China's first FAW Group Corporation. The main drafters of this Standard. Chui Ming new, Chang Po-printing, giant Jianhui, Deng Takami. This standard replaces the standards previously issued as follows. --- GB/T 18842-2002. Straight bevel involute splines

1 Scope

This standard specifies the straight bevel involute splines (hereinafter referred to as splines) terminology, symbols and definitions, dimensions calculation formula, the size of the Department Column, tolerance level and fits the category, tolerances, annotation parameters, test methods and the size of the table and so on. This standard applies to internal spline tooth as a straight line, the external spline tooth involute, standard pressure angle of 45 °, modulus of 0.50mm ~ 1.50mm straight teeth and a conical taper 1.15 involute splines.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Part 1 GB/T 1800.1 Geometrical product specifications (GPS) Limits and fits. Tolerances, deviations and fits basis (GB/T 1800.1-2008, ISO 286-1. 1988, MOD) GB/T 3478.1-2008 Straight cylindrical involute splines (Metric module, side fit) - Part 1. General (ISO 4156-1.2005, MOD) GB/T 15758 spline basic terms 3 Terms, symbols and definitions 3.1 spline common terminology and definitions, see GB/T 15758. 3.2 spline special terminology, symbols and definitions Figure 1 and Figure 2. The following terms and definitions apply to this standard. 3.2.1 Provisions spline parameters, dimensions and tolerances of the end of the plane. Predetermined position of the base surface of the outer splines small end, and with the design of a given internal splines Base surface coincide. 3.2.2 Trail conical surface and spline shaft plane intersection line. 3.2.3 Internal splines same acute angle on both sides of the toothed gullet sandwiched. 3.2.4 Internal and external spline tapered spline axis pixel lines and sandwiched acute angle. 3.2.5 Distance from the base end to end spline small plane to. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18842-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18842-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18842-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18842-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 18842-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18842-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.