GB/T 18743.1-2022 English PDF

US$349.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18743.1-2022: Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 1: General test method
Status: Valid

GB/T 18743.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 18743.1-2022	349	Add to Cart	4 days	Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 1: General test method	Valid
GB/T 18743-2002	279	Add to Cart	3 days	Thermoplastics pipes for the transport of fluids -- Determination of impact by the Charpy method	Obsolete

Similar standards

GB/T 19472.1   GB/T 19472.2   GB/T 21302   GB/T 18743.2   GB/T 18742.2   GB/T 18742.1   

Basic data

Standard ID: GB/T 18743.1-2022 (GB/T18743.1-2022)
Description (Translated English): Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 1: General test method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Word Count Estimation: 17,141
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 18743.1-2022: Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 1: General test method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Thermoplastics pipes -- Determination of pendulum impact strength by the Charpy method -- Part 1.General test method ICS 83.140.30 CCSG33 National Standards of People's Republic of China Partially replaces GB/T 18743-2002 Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes Part 1.General test methods Published on 2022-04-15 2022-11-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is part 1 of GB/T 18743 "Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes". GB/T 18743 has The following sections have been published. --- Part 1.General test methods; --- Part 2.Test conditions for pipes of different materials. This document and GB/T 18743 Part 2 together replace GB/T 18743-2002 "Thermoplastic pipes for fluid transportation Compared with GB/T 18743-2002, in addition to structural adjustment and editorial changes, the main technical changes are as follows. a) Changed the description of the scope of application of the standard, and deleted this document for homopolymerization and copolymerization polypropylene pipes, unplasticized polyvinyl chloride pipes materials, modified high-impact PVC pipes, chlorinated PVC pipes, acrylonitrile-butadiene-styrene and acrylonitrile- Styrene-acrylic pipes (see Chapter 1, Chapter 1 of the.2002 edition); b) terms and definitions are added (see Chapter 3); c) Changed the principle (see Chapter 4, Chapter 3 of the.2002 edition); d) Added specimen type 4 and specimen type 5 for circumferential sampling (see Table 1, Table 1 of the.2002 edition); e) Added Method A, Method B and Method C (see 6.2, 6.3 and 6.4); f) Added sample preparation requirements and test methods for notched specimens (see 6.2, 6.3); g) Changed the pipe wall thickness range corresponding to specimen type 1 in Method A (see 6.2.1, 5.2.1 of the.2002 edition); h) The processing requirements for specimens with a wall thickness greater than 10.5mm for homopolymer and copolymer polypropylene pipes are deleted (see 6.2.2,.2002). version 5.1); i) Changed the state adjustment time (see Table 4, Table 2 of the.2002 edition). Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China National Light Industry Federation. This document is under the jurisdiction of the National Standardization Technical Committee of Plastic Products (SAC/TC48). This document is drafted by. Beijing Building Materials Inspection and Research Institute Co., Ltd., Shanghai Baidie Pipe Technology Co., Ltd., Chengde Jinan Jian Testing Instrument Co., Ltd., Yonggao Co., Ltd., Zhonglan Chenguang Chengdu Testing Technology Co., Ltd., SABIC (China) R&D Co., Ltd. Company, Akcome Enterprise Group (Shanghai) Co., Ltd., Maoming Liansu Building Materials Co., Ltd., China Petrochemical Corporation Beijing Chemical Research Institute Research Institute, Yada Plastic Products Co., Ltd., Petrochemical Research Institute of China National Petroleum Corporation, Baolu Qixing Pipe Industry Co., Ltd., Beijing Technology and Business University. The main drafters of this document. Li Yanjun, Zhang Xuehua, Ren Yufeng, Huang Jian, Zhang Yanjun, Cui Shengming, Qiu Qiang, Song Keming, Li Yu'e, Li Yu, Zhang Huaizhi, Xu Hongyue, Xiang Aimin, Xu Haiyun, Xie Jianling, Yang Feihua. The previous versions of this document and its superseded documents are as follows. ---First published in.2002 as GB/T 18743-2002; ---This is the first revision.

Introduction

GB/T 18743 "Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes" combined with the actual production and application of plastic pipe products in my country Grass, including general test methods and test conditions for pipes of different materials. --- Part 1.General test methods. The main contents include principles, equipment, samples, state adjustment and pretreatment, test procedures, and results It specifies the general test method for the determination of the impact strength of simply supported beams of thermoplastic pipes. --- Part 2.Test conditions for pipes of different materials. The main contents include the test conditions, specifying the different materials for thermoplastic pipes Test conditions for the determination of the impact strength of simply supported beams. Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes Part 1.General test methods

1 Scope

This document specifies a general test method for the determination of the impact strength of simply supported beams of thermoplastic tubing. --- Method A. Using unnotched samples, the results are expressed as a percentage of the number of damaged samples to the total number of samples. --- Method B. Use a single-notch specimen, and express the results in terms of impact strength. --- Method C. Use double-notched specimens and express the results in terms of impact strength. This document applies to the determination of the impact strength of simply supported beams of thermoplastic pipes.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 1043.1-2008 Determination of impact properties of plastic simply supported beams - Part 1.Non-instrumented impact test GB/T 2918 Standard Environment for Conditioning and Testing of Plastic Specimens GB/T 18743.2-2022 Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes-Part 2.Test of Pipes of Different Materials test conditions GB/T 19278-2018 General terms and definitions for thermoplastic pipes, fittings and valves GB/T 21189 Inspection of Pendulum Impact Testing Machine for Plastic Simply Supported Beams, Izod Beams and Tensile Impact Tests GB/T 39812 Machining Preparation of Plastic Samples

3 Terms and Definitions

The terms and definitions defined in GB/T 19278-2018 and the following terms and definitions apply to this document. 3.1 αcN The impact energy absorbed per unit area when a notched specimen fails.

4 Principles

The pendulum is raised to a fixed height and impacts the specimen supported as a horizontal beam with a single impact at a constant speed, with the impact line at the midpoint between the two supports. right For single-notch specimens, the impact position is directly opposite the back of the notch. For double-notched specimens, the impact position is directly opposite the notch. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18743.1-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18743.1-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18743.1-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18743.1-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 18743.1-2022?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18743.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.