GB/T 18477.2-2011 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18477.2-2011: Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and drainage -- Part 2: Ultra-Rib pipes
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 18477.2-2011	419	Add to Cart	3 days	Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and drainage -- Part 2: Ultra-Rib pipes	Valid

Similar standards

GB/T 19472.1   GB/T 19472.2   GB/T 21302   GB/T 45331   GB/T 45332   GB/T 18477.3   

Basic data

Standard ID: GB/T 18477.2-2011 (GB/T18477.2-2011)
Description (Translated English): Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and drainage -- Part 2: Ultra-Rib pipes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Classification of International Standard: 83.140.30
Word Count Estimation: 18,116
Date of Issue: 2011-12-30
Date of Implementation: 2012-07-01
Quoted Standard: GB/T 1033.1-2008; GB/T 2828.1-2003; GB/T 2918-1998; GB/T 8802-2001; GB/T 8806-2008; GB/T 9647-2003; GB/T 14152-2001; GB/T 18042-2000; GB/T 19278-2003; HG/T 3091-2000; ISO 13968-2008; GB/T 6111-2003
Regulation (derived from): Announcement of Newly Approved National Standards No. 22 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the order polyvinyl chloride resin (PVC) as the main raw material, extrusion applicable to public works, public buildings, outdoor, residential quarters of the underground sewerage, drainage, exhaust, communication cable threading buried polyvinyl chloride (PVC-U) reinforced pipes (hereinafter referred to as pipes) definitions, symbols, materials, products, classification and marking, pipe connection structure, requirements, test methods, inspection rules and signs, transportation and storage. This section applies to system working pressure is less than 0. 2 MPa, nominal size of not more than 300 mm low pressure water and sewage pipes. Taking into account the material chemical resistance and temperature resistance after also suitable for industrial use pipe drainage and sewerage works.

GB/T 18477.2-2011: Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and drainage -- Part 2: Ultra-Rib pipes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and draindge Part 2. Ultra-Rib pipes ICS 83.140.30 G33 National Standards of People's Republic of China Underground drainage Hard polyvinyl chloride (PVC-U) structure wall pipeline system Part 2. Reinforced Pipe Unplasticizedpolyvinylchloride (PVC-U) structurewalpipelinesystemfor Part 2. Ultra-Ribpipes Issued on. 2011-12-30 2012-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 18477 "buried drainage with a hard polyvinyl chloride (PVC-U) structure wall pipeline system" is divided into three parts. --- Part 1. double wall corrugated pipe; --- Part 2. Reinforced Pipe; --- Part 3. Axial hollow double-wall pipes. This section GB/T Part of 218,477. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This portion of the reference of ISO 21138-1.2007 "non-pressure underground drainage and sewerage - Thermoplastics piping systems for rigid polyvinyl chloride (PVC- U), polypropylene (PP) and polyethylene (PE) structured wall piping systems - Part 1. pipes, fittings and the system materials specifications and performance requirements. " And ISO 21138-3.2007 "non-pressure underground drainage and sewerage - Thermoplastics piping systems made of PVC (PVC-U), polypropylene (PP) And polyethylene (PE) structure wall pipeline systems - Part 3. Type B is not smooth outer pipes and fittings "in the wall structure on hard PVC Requirements pipe section. Please note that some of the content of this section may involve patents. This part of the release mechanism should not bear the responsibility to identify these patents. This part is proposed by the China National Light Industry Council. This part of the National Plastics Standardization Technical Committee of plastic pipe, fittings and valves at the Technical Committee (SAC/TC48 / SC3) centralized. This section drafted by. AD Plastic Industry Group Co., Ltd., Tianjin Star Army Pipe Manufacturing Co., Ltd., Foshan Gaoming Gu plastic Limited Secretary, Anhui high-tech management Technology Limited. The main drafters of this section. Huang Jian, Xiacheng Wen, Song Bo, Liu Yong. Underground drainage Hard polyvinyl chloride (PVC-U) structure wall pipeline system Part 2. Reinforced Pipe

1 Scope

GB/T 18477 provisions of this part of the polyvinyl chloride resin (PVC) as the main raw material, extrusion used in municipal engineering, Outdoor public buildings, residential quarters buried sewage, drainage, exhaust, communication cable threading with buried (PVC-U) reinforced with a hard PVC The definition of pipe (hereinafter referred to as tubes), symbols, material, product classification and marking, pipe connection structure, requirements, test methods, inspection Rules and signs, transportation and storage. This section applies to system operating pressure is less than 0.2MPa, nominal size of not more than 300mm of low pressure water and sewage pipes. Taking into account the material temperature resistance, chemical resistance and later, also for industrial engineering drainage and sewerage pipes.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. 1033.1-2008 non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. Press to accept the quality limit (AQL) retrieval batch test sample plan GB/T 2918-1998 plastic sample conditioning and testing of the standard environment GB/T 6111-2003 conveyance of fluids within the thermoplastic pipe pressure test method GB/T 8802-2001 Thermoplastics pipes, fittings Vicat softening temperature measured Determination of GB/T 8806-2008 Plastics piping systems for plastic parts size Determination of GB/T 9647-2003 thermoplastic pipe ring stiffness GB/T 14152-2001 thermoplastic pipe resistance to external impact performance test clock method GB/T 18042-2000 Test method for thermoplastic pipe creep ratio GB/T 19278-2003 Thermoplastics pipes, fittings and valves General terms and their definitions HG/T 3091-2000 rubber seals drainage and sewers with the interface ring material specification ISO 13968.2008 Plastics piping systems - Thermoplastics pipes - Determination of ring flexibility (Plasticspipingandductingsys- tems-Thermoplasticspipes-Determinationofringflexibility) 3 Terms, definitions and symbols GB/T 19278-2003 defined in the following terms, definitions and symbols apply to this section. 3.1 Terms and Definitions 3.1.1 Nominal size nominalsize, DN/ID And the inner diameter of the relevant nominal dimensions in millimeters (mm). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18477.2-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18477.2-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18477.2-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18477.2-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.