GB/T 18380.35-2022 English PDFUS$254.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18380.35-2022: Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C Status: Valid GB/T 18380.35: Historical versions
Basic dataStandard ID: GB/T 18380.35-2022 (GB/T18380.35-2022)Description (Translated English): Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K13 Word Count Estimation: 13,157 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 18380.35-2022: Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Tests on electric and optical fibre cables under fire conditions - Part 35.Test for vertical flame spread of vertically-mountedbunched wires or cables - Category C ICS 29.060.20 CCSK13 National Standards of People's Republic of China Replacing GB/T 18380.35-2008 Fire testing of electrical and optical cables under flame conditions Part 35.Vertically installed bundles of wires and cables Flame Vertical Spread Test Category C wireorcables-CategoryC, IDT) 2022-03-09 Released 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Test device 2 5 Test Step 2 6 Evaluation of test results 3 7 Performance Requirements 4 8 Recheck step 4 9 Test report 4 Appendix A (Normative) Guidelines for the Selection of Cables and Optical Cables for Type Approval Test 6 Appendix B (Informative) Recommended Performance Requirements 7 Reference 8 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 35 of GB/T 18380 "Burning test of cables and optical cables under flame conditions". GB/T 18380 has been issued The following parts are distributed. --- Part 11.Test device for vertical flame spread test of a single insulated wire and cable; --- Part 12.Test method for vertical flame spread of single insulated wire and cable 1kW premixed flame; --- Part 13.Test method for the vertical spread of flame of a single insulated wire and cable to determine burning drips (objects)/particles; --- Part 21.Test device for vertical flame spread of single insulated thin wire and cable; --- Part 22.Test method for vertical spread of flame of single insulated thin wire and cable - Diffusion type flame test method; --- Part 31.Test device for vertical flame spread of bundled wires and cables installed vertically; --- Part 32.Vertically installed bundled wire and cable flame vertical spread test AF/R; --- Part 33.Vertically installed bundled wire and cable flame vertical spread test Class A; --- Part 34.Vertically installed bundled wire and cable flame vertical spread test Class B; --- Part 35.Vertically installed bundled wire and cable flame vertical spread test Class C; --- Part 36.Vertical flame spread test of bundled wires and cables installed vertically Class D. This document replaces GB/T 18380.35-2008 "Cables and Optical Cables Fire Tests under Flame Conditions - Part 35.Vertical Installation "Class C flame vertical spread test for bundled wires and cables", compared with GB/T 18380.35-2008, except for structural adjustments and editorial changes In addition, the main technical changes are as follows. --- Changed the scope of application (see Chapter 1, Chapter 1 of the.2008 edition); --- In order to improve repeatability and reproducibility, the details of the installation of cable samples on steel ladders have been added (see 5.3, 5.3 of the.2008 edition); --- Deleted Appendix C. This document is equivalent to IEC 60332-3-24.2018 "Cable or Optical Cable Fire Test Part 3-24 under Flame Conditions. Vertical Installed bundled wire and cable flame vertical spread test Category C". The following minimal editorial changes have been made to this document. --- In order to harmonize with existing standards, the name of the standard is changed to "Fire Tests for Cables and Optical Cables under Flame Conditions - Part 35.Vertical Installed bundled wire and cable flame vertical spread test Category C". Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Standardization Technical Committee of Wires and Cables (SAC/TC213). This document is drafted by. Shanghai State Cable Inspection Co., Ltd., China Electric Power Research Institute, Jinbei Electric Co., Ltd., Jiangsu Shangshang Cable Group Co., Ltd., Jiangsu Hengtong Power Cable Co., Ltd., Zhongtian Technology Submarine Cable Co., Ltd., Far East Cable Co., Ltd., Qingdao Han Cable Co., Ltd., Baosheng Technology Innovation Co., Ltd., Yangzhou Shuguang Cable Co., Ltd., Shanghai Qifan Cable Co., Ltd. Co., Ltd., Shanghai Huapu Cable Co., Ltd., Ningbo Ball Crown Cable Co., Ltd., Shanghai Cable Research Institute Co., Ltd., Shanghai Pudong Electric Power Co., Ltd. Cable (Group) Co., Ltd., Sichuan Fire Research Institute of Emergency Management Department, Guangdong Cable Factory Co., Ltd., Jinlongyu Group Co., Ltd., Sunway Co., Ltd., Zhejiang Wanma Co., Ltd., Tianjin Futong Information Technology Co., Ltd., Fujian Nanping Sun Cable Co., Ltd. Co., Ltd., Xi'an Xidian Optical Cable Co., Ltd., Shenzhen Jinhuanyu Wire and Cable Co., Ltd., Shandong Hualing Cable Co., Ltd., Guangzhou Donghuanwei Wire and Cable Co., Ltd., Zhejiang Wanma Tianyi Communication Cable Co., Ltd., Shenzhen Shenxuan Technology Co., Ltd., Shanghai Moen Electric Co., Ltd. Gas Co., Ltd., Guangdong New Yaguang Cable Industry Co., Ltd., New Yat Cable Co., Ltd., Kunming Cable Group Kundian Cable Co., Ltd., Guangzhou Nanyang Cable Group Co., Ltd., Hangzhou Cable Co., Ltd., Wuxi Jiangnan Cable Co., Ltd., TBEA Shandong Luneng Taishan Cable Co., Ltd., CGN High-tech Nuclear Materials Group Co., Ltd., Zhejiang Chenguang Cable Co., Ltd., Shanghai Jinyou Jinhongzhi Neng Electric Co., Ltd., Jiangsu Dongfeng Cable Co., Ltd., Hunan Hualing Cable Co., Ltd., Weihai Honglin Power Technology Co., Ltd. Co., Ltd., Shenyang North Aike Cable Co., Ltd., Hainan Weite Electric Group Co., Ltd., Changfeng Cable Co., Ltd., Hebei Huatong Cable Group Co., Ltd., Jiangsu Yongding Co., Ltd., Hebei Xinbaofeng Wire and Cable Co., Ltd. The main drafters of this document. Liu Wei, Zhao Jiankang, Yang Wenfeng, Ling Guozhen, Guan Xinyuan, Hou Hongjian, Sheng Jinwei, Wang Hua, Fang Quansheng, Liang Guohua, Gao Zuohai, Ji Chuxi, Wen Shanghai, Xin Xiudong, Chen Wei, Hu Linming, Gao Weihong, Li Yunhuan, Shen Zhifei, Liu Huanxin, Zhang Long, Fan Defa, Wang Hui, Wang Laixiang, Huang Yanjiang, Zhang Qingyue, Nie Hongjun, Wu Laili, Hu Shaozhong, Zhang Zhimin, Zhu Wei, Fang Yuebin, Wang Zhihui, Teng Zhaofeng, Su Yongqi, Liu Shufang, Fei Churan, Yue Zhenguo, Lu Bangxiu, Zhao Yingrong, Zhang Gongzhuo, Jia Haifeng, Su Yinyu, Li Ju, Kong Deqing, Wang Huaian, Chen Xiaohong, Wu Jiansheng. The previous versions of this document and its superseded documents are as follows. ---First published in.2008 as GB/T 18380.35-2008; ---This is the first revision.IntroductionFlame retardant wire and cable or optical cable products are widely used in various construction projects. It is of great significance to reduce the occurrence of disasters and the spread of flames, reduce fire losses, and ensure the safe evacuation of all kinds of people. GB/T 18380 aims to establish The test method for the flame retardant performance of different flame retardant wire and cable or optical cable products under different installation and laying conditions is planned to be composed of 11 parts. --- Part 11.Test device for vertical spread of flame for a single insulated wire and cable. The purpose is to specify for single insulated electrical Test device for vertical flame spread test of wire and cable. --- Part 12.Single insulated wire and cable flame vertical spread test 1kW premixed flame test method. the purpose is Test method for determining the vertical flame spread of a single insulated wire or cable or fiber optic cable under 1 kW premixed flame conditions. --- Part 13.Test method for vertical flame spread of a single insulated wire and cable to determine burning drips (objects)/particles. The purpose is to determine the test for the determination of burning drips (objects)/particulates in the vertical flame spread test of a single insulated wire and cable method. --- Part 21.Test device for vertical flame spread test of a single insulated thin wire and cable. Intended to be specified for single insulation Test device for vertical flame spread test of thin wire and cable. --- Part 22.Vertical flame spread test method for single insulated thin wire and cable Diffusion-type flame test method. The purpose is to determine the total Insulated thin wires and cables with a cross-section less than 0.5mm2 and thin optical cables or conductors that may break under 1kW premixed flame conditions Test method for vertical spread of flame on thin wires that may fuse. --- Part 31.Vertically installed bundled wire and cable flame vertical spread test test device. The purpose is to provide for vertical Test device for vertical flame spread of straight-mounted bundled wires and cables, and installation arrangement and calibration. --- Part 32.Vertically installed bundled wire and cable flame vertical spread test AF/R category. The purpose is to determine the applicable Test method for the ability of special cables to be used in special installations to inhibit the spread of flame when installed in vertical bundles. --- Part 33.Vertical flame spread test of bundled wires and cables installed vertically Class A. The purpose is to determine the Test for the ability of wire, cable or optical cable products to inhibit the spread of flame when installed in vertical bundles in the case of metal material volume content method. --- Part 34.Vertical flame spread test of bundled wires and cables installed vertically Class B. The purpose is to determine the medium for rating Test on the ability of wire, cable or optical cable products to inhibit the spread of flame when installed in vertical bundles in the case of non-metallic material volume content method. --- Part 35.Vertical flame spread test of bundled wires and cables installed vertically Class C. The purpose is to determine the Test for the ability of wire, cable or optical cable products to inhibit the spread of flame when installed in vertical bundles in the case of metal material volume content method. --- Part 36.Vertical flame spread test of bundled wires and cables installed vertically Class D. The purpose is to determine the very low Test method for the ability of small cable products to inhibit the spread of flame when installed in vertical bundles in the case of non-metallic material volume content. Fire testing of electrical and optical cables under flame conditions Part 35.Vertically installed bundles of wires and cables Flame Vertical Spread Test Category C1 ScopeThis document describes the Class C test method for evaluating the suppression of flame sag under specified conditions of vertically installed bundled wire, cable or fiber optic cables. The ability to spread straight. This document applies to the cable and optical cable sample sections installed on the test steel ladder containing a nominal total volume of 1.5L/m of non-metallic materials. The fire time is 20min. Cables and optical cables are installed in front of the steel ladder, and category C is used to evaluate the occasions with low volume content of non-metallic materials. This test is used for type approval test. See Appendix A for the selection requirements for test cables and optical cables. Flame spread through cable and fiber optic test The damage range of the sample is determined. This test procedure can be used to verify the ability of electrical and fiber optic cables to suppress the spread of flames. Recommended performance requirements are given in Appendix B. Note. The term "wire and cable" in this document includes all metal conductor insulated cables used for power or signal transmission.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. IEC 60332-3-10 Fire tests for electrical and optical cables under flame conditions - Part 3-10.Vertically installed bundled wires and cables Note. GB/T 18380.31-2022 Fire test of cables and optical cables under flame conditions - Part 31.Vertically installed bundled wire and cable flame Straight propagation test test device (IEC 60332-3-10.2018, IDT) IEC 60811-606 Electrical and optical cables - Test methods for non-metallic materials - Part 606.Methods of measuring density for physical and chemical tests3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 ignition source ignitionsource A source of energy that initiates combustion. [Source. ISO 13943.2017, 3.219] 3.2 charcoal Carbon residues from pyrolysis or incomplete combustion. [Source. ISO 13943.2017, 3.47] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18380.35-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 18380.35-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18380.35-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18380.35-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18380.35-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18380.35-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
