GB/T 12706.4-2020 PDF EnglishUS$365.00 · In stock · Download in 9 seconds
GB/T 12706.4-2020: Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um=7.2 kV) up to 35 kV (Um=40.5 kV) Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 12706.4: Historical versions
Similar standardsGB/T 12706.4-2020: Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um=7.2 kV) up to 35 kV (Um=40.5 kV)---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT12706.4-2020 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 29.060.20 K 13 Replacing GB/T 12706.4-2008 Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1kV (Um = 1.2kV) up to 35kV (Um = 40.5kV) – Part 4.Test Requirements on Accessories for Cables with Rated Voltages from 6kV (Um = 7.2kV) up to 35kV (Um = 40.5kV) [IEC 60502-4.2010, Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1kV (Um = 1.2kV) up to 30kV (Um = 36kV) – Part 4.Test Requirements on Accessories for Cables with Rated Voltages from 6kV (Um = 7.2kV) up to 30kV (Um = 36kV), MOD] Issued on. MARCH 31, 2020 Implemented on. OCTOBER 1, 2020 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 6 2 Normative References... 6 3 Terms and Definitions... 7 4 Type of Accessory... 9 5 Voltage Designations and Maximum Conductor Temperatures... 9 6 Assembly of Accessories to be Tested... 9 7 Range of Approval... 11 8 Test Sequences... 12 9 Test Results... 13 Annex A (Informative) Identification of Test Cable... 32 Bibliography... 33ForewordGB/T 12706 Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1kV (Um = 1.2kV) up to 35kV (Um = 40.5kV) consists of the following 4 parts. --- Part 1.Cables for Rated Voltage of 1kV (Um = 1.2kV) and 3kV (Um = 3.6kV); --- Part 2.Cables for Rated Voltage of 6kV (Um = 7.2kV) and 30kV (Um = 36kV); --- Part 3.Cables for Rated Voltage of 35kV (Um = 40.5kV); --- Part 4.Test Requirements on Accessories for Cables with Rated Voltages from 6kV (Um = 7.2kV) up to 35kV (Um =40.5kV). This Part is Part 4 of GB/T 12706. This Part replaced GB/T 12706.4-2008 Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 6kV (Um = 7.2kV) [Translator Note. here it should be 1kV (Um = 1.2kV)] up to 35kV (Um = 40.5kV) – Part 4.Test Requirements on Accessories for Cables with Rated Voltages from 6kV (Um = 7.2kV) up to 35kV (Um =40.5kV). Compared with GB/T 12706.4-2008, this Part made the following major technical changes besides the editorial modifications. --- Added description and test requirements for internally tapered plug-in type separatable connectors (see 3.11 and Clause 8 of this Edition); --- Add the labeling of applicable standards for connecting hardware (see 6.1.2 of this Edition); --- Add the labeling of terminal box contents (see 6.1.3 of this Edition); --- Add the content of the conductor cross-section coverage of separatable connectors in the approved scope (see Clause 7 of this Edition); --- Add outdoor terminal immersion test (see Table 2 of this Edition); --- Modify the axial force data of the operating ring test in the test procedure for screened dead-break connectors (see Table 5 of this Edition; Table 7 of the 2008 Edition); --- Add the constant voltage load cycle test in air for additional tests of minimum and maximum conductor cross-sections (see Table 9 of this Edition); --- Modify the number of constant voltage load cycles in the additional tests for approval of different types of cable insulation shields and from round conductors to formed conductors (see Table 10 of this Edition; Table 11 of the 2008 Edition); --- Add moisture test for unscreened dead-break connectors (see Table 13 of this Edition). This Part used redrafting method to modify and adopt IEC 60502-4.2010 Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1kV (Um = 1.2kV) up to 30kV (Um = 36kV) – Part 4.Test Requirements on Accessories for Cables with Rated Voltages from 6kV (Um = 7.2kV) up to 30kV (Um = 36kV). Compared with IEC 60502-4.2010, this Part mainly made the structural changes as follows. --- According to the requirements of GB/T 1.1-2009, the tables are numbered in the order in which they are mentioned. Starting from Table 2, the correspondence between the tables in this Part and the IEC 60502-4.2010 tables is that Table 2 corresponds to Table 5; Table 3 corresponds Table 6; Table 4 correspond to Table 7; Table 5 corresponds to Table 8; Table 6 corresponds to Table 9; Table 7 corresponds to Table 10; Table 8 corresponds to Table 2; Table 9 corresponds to Table 11; Table 10 corresponds to Table 12, and Table 11 corresponds to Table 3; Table 12 corresponds to Table 4; Table 13 corresponds to Table 13; and Table 14 corresponds to Table 14; --- Add Subclause 7.9. Compared with IEC 60502-4.2010, the major technical differences and their causes between this Part and IEC 60502-2.2010 are as follows. --- Regarding normative references, this Part has been adjusted with technical differences to adapt to China's technical conditions. The adjustments are reflected in Clause 2 "Normative References". The specific adjustments are as follows. ● Add reference to GB/T 2900.10 (see Clause 3); ● Replace IEC 60502-2.2005 with GB/T 12706.2, which is modified to adopt international standards (see Clause 1, Clause 5 and 6.1.1); ● Add reference to GB/T 12706.3 (see Clause 1, 5.1, 5.2 and 6.1.1); ● Replace IEC 61442.2005 with GB/T 18889-2002, which is modified to adopt international standards (see Tables 1 ~ 10 and Table 12); ● Replace IEC 60183 with JB/T 8996, which has a non-equivalent degree of consistency with international standards (see 5.1); ● Delete IEC 61238-1. --- In order to adapt to China's technical requirements, add the 35kV voltage level (see Clause 1); --- In order to adapt to China's technical requirements, add the description and test requirements for internally tapered plug-in type separable connectors (see 3.11 and Clause 8); --- Delete the term "wide range attachment terms" (see Clause 3); --- In order to adapt to China's technical requirements, add the description and test requirements for internally tapered plug-in type separable connectors (see 3.11 and Clause 8); --- In order to adapt to China's technical requirements, add the description of "6/6kV, 8.7/10kV, 21/35kV, 26/35kV" (see Table 14). This Part also made the following editorial modifications. --- In order to adapt to China’s technical standard system, change the standard name into Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 6kV (Um = 7.2kV) up to 35kV (Um = 40.5kV) – Part 4.Test Requirements on Accessories for Cables with Rated Voltages from 6kV (Um = 7.2kV) up to 35kV (Um = 40.5kV). --- Add the Bibliography; list the non-normative reference GB/T 9327 into the Bibliography. This Part was proposed by China Electrical Equipment Industry Association. This Part shall be under the jurisdiction of National Technical Committee on Wire and Cables of Standardization Administration of China (SAC/TC 213). Drafting organizations of this Part. Shanghai Electric Cable Research Institute Co., Ltd.; Shanghai National Center of Testing and Inspection for Electric Cable and Wire Co., Ltd.; China Electric Power Research Institute Co., Ltd.; Shanghai Sanyuan Cable Accessories Co., Ltd.; Long Cable Technology Group Co., Ltd.; 3M China Limited; Changyuan Electric Technology Co., Ltd.; Shanghai Yongjin Electric Technology Co., Ltd.; Jiangsu Zhongtian Technology Cable Accessories Co., Ltd.; Jiangsu Yucheng YEGE Electric Equipment Co., Ltd.; and ABB (Beijing) Hight Voltage Switchgear Co., Ltd. Chief drafting staffs of this Part. Xia Junfeng, Xu Xiaofeng, Li Chuang, Yan Mengkun, Xu Cao, Guo Changchun, Zhuang Meng, Wang Jinming, Du Chenglong, Tian Zhengbing, Tang Zhihui, Fu Yazhou, Zhang Rong, Zhang Dapeng, Xiao Jingcheng, and Du Qing. The historical editions replaced by this Part are as follows. --- GB/T 12706.4-2002, GB/T 12706.4-2008. Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1kV (Um = 1.2kV) up to 35kV (Um = 40.5kV) – Part 4.Test Requirements on Accessories for Cables with Rated Voltages from 6kV (Um = 7.2kV) up to 35kV (Um = 40.5kV)1 ScopeThis part of GB/T 12706 specifies the requirements for type test of accessories for extruded insulated power cables with rated voltages from 3.6/6kV (7.2kV) to 26/35kV (40.5kV) and meet the requirements of GB/T 12706.2 or GB/T 12706.3.2 Normative ReferencesThe following documents are essential to the application of this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document.3 Terms and DefinitionsFor the purposes of this Document, the terms and definitions given in GB/T 2900.10 and the following apply. Accessory making a connection between two cables to form a continuous circuit.4 Type of AccessoryThe accessories covered by this Part are listed below.5 Voltage Designations and Maximum Conductor TemperaturesThe accessories shall be applicable to the maximum conductor temperature during normal operation of the cable and the maximum conductor temperature during short circuit specified in GB/T 12706.2 and GB/T 12706.3.6 Assembly of Accessories to be TestedWhere terminations or separable connectors are to be tested, the connection between either lugs or bushings shall have the same electrical cross-sectional area as that of the cable conductor.7 Range of ApprovalFor separable connectors, compliance for one type of accessory for the range of cable conductor cross-sections given in Table 1 shall be obtained by successfully completing all the appropriate tests of Table 5 to 7 on the cross-section specified in Table 8.8 Test SequencesTests applicable to various accessories shall be carried out in accordance with the corresponding program tables and diagrams listed in Table 12. The test procedures and requirements for unscreened bolted-type separable connectors can be carried out in accordance with Table 6 (except plug-in and pull-out test).9 Test ResultsIf an accessory fails to meet the requirements due to either installation or test procedure errors, the test shall be declared void without discrediting the accessories. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 12706.4-2020 be delivered?Answer: The full copy PDF of English version of GB/T 12706.4-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 12706.4-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12706.4-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 12706.4-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 12706.4-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12706.4-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 12706.4-2020?A step-by-step guide to download PDF of GB/T 12706.4-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 12706.4-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
