GB/T 18001-2015 English PDFUS$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18001-2015: Oleoresin from Pinus elliottii Engelm Status: Valid GB/T 18001: Historical versions
Basic dataStandard ID: GB/T 18001-2015 (GB/T18001-2015)Description (Translated English): Oleoresin from Pinus elliottii Engelm Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B72 Classification of International Standard: 65.020 Word Count Estimation: 7,777 Date of Issue: 2015-07-03 Date of Implementation: 2015-11-02 Older Standard (superseded by this standard): GB/T 18001-1999 Quoted Standard: GB/T 12901; LY/T 1355-2010 Regulation (derived from): National Standard Announcement 2015 No.22 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard defines the quality requirements of the rosin, test methods, inspection rules and packaging, transport and storage. This Standard applies to the slash pine stumpage tapping pine resin obtained. GB/T 18001-2015: Oleoresin from Pinus elliottii Engelm---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Oleoresin from Pinus elliottii Engelm ICS 65.020 B72 National Standards of People's Republic of China Replacing GB/T 18001-1999 OLEORESIN OleoresinfromPinuselliotti Engelm Issued on. 2015-07-03 2015-11-02 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 18001-1999 "OLEORESIN." The standards and GB/T 18001-1999 compared to the following main changes. --- The range must be specified in detail; --- Remove substandard level of quality requirements; --- Modify the provisions of the quality indicators in appearance; --- Modify the moisture content and water content and additives were special requirements; --- Test method The first method to directly reference LY/T 1355-2010; --- In the body of the figure for the name of the measuring device will be marked; --- Increase the result of the determination method; --- Increased inspection rules, packaging, labeling, transportation and storage requirements. This standard is proposed and managed by the State Forestry Administration. This standard by the Chinese Academy of Forestry Forest Research Institute of Chemical Industry, Jiangxi is still flying Forest Products Ltd. is responsible for drafting. The main drafters of this standard. Gao Hong, Zheng Wensheng, business Shibin, Guo-Ping Wu, Rao Xiaoping. This standard replaces the standards previously issued as follows. --- GB/T 18001-1999. OLEORESIN1 ScopeThis standard defines the quality requirements of the rosin, test methods, inspection rules and packaging, transport and storage. This standard applies to the slash pine stumpage tapping pine resin obtained.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12901 Turpentine LY/T 1355-2010 turpentine3 Requirements3.1 Quality requirements Quality indicators at all levels of the rosin should meet the requirements of Table 1. Table 1 OLEORESIN quality indicators A two premium projects Exterior Fresh white or slightly yellow semifluid No massive yellow pine White semifluid No massive yellow pine Turpentine content /% ≥24 ≥20 ≥17 Mechanical impurities a /% ≤3 ≤5 a maximum length or diameter no larger than 10mm. 3.2 Special Requirements 3.2.1 Water content A water content of more than 4% deducted from the total amount of turpentine. 3.2.2 Additives One for additives. Test Method 4 Two tests prescribed method, the first method is difficult, you can use the second method. Disagrees with the results of such tests should be based on the first ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18001-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 18001-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18001-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18001-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18001-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18001-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
