GB/T 17889.2-2021 English PDFUS$879.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17889.2-2021: Ladders - Part 2: Requirements, test, marking Status: Valid GB/T 17889.2: Historical versions
Basic dataStandard ID: GB/T 17889.2-2021 (GB/T17889.2-2021)Description (Translated English): Ladders - Part 2: Requirements, test, marking Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J09 Word Count Estimation: 46,497 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 17889.2-2021: Ladders - Part 2: Requirements, test, marking---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Ladders -- Part 2: Requirements, test, marking ICS 13:110 CCSJ09 National Standards of People's Republic of China Replacing GB/T 17889:2-2012 Ladders part 2: requirements, tests and marking Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Requirements 2 4:1 General requirements 2 4:2 Materials 2 4:3 Design 2 4:4 Surface treatment 3 4:5 Hinge (rotation point) 3 4:6 Opening Limit 3 4:7 Running sticks/pedals/platforms 3 4:8 Ladder foot 3 4:9 Extension Ladder and Section Ladder 3 5 Experiment 4 5:1 General provisions 4 5:2 Strength test 4 5:3 Ladder frame bending test 8 5:4 Lateral deflection test of ladders 9 5:5 Bottom end test of ladder frame 10 5:6 Vertical load test of rungs, pedals and platforms 11 5:7 Torsional test of running bars and pedals 12 5:8 Opening limits and hinge tests for free-standing ladders 13 5:9 Locking device test 15 5:10 Platform tilt test of self-supporting ladder 15 5:11 Ladder foot pull-out test 16 5:12 Handrail test 18 5:13 Maximum extension of the ladder 20 5:14 A state three-piece combination ladder test 20 5:15 Torsional test for free-standing ladders 21 5:16 Test Methods for Plastic Ladders 23 5:17 Durability test of free-standing ladders 25 5:18 Bottom slip test of leaning ladder 31 5:19 Strength test of side balance bar 33 5:20 Strength test of strut-type balance bars 34 5:21 Reclining ladder torsion test 35 6 Signs and Instructions for Use 37 Appendix A (normative) test sequence 38 Reference 40 forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 2 of GB/T 17889 "Ladders": GB/T 17889 has released the following parts: --- Part 1: Terms, types and functional dimensions; --- Part 2: Requirements, tests and markings; --- Part 3: Instructions for use; --- Part 4: Ladders with single or multiple hinges; --- Part 5: Telescopic ladders; --- Part 6: Movable platform ladder: This document replaces GB/T 17889:2-2012 "Ladders - Part 2: Requirements, Tests and Marking", this document and GB/T 17889:2- Compared with:2012, except for structural adjustment and editorial changes, the main technical changes are as follows: --- Deleted all wood-related content (see:2012 edition 4:2:4, the third paragraph of 4:4, the third paragraph of 4:7, Figure 7~Figure 9, 4:8 the second paragraph); --- Changed the scope (see Chapter 1, Chapter 1 of the:2012 edition); --- Added the terms and definitions of "professional ladders" and "household ladders" (see 3:5, 3:6), and modified the terms of "composite materials" and "thermoplastic materials": Terms and definitions (see 3:2, 3:3, 3:2, 3:3 of the:2012 edition); --- Changed the general requirements (see 4:1, 4:1 of the:2012 edition); --- Changed the material requirements (see 4:2, 4:2 of the:2012 edition); --- Changed the design requirements (see 4:3, 4:3 of the:2012 edition); --- Changed the requirements for ladder feet (see 4:8, 4:9 of the:2012 edition); --- Changed the requirements for extension ladders and sectional ladders (see 4:9, 4:10 of the:2012 edition); --- Changed the strength test requirements (see 5:2, 5:2 of the:2012 edition); --- Added the description of the measurement benchmark for the bending test of the ladder frame (see the sixth paragraph of 5:3); --- Changed the test plan for the ladder with a balance bar in the bottom end test of the ladder frame (see 5:5, 5:5 of the:2012 edition); --- Increased the torsion test of self-supporting ladders (see 5:15); --- Changed the test method for plastic ladders and deleted the insulation test (see 5:16, 5:16 of the:2012 edition); --- Increased the durability test of free-standing ladders (see 5:17); --- Added the slip test at the bottom of the leaning ladder (see 5:18); --- Increased the strength test of the leaning ladder with side balance bar (see 5:19); --- Increased the strength test of the leaning ladder of the strut-type balance bar (see 5:20); --- Changed the torsion test in the length direction of the ladder (see 5:21, 5:15 of the:2012 edition); --- Added judgment criteria (see 5:2~5:21); --- Delete the certification requirements (see Chapter 7 of the:2012 edition); --- Changed Appendix A (see Appendix A, Appendix A of the:2012 edition): Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed and managed by the National Machinery Safety Standardization Technical Committee (SAC/TC208): This document is drafted by: Foshan Shunde Wanyi Household Products Co:, Ltd:, Tianjin Jinan Household Products Co:, Ltd:, Suzhou Feihua Aluminum Industry Co:, Ltd:, Shanghai Ruiju Metal Products Co:, Ltd:, Xiamen Guomu Agricultural Technology Co:, Ltd:, Suzhou Zhongchuang Aluminum Co:, Ltd:, Zhejiang Aopeng Industry and Trade Co:, Ltd:, Yongkang Weige Industry and Trade Co:, Ltd:, Ningbo Xingfu Tools Co:, Ltd:, Zhejiang Gaomai Industry and Trade Co:, Ltd: Company, Ningbo Xinyiyuan Aluminum Co:, Ltd:, Shenyang Yongpan Metal Products Co:, Ltd:, Nanjing Forestry University, China Machinery Productivity Promotion Center, Shaanxi Xiguo Hongfu Testing Technology Co:, Ltd:, Guangdong Yisheng Testing Co:, Ltd:, Quanzhou Standardization Association, Yiwu Laojin Mould Co:, Ltd:, Jiang Sumicida Technology Co:, Ltd:, Shanghai Jianhu Instrument Equipment Co:, Ltd: The main drafters of this document: Yan Junjun, Li Jie, Zhang Xiuzhuo, Cai Baorong, Que Caiwang, Zhou Xiaoying, Chen Zhijun, Xu Fengge, Tao Junfu, Zhou Pan, Chen Jingjing, Chen Mingzhen, Ju Ronghua, Fu Huiqing, Xie Changhua, Li Zhong, Liang Runxi, Wang Shengjiang, Lin Hongsong, Bao Minghua, Li Qin, Zhu Bin, Cai Qiang, Chen Jiaxing, Zhang Qun, Li Chunping, Ni Liaoyong, Duan Yanjun, Li Jiatao, Liu Zhiyong, Chen Miaoren, Zhao Linxiang, Yang Yi, Xiong Yuping, Shen Dehong, Xu Haozhi, Cheng Hongbing, Feng Shenghui, Dong Kaibo, Song Xiaoning, Jin Qinghe, He Mingli, Zhang Xiaofei: This document was first published as GB/T 17889:2-1999 in:1999, the first revision was in:2012, and this is the second revision:IntroductionLadder is a commonly used climbing safety device: GB/T 17889 aims to improve the quality and safety level of ladder-related products, guarantee User safety consists of six parts: --- Part 1: Terms, types and functional dimensions: Give the common terms and types of ladders, as well as those that need to be used in design and testing Functional dimensions that affect the quality and safety level of ladders and are designed to harmonize ladder-related standards: --- Part 2: Requirements, tests and signs: Specify requirements for factors affecting the quality and safety level of ladders, and give corresponding test methods: Law, designed to ensure the safety level of the ladder: --- Part 3: Instructions for use: The instructions for the use of ladders need to give information and specify requirements for the way of expression, in order to ensure the use of The person can use the ladder correctly according to the instruction manual: --- Part 4: Ladders with single or multiple hinges: Special requirements are specified for hinged ladders to ensure the quality and safety of hinged ladders level: --- Part 5: Telescopic ladders: Special requirements are specified for telescopic ladders to ensure the quality and safety level of telescopic ladders: --- Part 6: Movable platform ladder: Special requirements are specified for movable platform ladders to ensure the quality of movable platform ladders: quantity safety level: Ladders part 2: requirements, tests and marking1 ScopeThis document specifies general design features, requirements and test methods for portable and mobile ladders: This document applies to portable and mobile ladders: This document does not apply to special purpose ladders, such as: fixed ladders, fire ladders, insulated ladders: Note: This document is used in conjunction with GB/T 17889:1:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 228:1 Tensile Test of Metallic Materials Part 1: Test Method at Room Temperature GB/T 1040:1 Determination of Tensile Properties of Plastics Part 1: General GB/T 1040:2 Determination of Tensile Properties of Plastics Part 2: Test Conditions for Molded and Extruded Plastics GB/T 1043:1 Determination of impact properties of plastic simply supported beams - Part 1: Non-instrumented impact test GB/T 3854 Test method for Barcol hardness of reinforced plastics GB/T 12467:1 Quality requirements for fusion welding of metallic materials Part 1: Selection criteria for corresponding grades of quality requirements GB/T 12467:2 Quality requirements for fusion welding of metallic materials Part 2: Complete quality requirements GB/T 12467:3 Quality requirements for fusion welding of metallic materials Part 3: General quality requirements GB/T 12467:4 Quality requirements for fusion welding of metallic materials Part 4: Basic quality requirements GB/T 16422:2-2014 Plastics Laboratory Light Source Exposure Test Method Part 2: Xenon Arc Lamp GB/T 17889:1-2021 Ladder Part 1: Terms, Types and Functional Dimensions GB/T 17889:3 Ladder Part 3: Instruction Manual GB/T 19419 Welding Management Tasks and Responsibilities ISO 14125 Determination of flexural properties of fiber-reinforced plastic composites (Fibre-reinforcedplasticcomposites- Determinationofflexuralproperties)3 Terms and DefinitionsThe terms and definitions defined in GB/T 17889:1-2021 and the following apply to this document: 3:1 thermosetplastic Plastics that have been cured into a substantially insoluble, infusible state by heating or other methods, such as radiation, catalysis, etc: [Source: GB/T 2035-2008, 2:1062] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17889.2-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 17889.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17889.2-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17889.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17889.2-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17889.2-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
