GB/T 17421.10-2021 English PDFUS$794.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17421.10-2021: Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools Status: Valid
Basic dataStandard ID: GB/T 17421.10-2021 (GB/T17421.10-2021)Description (Translated English): Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J50 Word Count Estimation: 42,479 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 17421.10-2021: Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test code for machine tools - Part 10.Determination of the measuring performance of probing systems of numerically controlled machine tools ICS 25.040.20 J50 National Standards of People's Republic of China General Rules for Inspection of Machine Tools Part 10.CNC Machine Tools Measurement of the measurement performance of the detection system (ISO 230-10.2016, IDT) Released on 2021-03-09 2021-10-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee Table of contentsForeword Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 3.1 General terms 2 3.2 Terms related to detection systems 2 3.3 Terms related to detection 5 3.4 Terms related to scanning probes (see Appendix B) 6 4 General requirements 7 4.1 Impact on the measurement performance of the detection system 7 4.2 Unit of measurement 7 4.3 Implementation of ISO 230-1 7 4.4 Inspection tools 8 4.5 Prerequisites for testing machine tools 8 4.6 Inspection sequence 8 4.7 Inspection items 8 4.8 Detection of uncertainty factors 8 4.9 Test result report 8 5 Thermal influence 9 5.1 General 9 5.2 Environmental temperature change error (ETVE) detection 9 5.3 Other thermal deformation testing 9 6 Workpiece detection 9 6.1 General 9 6.2 Repeatability of detection 10 6.3 Probe contact drift detection, A 11 6.4 Detection tool positioning repeatability detection, RPTL, X, RPTL, Y and RPTL, Z (RProbing-Tool_Location, X, Y, Z) 12 6.5 2D detection error detection, PFTU, 2D (PForm_Tactile_Unique, 2D) 12 6.6 3D detection error detection, PFTU, 3D (PForm_Tactile_Unique, 3D) 13 6.7 Workpiece positioning and orientation detection, EPLA, Z, ELIN, Y, ECOR, X, ECOR, Y and ECOR, Z, (EPLAne, Z), (ELINe,Y), (ECORnercoordinates,X,Y,Z) 15 6.8 Combined workpiece processing and positioning detection, ECML, X, ECML, Y, ECML, Z, RCML, X, RCML, Y and RCML, Z (ECombinedMachiningandLocation,X,Y,Z), (RCombinedMachiningandLocation,X,Y,Z) 19 6.9 Time delay change detection 20 6.10 External dimension measurement performance test 24 7 Tool detection 25 7.1 General 25 7.2 Calibration of tool setting system 26 7.3 Tool setting repeatability 26 Appendix A (informative appendix) Explanation of applied symbols 29 Appendix B (informative appendix) Scanning probe measurement performance 31 Reference 37ForewordGB/T 17421 "General Rules for Machine Tool Inspection" is divided into the following 11 parts. ---Part 1.The geometric accuracy of the machine tool under no load or finishing conditions; ---Part 2.Determination of the positioning accuracy and repeat positioning accuracy of the CNC axis; ---Part 3.Determination of thermal effects; ---Part 4.Circle inspection of CNC machine tools; ---Part 5.Determination of noise emission; ---Part 6.Determination of the accuracy of the position of the body and the diagonal line (diagonal displacement inspection); ---Part 7.Geometric accuracy of the axis of rotation; ---Part 8.Vibration (technical report); ---Part 9.Basic equations (technical reports) for the uncertainty estimation of ISO 230 machine tool inspection series standards; ---Part 10.Determination of the measurement performance of the CNC machine tool detection system; ---Part 11.Measuring Instruments for Inspection of Geometric Accuracy of Machine Tools (Technical Report). This part is part 10 of GB/T 17421. This section was drafted in accordance with the rules given in GB/T 1.1-2009. The translation method used in this part is equivalent to the ISO 230-10.2016 General Rules for Inspection of Machine Tools Part 10.Measurement of CNC Machine Tool Detection System Determination of performance. The Chinese documents that have consistent correspondence with the normatively cited international documents in this section are as follows. ---GB/T 17421.1-1998 General rules for inspection of machine tools Part 1.Geometric accuracy of machine tools under no load or finishing conditions (eqvISO 230-1.1996) ---GB/T 17421.2-2016 General Rules for Inspection of Machine Tools Part 2.Confirmation of the positioning accuracy and repeatability of the CNC axis Fixed (ISO 230-2.2006, IDT) ---GB/T 17421.3-2009 General Rules for Inspection of Machine Tools Part 3.Determination of Thermal Effects (ISO 230-3.2001, IDT) This part was proposed by China Machinery Industry Federation. This part is under the jurisdiction of the National Standardization Technical Committee for Metal Cutting Machine Tools (SAC/TC22). Drafting organizations of this section. Shenyang Machine Tool (Group) Co., Ltd., National Machine Tool Quality Supervision and Inspection Center, Shenji Group Kunming Machine Tool Co., Ltd., Beijing University of Technology. The main drafters of this section. Li Jun, Zhang Wei, Chen Yanyan, Cao Wenzhi, He Chunshu, Huang Zuguang, Liu Zhifeng, Li Shulin.IntroductionGB/T 17421 (all parts) is a standardized method used to determine the accuracy of machine tools, excluding portable power tools. This section involves the detection steps of the measurement performance evaluation of the contact detection system (discrete point detection mode) integrated with the CNC machine tool. Detect The steps are not to distinguish the various causes of errors, but to illustrate the integration of the environment, machine tools, detection systems, and detection software in terms of measurement performance influences. The results of these tests cannot reflect the performance of the machine tool in the state of metal cutting. When testing is used for acceptance purposes, in the manufacturer/supplier With the consent of the supplier, the user makes a choice, and the detection of the performance of the machine tool detection system is more worthy of attention. The results of these tests also do not reflect the performance of the machine tool when it is used in a coordinate measuring machine (CMM). These properties involve tracking capabilities For questions, the corresponding assessment is based on GB/T 16857.2 and GB/T 16857.5. Refer to Appendix A for a description of the symbols used in this section. Refer to Appendix B for the inspection process of scanning probe measurement performance. General Rules for Inspection of Machine Tools Part 10.CNC Machine Tools Measurement of the measurement performance of the detection system1 ScopeThis part of GB/T 17421 specifies the measurability of a contact detection system (discrete point detection mode) assembled with a CNC machine tool. Test procedures that can be evaluated. This section does not contain other types of detection systems, such as those used in scanning mode or non-contact detection systems. For coordinate measuring machine The performance evaluation of the machine tool is also not within the scope of this section. These performances involve the problem of tracking ability and are obviously affected by the geometric accuracy of the machine tool. The detection of machine tool detection system specified in this section can also be determined in accordance with GB/T 16857.2 and GB/T 16857.5. The contact detection system of CNC machine tools is used in the processing process as follows. ---Check whether the workpiece is installed correctly before processing; --- Positioning and/or calibration of the workpiece; ---After processing, the workpiece is still being measured on the machine tool; ---Positioning and orientation measurement of machine tool rotation axis; ---Setting and measurement of cutting tools (tool radius, length and offset); ---Determination of tool wear. Note 1.This section is mainly for machining centers, for other types of machine tools, such as turning and grinding centers, will be involved in later versions of this section. Note 2.This section does not involve non-contact measurement (for example. optical probe), but it will be involved in later versions of this section.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 16857.5-2017 Geometric Technical Specification for Products (GPS) Acceptance Test and Re-inspection Test of Coordinate Measuring Machine Part 5 Sub. Coordinate measuring machine (ISO 10360-5.2010, IDT) using single-probe or multi-probe contact detection system ISO 230-1 General rules for inspection of machine tools Part 1.Geometric accuracy of machine tools under no load or finishing conditions (Testcodeforma- chinetools-Part 1.Geometricaccuracyofmachinesoperatingunderno-loadorquasi-staticconditions) ISO 230-2 General Rules for Inspection of Machine Tools Part 2.Determination of Positioning Accuracy and Repeatable Positioning Accuracy of CNC Axis (Testcodefor machinetools-Part 2.Determinationofaccuracyandrepeatabilityofpositioningofnumericalycon- troledaxes) ISO 230-3.2007 General Rules for Inspection of Machine Tools Part 3.Determination of Thermal Effects (Testcodeformachinetools-Part 3. Determinationofthermaleffects)3 Terms and definitionsThe following terms and definitions apply to this document. Note. In the measurement mode, the machine tool is similar to a coordinate measuring machine. Therefore, the definition used for the test performance of the coordinate measuring machine measurement system can also be used for machine tools. Of course However, not all machine tool users are familiar with the use of coordinate measuring machines. The definitions provided in this section are mainly for machine tools to ensure that they are not related to coordinate measurement. Any confusion arises from the definition of the measuring machine. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17421.10-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 17421.10-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17421.10-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17421.10-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
