GB/T 15120.2-2012 English PDFUS$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15120.2-2012: Identification cards -- Recording technique -- Part 2: Magnetic stripe -- Low coercivity Status: Valid GB/T 15120.2: Historical versions
Basic dataStandard ID: GB/T 15120.2-2012 (GB/T15120.2-2012)Description (Translated English): Identification cards -- Recording technique -- Part 2: Magnetic stripe -- Low coercivity Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L64 Classification of International Standard: 35.240.15 Word Count Estimation: 22,298 Older Standard (superseded by this standard): GB/T 15120.2-1994; GB/T 15120.5-1994; GB/T 15120.4-1994 Quoted Standard: GB/T 3505; GB/T 14916; GB/T 17554.1; ISO/IEC 10373-2 Adopted Standard: ISOIEC 7811-2-2001, MOD Regulation (derived from): National Standards Bulletin No. 41 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the identification card on the low coercivity magnetic stripe (including any protective coating) features, coding techniques, coding tracks the location and character sets. According to human, machine minimum requirements of both f GB/T 15120.2-2012: Identification cards -- Recording technique -- Part 2: Magnetic stripe -- Low coercivity---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Identification cards Recording technique Part 2.. Magnetic stripe Low coercivity ICS 35.240.15 L64 National Standards of People's Republic of China Replacing GB/T 15120.2-1994, GB/T 15120.4-1994, GB/T 15120.5-1994 Identification cards - Recording technique Part 2. low coercivity magnetic stripe Part 2. Magneticstripe-Lowcoercivity (ISO /IEC 7811-2.2001, MOD) Issued on. 2012-12-31 2013-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Compliance 1 3 Normative references 1 4 Terms and definitions Physical characteristics of identification cards 3 5 5.1 3 magnetic stripe area warpage 5.2 surface deformation 3 Physical properties of the magnetic stripe 4 6 Height and surface profile of the magnetic stripe region 4 6.1 6.2 surface roughness 6 6.3 magnetic stripe card and adhesive 6 6.4 read/write heads for magnetic stripe wear 6 6.5 Chemical resistance 6 The performance characteristics of the magnetic material 6 7 7.1 General 6 7.2 Testing and operating environment 6 7.3 pairs of signal amplitude magnetic media requirements 7 8 encoding technology 8 9 9 General Coding Standards 9.1 Record angle 9 9.2 The nominal bit density 10 9.3 1, 2 and the signal amplitude of claim 10 tracks 3 9.4 constitute 10 9.5 recording direction 10 9.6 leading zeros and zero lead after 10 10 11 Coding Standards 10.1 Alphanumeric track --- the first track 11 10.2 --- digital track 2 track 13 10.3 --- digital tracks - Track 15 11 error detection 15 11.1 Parity 15 11.2 Longitudinal redundancy check (LRC) 15 12 position encoder track 16 Appendix A (informative) magnetic stripe read compatibility (GB/T 15120.2 and GB/T 15120.6) 17 Annex B (informative) abrasive magnetic stripe 18ForewordGB/T 15120 "Identification cards - Recording technique" is divided into the following sections. --- Part 1. letterpress; --- Part 2. low coercivity magnetic stripe; --- Part 3. Location on ID-1 type card embossed characters; --- Part 6. Magnetic stripe - High coercivity. This section GB/T 15120 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 15120.2-1994 "Identification cards - Recording technique - Part 2. Magnetic stripe", GB/T 15120.4-1994 "Section 4 Identification cards - Recording technique. read-only track the location of the first track and the second track" and GB/T 15120.5-1994 "knowledge Do cards - Recording technique - Part 5. read track position to the third track. " Users are encouraged to review the entire standard revisions and updates. The main changes in this revision are as follows. a) the requirements of GB/T 15120.4-1994 and GB/T 15120.5-1994 given already included in GB/T 15120.2 This release; b) The term "main criteria" to "Energy Standard"; c) an increase of some terms and definitions; d) an increase of some requirements. The partial modification of the use of ISO /IEC 7811-2.2001 "Identification cards - Recording technique - Part 2. low coercivity magnetic stripe." This part of ISO /IEC 7811-2.2001 compared, there is a small number of differences. a) Remove the foreword to international standards; b) Delete the text in most of the imperial units for the idiom industry, Imperial certain parts of the remains; c) According to the current source and standard two-pole standard migration, the source standard is defined as "a set of technology by the German Institute of Physics (PTB) Established and in the United States Q-Card to save Ji Zhunka representative value RM7811-2 designated UR and IR of "; the two Class standard "note" to "secondary standard can now be ordered from the United States Q-Card, address. 301ReaganStreet, Sunbury, PA17801, USA. Standard diode source will save at least until 2012 "; d) according to ISO /IEC 10373-2 is the latest version, delete the ISO /IEC 7811-2.2001 Appendix B "signal amplitude measurement." This part of the National Information Technology Standardization Technical Committee (SAC/TC28) proposed. This part of the jurisdiction of the China Electronics Standardization Institute. This section was drafted by. China Electronics Standardization Institute, Yunnannantian Electronic Information Industry Co., Ltd., China Lucky gum Chip company. The main drafters of this section. Feng Jing, Duan Xia, Jin Qian, Gao Lin, Geng force, Yuan Li, Wang Wenfeng, Qiaoshen Jie. This part of the standard replaces the previous editions are. --- GB/T 15120.2-1994; --- GB/T 15120.4-1994; --- GB/T 15120.5-1994. Identification cards - Recording technique Part 2. low coercivity magnetic stripe1 ScopeThis section GB/T 15120 is to describe the use of identification cards in the characteristics defined in Chapter 4, identification cards and international exchange standard series Quasi one. This section provides the identification card low coercivity magnetic stripe (including any protective coating) features, coding techniques, coding track the location and character Character sets. According to people, both machine factor establishes minimum requirements. Coercivity affect the provisions of this section, a number of values, but which is not provided for. The card being exposed to a magnetic field is likely to have been recorded The data is destroyed. This section applies to cards provide guidelines to be followed. In these standards do not consider the frequency of use, if necessary, under the previous card test Trial experience. If the card does not comply with the guidelines, we shall consult the parties involved in. ISO /IEC 10373-2 specifies the test procedures to check the card conforms to the parameters specified in this section. Note. In this section used in metric and/or imperial measuring system of value may have been converted, but not exactly equal to each other. Two formats are Use, but the two should not be mixed or reconversion. It was originally designed to use imperial measuring system.2 ComplianceCompliance with this prerequisite is in line with GB/T 14916. When the identification cards that comply with all mandatory requirements specified herein to sound He said compliance with this section. If not specified otherwise, the default value.3 Normative ReferencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3505 Geometrical product specifications (GPS) Surface texture Profile method - Terms, definitions and surface texture parameters (GB/T 3505-2009, ISO 4287.1997, IDT) GB/T 14916 Identification cards - Physical characteristics (GB/T 14916-2006, ISO /IEC 7810.2003, IDT) GB/T 17554.1 Identification cards - Test methods - Part 1. General characteristics of the test (GB/T 17554.1-2006, ISO / IEC 10373-1.1998, MOD) ISO /IEC 10373-2 Identification cards - Test methods - Part 2. Cards with magnetic stripes (Identificationcards-Testmeth- ods-Part 2. Cardswithmagneticstripes)4 Terms and DefinitionsGB/T 14916 and defined by the following terms and definitions apply to this document. 4.1 Energy Standard primarystandard A technology established by the German Institute of Physics (PTB), and in the United States Q-Card to save Ji Zhunka representative RM7811-2 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15120.2-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 15120.2-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15120.2-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15120.2-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15120.2-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15120.2-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
