GB/T 13652-2023 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13652-2023: Surface quality of aircraft tires
Status: Valid

GB/T 13652: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13652-2023	209	Add to Cart	3 days	Surface quality of aircraft tires	Valid
GB/T 13652-2004	239	Add to Cart	3 days	Surface quality of aircraft tyres	Obsolete
GB/T 13652-1992	199	Add to Cart	2 days	Surface quality of aircraft tyre	Obsolete

Similar standards

GB/T 12939   GB/T 10824   GB/T 16622   GB/T 14646   GB/T 13651   

Basic data

Standard ID: GB/T 13652-2023 (GB/T13652-2023)
Description (Translated English): Surface quality of aircraft tires
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G41
Classification of International Standard: 83.160.20
Word Count Estimation: 10,163
Date of Issue: 2023-12-28
Date of Implementation: 2024-07-01
Older Standard (superseded by this standard): GB/T 13652-2004
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 13652-2023: Surface quality of aircraft tires

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83:160:20 CCSG41 National Standards of People's Republic of China Replace GB/T 13652-2004 Aerospace tire surface quality Published on 2023-12-28 2024-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 13652-2004 "Surface Quality of Aeronautical Tires": Compared with GB/T 13652-2004, except for structural adjustments and In addition to editorial changes, the main technical changes are as follows: a) The requirements for qualified products for tire crown rubber edges have been changed (see item 1 of Table 1, item 1 of Table 1 of the:2004 edition); b) The requirements for qualified products with die gap misalignment have been changed (see item 2 of Table 1, item 2 of Table 1 in the:2004 edition); c) Added requirements for repairing missing glue in the pattern (see item 3 of Table 1, item 3 of Table 1 in the:2004 edition); d) Changed the requirements for qualified products with side skin or cracks in the tire (see item 4 of Table 1, item 4 of Table 1 in the:2004 edition); e) Changed the requirements for qualified products of bead fitting surface (see item 8 of Table 1, item 8 of Table 1 in the:2004 edition); f) The requirements for qualified products with tire toe fillets have been changed (see item 10 of Table 1, item 10 of Table 1 of the:2004 edition); g) Delete the dents or cracks in the lining (see item 14 of Table 1 of the:2004 edition); h) The requirements for qualified products of fully reinforced tire treads have been changed (see item 17 of Table 1, item 18 of Table 1 in the:2004 edition); i) The requirements for product marking of qualified products have been changed (see item 19 of Table 1, item 20 of Table 1 of the:2004 version); j) The cord break defect has been deleted (see item 23 of Table 1 of the:2004 edition); k) The traveler breakage defect has been deleted (see item 25 of Table 1 of the:2004 edition): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Petroleum and Chemical Industry Federation: This document is under the jurisdiction of the National Tire and Rim Standardization Technical Committee (SAC/TC19): This document was drafted by: China National Chemical Corporation Shuguang Rubber Industry Research and Design Institute Co:, Ltd:, Guilin Lanyu Aviation Tire Development Co:, Ltd: Company, Sanyak Co:, Ltd:, and Tsinghua University: The main drafters of this document: Gao Jing, Li Yuting, Lu Hengyu, Fu Yuncui, Huang Zhiyi, Zhang Juyin, Qi Yuemeng, Ma Chao, Zhang Lanyi, Liu Dameng: This document was first published in:1992, revised for the first time in:2004, and this is the second revision: Aerospace tire surface quality

1 Scope

This document specifies the surface quality requirements for aircraft tires: This document applies to the production and inspection of various types of aviation tires (hereinafter referred to as tires):

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 6326 Tire terminology

3 Terms and definitions

The terms and definitions defined in GB/T 6326 apply to this document:

4 Technical requirements

4:1 The tire surface quality should comply with the requirements in Table 1: Table 1 Surface quality Serial number Surface quality problem Qualified product standard Repairable standard

1 tire crown rubber edge

Tire nominal section width mm Glue edge base thickness mm ≤200 >200 ≤1:0 ≤2:0 2: Die gap misalignment Nominal outer diameter of tire mm offset value mm ≤600 >600 ≤0:5 ≤1:0 3: The pattern lacks glue or is round: Tire nominal section width mm Depth of glue shortage mm ≤200 >200 ≤1:0 ≤1:5 The pattern lacks rubber or is round and the cumulative length does not exceed the outside of the tire: 1/5 of the circumference Nonconforming items may be repaired or repaired: repair After repair or repair, the overall appearance of the tire should not be affected: Observe that there should be no obvious unevenness in the tread: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13652-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13652-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13652-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13652-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13652-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13652-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.