GB/T 13545-2014 English PDFUS$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13545-2014: Fired hollow bricks and blocks Status: Valid GB/T 13545: Historical versions
Basic dataStandard ID: GB/T 13545-2014 (GB/T13545-2014)Description (Translated English): Fired hollow bricks and blocks Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q15 Classification of International Standard: 91.100.15 Word Count Estimation: 15,127 Date of Issue: 6/24/2014 Date of Implementation: 2/1/2015 Older Standard (superseded by this standard): GB 13545-2003 Quoted Standard: GB/T 2542; GB 6566; GB/T 18968; JC/T 466 Regulation (derived from): National Standards Bulletin No. 14 of 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the terms and definitions sintering hollow bricks and blocks, product category, size, grade and labeling, technical requirements, test methods, inspection rules, marking, packaging, transport and storage. This Standard applies to c GB/T 13545-2014: Fired hollow bricks and blocks---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Fired hollow bricks and blocks ICS 91.100.15 Q15 National Standards of People's Republic of China Replacing GB 13545-2003 Sintered hollow bricks and blocks Issued on. 2014-06-24 2015-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 product categories, size, grade and mark 1 5 2 Technical Requirements Test Method 5 6 7 7 inspection rules 8 signs, packaging, transportation and storage 9 Divided Appendix A (normative) weathered zone 10 Annex B (informative) sintering hollow bricks and block diagram illustrating 11ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB 13545-2003 "sintering hollow bricks and blocks." This standard and GB 13545-2003 "sintering hollow bricks and blocks," compared to the main changes are as follows. --- The sludge, construction waste and other solid waste materials included in the scope of brick; --- Canceled superior products, first-class products, qualified quality grade requirements; --- Canceled MU2.5 intensity level; --- Canceled the joint determination of the strength and density; --- Increasing the requirements and pass the wall of the hole; --- Cancellation 3h absorption requirements; --- Increase 5h boiling water absorption requirements; --- Will receive constant compressive strength fk value of K = 1.8 is adjusted to K = 1.83, in order to promote and improve the uniformity of the strength of the product; --- Increased due to the brick (block), crisp brick (block) detection; --- Increase in Appendix B sintered hollow bricks and block schematic diagram. The standard proposed by China Building Materials Federation. This standard by the national wall, roof and road construction materials Standardization Technical Committee (SAC/TC285) with centralized. This standard is drafted by. China Building Materials Certification & Inspection Group Co., Ltd. in Xi'an, Xinjiang Urban Construction (Group) Co., Ltd. Participated in the drafting of this standard. Building Materials Research and Design Institute of Gansu Province, Tianyuan Construction Group Co., Ltd., Nanjing Xin Xiang new supplies Limited liability company, building materials product quality supervision, inspection, Guizhou Province, Shanghai Xin Jing Shan detect Development Co., Limited Hunan Branch-MATERIALS Secretary, Guilin-Hong Branch New Building Materials Co., Zibo skill Machinery Manufacturing Co., Ltd., Nanjing Shuangyang Building Material Machinery Manufacturing Co., Ltd., co Chong Machinery (Hangzhou) Co., Ltd. Shuangyashan Oriental Wall Material Group Co., Ltd. Shaanxi Baoshen Machinery (Group) Co., Ltd., Zibo Lu and building materials Limited liability company, Shandong New Building Material Co. kaolinite. The main drafters of this standard. Lin Ling, Zhu Yijun, Cai Xiaobing, Zhou Wan Ning, Li Zheng, Jiangde Yong, Chang Hao, Ren Ping will, Yan Gang, Wang Hui, Jiang Tao, Cheng Wei phase, Ao Zhiping, Chen Wenguang, to pay security, Xia Lina, Renzeng Mao, Gao Ling, Zhong Liming, Chai Changqing, Xie and roots Chenke Wen, Gao Hua, Li Jing, Lin Yongchun, Fang Sheng whole, Wu Zhenghong, Shao repair, Wang Jun, Shen Yuan Gang, Rick election, yet the country, Yang Bo, Song Xuhui, week-hyun. This standard replaces the standards previously issued as follows. --- GB 13545-1992, GB 13545-2003. Sintered hollow bricks and blocks1 ScopeThis standard specifies the sintered hollow bricks and blocks of terms and definitions, product type, size, grading and labeling, technical requirements, test Methods, inspection rules, marking, packaging, transportation and storage. This standard applies to clay, shale, coal gangue, fly ash, sludge (rivers, lakes and other sludges), construction waste and other solid waste As the main raw material, roasting, mainly used for building non-load-bearing parts of hollow bricks and blocks (hereinafter referred to as hollow bricks and Block).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Test methods for wall GB/T 2542 puzzle GB 6566 building materials radionuclide limits GB/T 18968 wall material terms JC/T 466 Wall bricks inspection rules3 Terms and DefinitionsGB/T 18968 and JC/T 466 terms and definitions apply to this document defined. 4 product categories, size, grade and mark 4.1 Category Press the main raw material into clay hollow bricks and blocks (N), shale hollow bricks and blocks (Y), coal gangue hollow bricks and masonry Block (M), fly ash hollow bricks and blocks (F), sludge hollow bricks and blocks (U), construction waste hollow bricks and blocks (Z), which His solid waste hollow bricks and blocks (G). 4.2 Specifications 4.2.1 hollow bricks and blocks of rectangular hexahedral shape (see Figure 1), mixing with water wall with hollow bricks and blocks, and surfaces and should Omo Stucco is provided with grooves uniformly distributed or similar structure, depth of not less than 2mm. 4.2.2 hollow bricks and blocks of length, width and height dimensions shall comply with the following requirements. --- Size Length (mm). 390,290,240,190,180 (175), 140; --- Size Width (mm). 190,180 (175), 140,115; --- Height Size (mm). 180 (175), 140,115,90. Other sizes are determined by supply and demand sides negotiated. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13545-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 13545-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13545-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13545-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13545-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13545-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
