GB/T 12690.2-2015 English PDFUS$88.00 · In stock
Delivery: <= 1 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 12690.2-2015: Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides -- Part 2: Determination of ignition loss content of rare earth oxides -- Gravimetric method Status: Valid GB/T 12690.2: Historical versions
Basic dataStandard ID: GB/T 12690.2-2015 (GB/T12690.2-2015)Description (Translated English): Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides -- Part 2: Determination of ignition loss content of rare earth oxides -- Gravimetric method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H14 Classification of International Standard: 77.120.99 Word Count Estimation: 4,485 Date of Issue: 2015-09-11 Date of Implementation: 2016-04-01 Older Standard (superseded by this standard): GB/T 12690.2-2002 Regulation (derived from): National Standard Announcement 2015 No.25 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the method for the determination of rare earth oxides in the loss on ignition. This Standard applies to the determination of loss on ignition of rare earth oxides. Measuring range: 0.10% to 15.00%. GB/T 12690.2-2015: Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides -- Part 2: Determination of ignition loss content of rare earth oxides -- Gravimetric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Non - rare earth impurities in rare earth metals and their oxides chemical analysis methods - Part 2. Determination of rare earth oxides in the weight loss on ignition method) ICS 77.120.99 H14 National Standards of People's Republic of China Replacing GB/T 12690.2-2002 Non - rare earth impurities in rare earth metals and their oxides Methods for chemical analysis - Part 2. Determination of rare earth oxides in the weight loss on ignition method rareearthmetalsandtheiroxides-Part 2. Determinationofignition Issued on. 2015-09-11 2016-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 12690 "non - rare earth impurities in rare earth metals and their oxides chemical analysis method" is divided into 18 parts. --- Part 1. Carbon and sulfur content was measured high frequency - infrared absorption method; --- Part 2. Rare Earth Oxides loss on ignition - Gravimetric method; --- Part 3. rare earth oxide in water content - Gravimetric method; --- Part 4. oxygen, nitrogen pulse measurement - infrared absorption method and pulse - heating thermal conductivity; --- Part 5. Determination of inductance aluminum, chromium, manganese, iron, cobalt, nickel, copper, zinc, lead coupled plasma emission spectrometry; Cobalt, manganese, lead, nickel, copper, zinc, aluminum, chromium was measured by inductively coupled plasma mass spectrometry; --- Part 6. Determination of iron content of potassium thiocyanate, 1,10-phenanthroline spectrophotometry; --- Part 7. Determination of silicon content - Molybdenum blue spectrophotometric method; --- Part 8. Determination of sodium content by flame atomic absorption spectrometry; --- Part 9. Determination of chlorine content of silver nitrate turbidimetry; --- Part 10. Determination of phosphorus content - Molybdenum blue spectrophotometric method; --- Part 11. Determination of magnesium content - Flame atomic absorption spectrometry; --- Part 12. Determination of the amount of thorium; --- Part 13. molybdenum, tungsten content was measured; --- Part 14. Determination of titanium content; --- Part 15. Determination of calcium; --- Part 16. Determination of the amount of fluorine ion selective electrode; --- Part 17. rare earth metals niobium, tantalum content of the determination; --- Part 18. Determination of the amount of zirconium. This section GB/T 12690 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This part is GB/T 12690.2-2002 "non - rare earth impurities in rare earth metals and their oxides gravimetric method for determination of chemical analysis Rare Earth Oxides ignition loss "amendments. This section compared with the GB/T 12690.2-2002, major technical changes in addition to editorial changes outside as follows. --- Reducing the measurement range from 0.10% to 20.00% to 0.10% - 15.00%; --- Increased quality assurance and control (see Chapter 9). This part of the National Standardization Technical Committee of rare earth (SAC/TC229) and focal points. This section is responsible for drafting unit. Ganzhou Nonferrous Metallurgy Research Institute. Participated in the drafting of this section. Beijing Nonferrous Metal Research Institute, southern Jiangxi Rare Earth High-tech Co., Guangdong Zhujiang Rare Earth Limited. The main drafters of this section. Kwong Jing, Xiao Juan, Liu, Liang Zhijie, Guo talented woman, Zhong Ting, Lin Qing, Yang Feng, Lai Jian, Liu Pengyu, Bao Ye Lin. This part of the standard replaces the previous release case. --- GB/T 12690.2-2002. Non - rare earth impurities in rare earth metals and their oxides Methods for chemical analysis - Part 2. Determination of rare earth oxides in the weight loss on ignition method1 ScopeGB/T 12690 provisions of this part of the determination of rare earth oxides in the loss on ignition. This section applies to the determination of loss on ignition of rare earth oxides. Measuring range. 0.10% to 15.00%.2 Method summarySample after 950 ℃ burning, burning is calculated by the difference between before and after the mass loss on ignition.3 instruments and equipment3.1 Analytical balance. dividing the value of 0.0001g. 3.2 high-temperature furnace. temperature > 1000 ℃.4 SampleAfter grinding the sample in an oven at 105 ℃ ~ 110 ℃ baking 1h, cooled to room temperature and placed in a desiccator and immediately weighed. Step 5 Analysis 5.1 Sample Weigh 1.50g ~ 2.00g sample (see Chapter 4), accurate to 0.0001g. 5.2 Determination of the number of Independently measured twice and averaged. 5.3 Determination 5.3.1 The sample (see 5.1) have been placed at 950 ℃ till constant weight porcelain crucible or platinum crucible at 950 ℃ burning 1h. Remove, slightly Cooled, placed in a desiccator to cool to room temperature, and weighed. Repeat operations 5.3.2 5.3.1 until constant mass porcelain crucible and burning objects.6 Calculation and presentation of analysis resultsAccording to equation (1) calculate the loss on ignition of mass fraction, expressed in%. w = m0 m2-m1 m0 × 100% (1) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12690.2-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 12690.2-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically in 24 hours. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 12690.2-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12690.2-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 12690.2-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12690.2-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
