GB/T 11989-2020 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11989-2020: Surface active agents - Test methods of technical sodium alkylarylsulphonates (excluding benzene derivatives) Status: Valid GB/T 11989: Historical versions
Basic dataStandard ID: GB/T 11989-2020 (GB/T11989-2020)Description (Translated English): Surface active agents - Test methods of technical sodium alkylarylsulphonates (excluding benzene derivatives) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G72 Classification of International Standard: 71.100.40 Word Count Estimation: 14,180 Date of Issue: 2020-04-28 Date of Implementation: 2020-11-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 11989-2020: Surface active agents - Test methods of technical sodium alkylarylsulphonates (excluding benzene derivatives)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Surface active agents--Test methods of technical sodium alkylarylsulphonates (excluding benzene derivatives) ICS 71.100.40 G72 National Standards of People's Republic of China Replace GB/T 11989-2008 Surfactant industrial sodium alkyl aryl sulfonate (Excluding benzene derivatives) Test method [ISO 1104. 1977, Surfaceactiveagents-Technicalsodium 2020-04-28 release 2020-11-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 11989-2008 "Determination of the content of anionic surfactants dissolved in petroleum ether", Compared with GB/T 11989-2008, the main technical changes are as follows. --- Modified the standard name; --- Modified the volume and temperature of the water required to dissolve the test parts (see A.4.2.1, 6.2.1 of the.2008 edition); --- Modify the solution required for phase separation (see A.4.2.2, 6.2.1 of the.2008 edition); --- Modified the sequence of adjusting the alkalinity (see A.4.2.2, 6.2.2 of the.2008 edition); --- Modified the solution required for demulsification (see A.4.2.3, 6.2.2 of the.2008 edition); --- Removed the extraction operation with plug measuring cylinder and siphon (see 6.2.3 of the.2008 edition) --- Modified the rest time of the ether phase after extraction (see A.4.2.5, 6.2.4 of the.2008 edition); --- Increased alcohol and water phase processing procedures for subsequent operations (see A.4.2.6); --- Modified the description of the petroleum ether phase wash end point (see A.4.2.7, 6.2.4 of the.2008 edition). This standard uses a redrafting method to modify the use of ISO 1104. 1977 "surfactant industrial sodium alkyl aryl sulfonate (excluding benzene derivative Biological) analysis method. Compared with ISO 1104. 1977, the structure adjustment of this standard is as follows. --- Chapter 1 corresponds to ISO 1104. 1977 Chapter 1, Chapter 2; --- Chapter 2 corresponds to Chapter 3 of ISO 1104. 1977; --- Added Chapter 3 "Terms and Definitions"; --- Deleted Chapter 4 and Chapter 5 of ISO 1104. 1977; --- Chapter 4 corresponds to 6.1 of ISO 1104. 1977; --- Chapter 5 corresponds to 6.2 of ISO 1104. 1977; --- Chapter 6 corresponds to 6.3 of ISO 1104. 1977; --- Chapter 7 corresponds to 6.4 of ISO 1104. 1977, and the test content is adjusted to Appendix A; --- Chapter 8 corresponds to 6.5 of ISO 1104. 1977, and the test content is adjusted to Appendix B; --- Chapter 9 corresponds to 6.6 of ISO 1104. 1977, and the test content is adjusted to Appendix D; --- Chapter 10 corresponds to 6.7 of ISO 1104. 1977; --- Chapter 11 corresponds to 6.8 of ISO 1104. 1977; --- Chapter 12 corresponds to Chapter 7 of ISO 1104. 1977; --- Appendix C corresponds to Appendix B of ISO 1104. 1977; --- Appendix E corresponds to Appendix A of ISO 1104. 1977. The technical differences between this standard and ISO 1104. 1977 and the reasons are as follows. --- With regard to normative quotation documents, this standard has been adjusted with technical differences to adapt to China's technical conditions and adjustments The situation is reflected in Chapter 2 "Regulatory Reference Documents", with specific adjustments as follows. ● Replace ISO 4314 with GB/T 6365 equivalent to international standards (see Chapter 6); ● Replaced ISO 6844 with GB/T 6366 modified to adopt international standards (see Chapter 10); ● Added references to GB/T 3050 (see Chapter 11), GB/T 6682 (see A.2, B.2, C.2, D.2) and QB/T 2739- 2005 (see A.2.7, etc.); ● Replace ISO 4316 with GB/T 6368 equivalent to international standards (see Chapter 4); ● Replaced ISO 4317 (see Chapter 5) with GB/T 11275 modified to adopt international standards; ● Removed ISO 607, ISO 894 and ISO 4318. --- In order to facilitate the use of the standard, Chapter 3 "Terms and Definitions" has been added. --- Because it was not used during the test, the requirements for sampling in Chapter 4 of ISO 1104. 1977 were deleted. --- Due to duplication of content, the contents of Chapter 5 of ISO 1104. 1977 have been deleted. --- In order to adapt to the use of China, the determination of water content has been modified (see Chapter 5). --- In order to adapt to the use situation in China, the determination method of sodium chloride content was modified (see Chapter 11). --- In order to adapt to China's usage habits and reagent specifications, the boiling range of petroleum ether was modified (see A.2.4). --- In order to adapt to the actual situation in China, acetone has been added to the reagent list (see A.2.8). --- According to China's operating habits, modified the type of flask (see A.3.1). --- According to China's operating habits, the fractionation column was deleted (see A.3). --- In order to adapt to the actual situation in China, the requirements of general laboratory utensils have been deleted (see A.3, B.3, C.3, D.3). --- In order to meet the test requirements, the retention of petroleum ether phase was modified (see A.4.2.3). --- In order to adapt to China's operating habits, the temperature of the water bath is specified (see B.4.2.4). --- In order to adapt to the actual situation in China, the color change of the titration end point is specified (see D.4.2). This standard also made the following editorial changes. --- Modified the standard name; --- Incorporate Chapter 1 of ISO 1104. 1977 and Chapter 2 of Chapter 1 of the cost standard; --- The introduction in the determination of petroleum ether extractables is changed to note (see A.1); --- Modify 2-propanol to isopropanol (see A.2.2 and B.2.3); --- Deleted the supplementary explanation of the last sentence in A.4.2.3 of ISO 1104. 1977; --- The removal process of the alcohol phase layer solution has been simplified (see C.4.2.4); --- Modified the expression of the requirements of the two weighing results changes (see A.4.2.7); --- Deleted the note in B.6 of ISO 1104. 1977. This standard was proposed by the China National Light Industry Council. This standard is under the jurisdiction of the National Technical Committee for Standardization of Surfactants and Detergents (SAC/TC272). This standard was drafted by. China National Daily Chemical Research Institute Co., Ltd. [National Detergent Quality Supervision and Inspection Center (Taiyuan)], Guangzhou Blue Moon Industrial Co., Ltd., Anhui Huakai Light Industry Technology Co., Ltd., Shenzhen Bagme Biological Technology Co., Ltd., surfactants and detergents Productivity Promotion Center of Polyester Industry, Guangdong Zhongfedong Fine Chemical Co., Ltd. The main drafters of this standard. Li Xiaorui, Zhang Jingfeng, Yang Liankai, Guo Hongtao, Yao Chenzhi, Zhou Huosheng. The previous versions of the standard replaced by this standard are as follows. --- GB/T 11989-1989, GB/T 11989-2008. Surfactant industrial sodium alkyl aryl sulfonate (Excluding benzene derivatives) Test method1 ScopeThis standard specifies the pH, water content, free base or free acid, petroleum ether extractables, and alkylaryl of industrial sodium alkylarylsulfonates Test methods for indicators such as sodium sulfonate, sodium sulfite, sodium sulfate, and sodium chloride. This standard applies to industrial sodium alkyl aryl sulfonates in the form of pastes or powders (excluding other products not related to preparation). This standard does not apply to sodium alkylbenzene sulfonate and liquid products.2 Normative referencesThe following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 3050 General method for determination of chloride content in inorganic chemical products Potentiometric titration method (GB/T 3050-2000, neq ISO 6227. 1982) GB/T 6365 Determination of free alkalinity or free acidity of surfactants by titration method (GB/T 6365-2006, ISO 4314. 1977, IDT) GB/T 6366 Determination of inorganic sulfate content of surfactants by titration method (GB/T 6366-2012, ISO 6844. 1983, MOD) GB/T 6368 Determination of pH value of surfactant aqueous solution potential method (GB/T 6368-2008, ISO 4316. 1977, IDT) GB/T 6682 Analysis laboratory specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) GB/T 11275 Determination of the water content of surfactants (GB/T 11275-2007, ISO 4317..1991, IDT) QB/T 2739-2005 Commonly used test methods for detergents Preparation of test solutions for titration analysis (volume analysis)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Free alkali or free acid freealkalinity or freeacidity Alkalinity or acidity measured with phenolphthalein as indicator. Note. It can be expressed as "alkali value" or "acid value" depending on the situation, that is, the number of milligrams of potassium hydroxide present in 1g product, or the potassium hydroxide required to neutralize 1g product Mg.4 Determination of pHAccording to the method stipulated in GB/T 6368, a 1% (mass fraction) solution of laboratory samples is used for determination. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11989-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 11989-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11989-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11989-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11989-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11989-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
