GB/T 11589-2011 English PDFUS$394.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11589-2011: International user classes of service in, and categories of access to, public data networks and integrated services digital networks (ISDNs) Status: Valid GB/T 11589: Historical versions
Basic dataStandard ID: GB/T 11589-2011 (GB/T11589-2011)Description (Translated English): International user classes of service in, and categories of access to, public data networks and integrated services digital networks (ISDNs) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: M19 Classification of International Standard: 33.040.40 Word Count Estimation: 20,250 Date of Issue: 2011-07-29 Date of Implementation: 2011-11-01 Older Standard (superseded by this standard): GB/T 11589-1999 Adopted Standard: ITU-T X.1-2000, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 11589-2011: International user classes of service in, and categories of access to, public data networks and integrated services digital networks (ISDNs)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. International user classes of service in, and categories of access to, public data networks and integrated services digital networks (ISDNs) ICS 33.040.40 M19 National Standards of People's Republic of China Replacing GB/T 11589-1999 Public data network and integrated services digital network (ISDN) International user business category and access type Internationaluserclassesofservicein, andcategoriesofaccessto, public datanetworksandintegratedservicesdigitalnetworks (ISDNs) (ITU-TX.1..2000, IDT) 2011-07-29 released 2011-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface I 1 Overview 1 2 access to the rental circuit data transmission business 2 3 access circuit to exchange data transmission service 4 4 access packet switching data transmission service 5 5 access frame relay data transmission service 12 Appendix A (informative appendix) nouns, terms English and Chinese comparison table 14 ForewordThis standard is based on the rules of GB/T 1.1-2009. This standard replaces the international user service category of GB/T 11589-1999 "public data network and integrated services digital network (ISDN) Into the species ". This standard and GB/T 11589-1999 compared to the main changes are as follows. In Table 10 of Chapter 5, "Access Frame Relay Data Transmission Service", the "B-ISDN Access FRDTS" content. --- In accordance with the provisions of GB/T 1.1-2009 "table should not contain the requirements", without affecting the meaning of the original table on the basis of changes For the footnote of the table. This standard uses translation methods to use ITU-TX.1..2000 "international users of the Common Data Network and Integrated Services Digital Network (ISDN) Business category and access type "(English version). And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows. --- GB/T 3382.1 Documentation of the three types of machines in the telephone network in the interoperability of technical conditions Part 1. for the transmission of documents three Standardization of facsimile terminals (GB/T 3382.1-2003, ITU-TT.4..1996, IDT); --- GB/T 3382.2 document fax three types of machines in the telephone network interoperability technical conditions Part 2. in the public telephone exchange network (GB/T 3382.2-2003, ITU-TT.30..1996, IDT); --- GB/T 11590 international data transmission services and optional user facilities for public data networks and ISDN networks (GB/T 11590- 2011, ITU-TX.2..2000, IDT); GB/T 11591 Assembly and Assembly (PAD) facilities in the public data network (GB/T 11591-2011, ITU-TX.3..2000, IDT); --- GB/T 11592 Common data The data terminal equipment (DTE) and the data circuit terminating device used for the start/stop transmission service (DCE) (GB/T 11592-2011, ITU-TX.20. 1988, IDT); --- GB/T 11593 Common data Synchronous work between the data terminal equipment (DTE) and the data circuit terminating device (DCE) (GB/T 11593-2001, idtITU-TX.21..1992); --- GB/T 11595 Dedicated circuit connected to the public data network packet data terminal equipment (DTE) and the end of the data circuit Interface (DCE) interface (GB/T 11595-1999, idtITU-TX.25..1996); --- GB/T 11596 start-stop data terminal into the national public data network packet assembly and disassembly (PAD) facilities DCE/DTE (GB/T 11596-1999, idtITU-TX.28..1997); --- GB/T 11599 Data terminal equipment (DTE) interface with synchronous V-series modem interface on common data network (GB/T 11599-2009, ITU-TX.21bis. 1988, IDT); --- GB/T 11600 Data terminal equipment (DTE) interface with asynchronous duplex V series modem interface on public data network Usage (GB/T 11600-2009, ITU-TX.20bis. 1988, IDT); --- GB/T 17801-1999 via public switched telephone network or integrated service digital network or circuit switched public data network access group Exchange interface between a packetized data terminal equipment (DTE) and a data circuit terminating device (DCE) of a public data network (GB/T 17801-1999, ITU-TX.32..1996, IDT); --- YD/T 891 Data terminal equipment for public data network providing frame relay data transmission service through dedicated circuit (DTD) and the data circuit terminating device (DCE) (YD/T 891-1997, ITU-TX.36..1996, IDT). This standard is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard is under the jurisdiction of China Communications Standardization Association. The drafting of this standard. Ministry of Industry and Information Technology Telecommunications Research Institute, Shanghai Bell Co., Ltd. The main drafters of this standard. Tang Xijing, Chen Cheng. This standard was first published in December 1989, the first revision in.1999, this time for the second revision. Public data network and integrated services digital network (ISDN) International user business category and access type1 OverviewThe establishment of a public network for data transmission in many countries and an integrated services digital network established for integrated services requires the development of user services Categories and access categories. This standard requires the following. a) provide a sufficient number of data signal rates to meet the needs of users; b) optimize the cost of data terminal equipment (DTE), transmission and exchange in order to provide comprehensive economic services to users; c) acknowledge the special operation of some user data terminal equipment; d) allowing the user to transmit information consisting of an arbitrary bit sequence higher than a certain number and any number of bits; e) Recognition of the interaction between user requirements, technical constraints and tariff structures may affect DTE access to public data transmission The method of doing things. The user service category is a category of data transmission service. In this kind of service, DTE operation mode, data signal rate, call control The signal rate and code structure (starting and ending) should be standardized. The access type identifies the method used by the DTE to access a particular data transmission service. There are four common data transmission services, namely. a) leased circuit data transmission services; b) circuit switched data transmission service (CSDTS); c) packet switched data transmission service (PSDTS); d) Frame Relay Data Transfer Service (FRDTS). This standard only defines the basic user equipment for these data transfer services. Other optional user devices are in ITU-TX.2 definition. The data terminal equipment (DTE) can access the data transmission service by any of the following connections. a) direct access. when the DTE is not connected through the intermediate switch network to provide business network; b) Port access. When the DTE is connected to the network providing the service via an intermediate switching network (see Figure 1). Port access can be achieved by any of the following connections. a) Switched connections. when a signaling or control procedure is required to establish or release DTE and provide a network connection for the service; b) Permanent connection. When a signaling or control procedure is not required to establish or release DTE and provide a network connection for the service (See Figure 2). The access type described in this standard takes into account direct access (see note) to the public data network and ISDN, as well as with other public Network interoperability of the port access; also included in accordance with ITU-TX.3, ITU-TX.5 or ITU-TX.8 through the group assembly and disassembly Equipment (PAD), facsimile packet assembly and disassembly equipment (FPAD) or multi-function packet assembly and disassembly equipment (MAP) function to packet switching data transmission industry The situation of the business. Note. You can use the method of renting a circuit or a dedicated circuit to provide direct access. For example, a packet terminal that conforms to the user service class 8 to 11 may access the common packet exchange through direct access (see note) or port access Data transmission service. Use the Circuit Switched Common Data Network (CSPDN), Public Switched Telephone Network (PSTN), ISDN or Frame Relay Number According to the PDN of the transmission service, port access can be established. In the case of all these accesses, the access packet-switched data transmission service will be available ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11589-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 11589-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11589-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11589-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11589-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11589-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
