GB/T 11276-2007 English PDFUS$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11276-2007: Surface active agents -- Determination of the critical micellization concentration Status: Valid GB/T 11276: Historical versions
Basic dataStandard ID: GB/T 11276-2007 (GB/T11276-2007)Description (Translated English): Surface active agents -- Determination of the critical micellization concentration Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G72 Classification of International Standard: 71.100.40 Word Count Estimation: 8,883 Date of Issue: 2007-08-13 Date of Implementation: 2008-02-01 Older Standard (superseded by this standard): GB/T 11276-1989; GB/T 11278-1989 Adopted Standard: ISO 6840-1982, NEQ; ISO 4311-1979, NEQ Regulation (derived from): China National Standard Approval Announcement2007 No.8 (Total No.108) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the determination of surfactant critical micelle concentration. This standard counter ion activity measuring method for the determination of cationic surfactants critical micelle concentration, ring surface tension measurement method for the determination of anionic and non -ionic surfactant critical micelle concentration. GB/T 11276-2007: Surface active agents -- Determination of the critical micellization concentration---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Surface active agents. Determination of the critical micellization concentration ICS 71.100.40 G72 National Standards of People's Republic of China Replacing GB/T 11276-1989, GB/T 11278-1989 Determination of surfactant critical micelle concentration Posted 2007-08-13 2008-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard counter ion activity measurements corresponding to ISO 6840. 1982 "hydroxide and hydrogen bromide cationic surfactants Determination of the critical micelle concentration of the counter ion activity measurement ", and ISO 6840. 1982 is non-equivalent degree of consistency; measuring the surface ring Tension method corresponds to ISO 4311. 1979 "Determination of anionic and non-ionic surfactant critical micelle concentration is measured with a plate or ring The method of "the amount of surface tension, and ISO 4311. 1979 is equivalent to the degree of non-uniformity. This standard after integration at the same time instead of GB/T 11276-1989 "cationic surfactant (hydroxide and hydrogen bromide) critical Determination of micelle concentration of counter ion activity measuring method "and GB/T 11278-1989" anionic and non-ionic surfactant critical micelle Concentration measurement ring measuring surface tension. " This standard and GB/T 11276-1989 and GB/T 11278-1989 compares major differences are. --- Standard Specification name as "surfactant critical micelle concentration determination"; --- The two national standards identical content merge into a single chapter; --- Increase the foreword. The standard proposed by China Petroleum and Chemical Industry Association. This standard is under the jurisdiction of Chemical Industry Standardization Technical Committee surfactant. This standard was drafted. Shanghai Dyestuffs Research Institute Co., Ltd. Drafters of this standard. Zhuangyong Bin, Cao Dan. This standard was first published in 1989. Determination of surfactant critical micelle concentration1 ScopeThis standard specifies the determination of surfactant critical micelle concentration. The standard counter ion activity measuring method for the determination of cationic surfactants critical micelle concentration; determination of surface tension ring Applicable to the determination of anionic and non-ionic surfactant critical micelle concentration.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, all subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, whether under this standard to encourage the parties to reach an agreement and research You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5549 surfactant was determined by drawing up liquid films surface tension (neq ISO 304. 1985) GB/T 6372 surfactant and detergent sample division method (GB/T 6372-2006, ISO 607. 1977, IDT)3 Terms and Definitions3.1 Aggregates in a surfactant solution above a certain critical micelle concentration of the molecules or ions thereof. 3.2 Specific concentration of surfactant in the solution is actually within a narrow temperature range. Above this concentration in particular, micelles The emergence and increasing cause sudden changes in the relationship between the physical properties of the solution and the concentration of some. 3.3 Ionic surfactant solubility increased sharply when the temperature is actually within a narrow temperature range, at this temperature, the solubility Equal to the critical micelle concentration (C.M.C). Principle 4 4.1 cationic surfactant critical micelle concentration determination Polycrystalline membrane ion-selective electrode, reference electrode cell measurement range of concentrations including the potential value of the expected critical micelle concentration, root According to the electrode potential and ion activity relationship --- Nernst equation, that the corresponding chloride or bromide ion activity, draw the potential value and concentration FIG logarithmic function, singularity quite critical micelle concentration curve. 4.2 Determination of anionic and non-ionic surfactant critical micelle concentration Determination of a series of different concentrations of anionic and non-ionic surface tension of the surfactant solution in a concentration including the critical micelle concentration. Drawn to the surface tension as ordinate, the logarithm of concentration as the horizontal curve, this singular point on the curve is the critical micelle concentration.5 Reagents and materials5.1 Distilled water. meet the specifications of the three water laboratory water requirements; 5.2 ethanol. chemically pure; 5.3 Potassium chloride. AR; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11276-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 11276-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11276-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11276-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11276-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11276-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |