GB/T 11063-2014 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11063-2014: Polyamide plate based flat belt
Status: Valid

GB/T 11063: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 11063-2014	229	Add to Cart	3 days	Polyamide plate based flat belt	Valid
GB/T 11063-2003	279	Add to Cart	3 days	Polyamide plate based flat belt	Obsolete
GB/T 11063-1989	399	Add to Cart	3 days	Polyamide plate based flat belt	Obsolete

Similar standards

GB/T 12585   GB/T 10822   GB/T 9573   GB/T 28267.3   GB/T 13552   GB/T 10541   

Basic data

Standard ID: GB/T 11063-2014 (GB/T11063-2014)
Description (Translated English): Polyamide plate based flat belt
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G42
Classification of International Standard: 21.220.10
Word Count Estimation: 10,166
Date of Issue: 12/5/2014
Date of Implementation: 7/1/2015
Older Standard (superseded by this standard): GB/T 11063-2003
Quoted Standard: GB/T 524; GB/T 1040.1; GB/T 1040.2; GB/T 5756; GB 11210; HG/T 2729
Regulation (derived from): Announcement of Newly Approved National Standards 2014 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the terms and definitions, structures, models and markers polyamide film base flat belt, requirements, test methods, inspection rules and signs, labels, packaging, transport and storage. This Standard applies to longitudinal tensil

GB/T 11063-2014: Polyamide plate based flat belt

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polyamide plate based flat belt ICS 21.220.10 G42 National Standards of People's Republic of China Replacing GB/T 11063-2003 Polyamide film base level band Issued on. 2014-12-05 2015-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 11063-2003 "polyamide film base with a flat" compared with the GB/T 11063-2003, in addition to editorial changes outside The main technical requirements changes are as follows. --- Increased joint thickness and belt thickness difference value δ (see 6.2.4); --- Modified flat belt tensile properties (see 63, 2003 version 5.3.); The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee and the friction belt drive with pulleys Technical Committee (SAC/TC428/SC3) centralized. This standard was drafted. Jinan Tianqi special flat belt Co., Qingdao City Product Quality Inspection Technology Research Institute. The main drafters of this standard. Jiao Dongying, Lizu Cheng, Sun Guangming, Hangao Liang, Wugui Qing. This standard replaces the standards previously issued as follows. --- GB/T 11063-1989, GB/T 11063-2003. Polyamide film base level band

1 Scope

This standard specifies the polyamide film base level band (hereinafter referred to as the flat band) terms and definitions, structures, models and marking requirements, test methods, Inspection rules and signs, labels, packaging, transport and storage. This standard applies to longitudinal tensile stretched polyamide film base layer is flat belts.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 524 flat belt GB/T 1040.1 Plastics Determination of tensile properties - Part 1. General (GB/T 1040.1-2006, ISO 527-1.1993, IDT) GB/1040.2 T Plastics Determination of tensile properties - Part 2. Test plastics molding and extrusion conditions (GB/T 1040.2- 2006, ISO 527-2.1993, IDT) GB/T 5756 conveyor terms and definitions (GB/T 5756-2009, ISO 5284. 1986, NEQ) Determination of GB 11210 vulcanized rubber antistatic and conductive products resistance Determination of HG/T 2729 vulcanized rubber sheet coefficient of sliding friction law

3 Terms and Definitions

GB/T 5756 defined by the following terms and definitions apply to this document. 3.1 Tensile strength tensilestrength When the flat belt to test the tensile fracture, the maximum tensile force applied to the polyamide sheet sample group than the original cross-sectional area. 3.2 1% modulus stressof1% elongation When the flat belt stretched sample to 1%, the tensile force applied to the polyamide sheet specimen cross-sectional area than the original group.

4 Structure

Tension flat belt layer is a polyamide film base. Flat belt structure are generally made on the covering layer, fabric layer, sheet base layer, fabric layer, lower cladding layer, and By polyamide film base and leather or other material composition (see Figure 1, Table 1). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11063-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11063-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11063-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11063-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11063-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11063-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.