GB/T 10544-2022 English PDFUS$319.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10544-2022: Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification Status: Valid GB/T 10544: Historical versions
Basic dataStandard ID: GB/T 10544-2022 (GB/T10544-2022)Description (Translated English): Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G42 Word Count Estimation: 16,138 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 10544-2022: Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification ICS 23.100.40; 83.140.40 CCSG42 National Standards of People's Republic of China Replacing GB/T 10544-2013 Rubber hoses and hose assemblies Wire Winding for Oil-Based or Water-Based Fluids Specification for reinforced rubber-clad hydraulic type (ISO 3862.2020, IDT) Published on 2022-03-09 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document replaces GB/T 10544-2013 "Rubber hoses and hose assemblies for oil-based or water-based fluids with wire wound reinforcement Compared with GB/T 10544-2013, except for structural adjustment and editorial changes, the main technical changes as follows. --- The upper limit temperature of water-based fluids in the range is expanded from 60°C to 70°C (see Chapter 1, Chapter 1 of the.2013 edition); --- For R15 type, a specification with a nominal inner diameter of 51 is added (see Table 1); ---In the pulse performance test, the "optional pulse test" has been incorporated into the "water-based fluid resistance test" as an option. The temperature of the water-based fluid Raised from 60°C to 70°C (see 7.4, 7.4 of the.2013 edition); --- Increased wear resistance test requirements (see 7.8); --- The immersion temperature of the water resistance test is increased to 70 °C, and the volume change rate of the inner lining and outer covering of the hose is respectively required (see 7.9.3, 7.8.3 of the.2013 edition); --- Increased the test frequency requirements (see Chapter 8). This document is equivalent to ISO 3862.2020 "Rubber hoses and hose assemblies suitable for oil-based or water-based fluids, wire wound reinforcement Specification for Rubber Covered Hydraulic Types. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Rubber and Rubber Products Standardization Technical Committee Hose Sub-Technical Committee (SAC/TC35/SC1). This document is drafted by. Guangzhou Rubber Hose Factory Co., Ltd., Hebei Yutong Special Rubber Hose Co., Ltd., China Light Union (Dalian) Packaging Research Institute Co., Ltd., Pingdingshan Kuoyi Hose Products Co., Ltd., Shenyang Fourth Rubber Co., Ltd., Henan Huilong Hydraulic Technology Co., Ltd. Co., Ltd., Hebei Dingli Pipe Industry Co., Ltd., Henan Xiuyuan Hydraulic Technology Co., Ltd., Qingdao Rubber Six Rubber Hose Co., Ltd., Hebei Xibelite Rubber Co., Ltd., Shenyang Rubber Research and Design Institute Co., Ltd. The main drafters of this document. Cai Hui, Lin Jiangang, Xing Gaofeng, Huang Liuhui, Hu Haichao, Cui Zangkui, Zhao Yongtao, Sun Lianzhong, Liu Jianye, Wang Yongfu, Yang Jizhou, Wang Peng, Huang Quanhan, He Ruibang, Zhao Cong, Sun Zhuoya, Pang Chuang, Faye Wong. This document was first published in 1989, revised for the first time in.2003, and revised for the second time in.2013, this time being the third revision. Rubber hoses and hose assemblies Wire Winding for Oil-Based or Water-Based Fluids Specification for reinforced rubber-clad hydraulic type1 ScopeThis document specifies five types of wire wound reinforced hydraulic hoses and hose assemblies with a nominal inner diameter of 6.3mm~51mm. Require. This document applies to hoses and hose assemblies using the following media. ---HH, HL, HM, HR and HV oil-based hydraulic fluids defined by ISO 6743-4, of which 4SP and 4SH types are applicable to the temperature range The temperature range is -40℃~100℃, and the applicable temperature range of R12, R13 and R15 type is -40℃~120℃; ---HFC, HFAE, HFAS and HFB type water-based hydraulics with a temperature range of -40°C to 70°C as defined by ISO 6743-4 fluid; --- Water with a temperature range of 0°C to 70°C. This document does not cover requirements for joints. Only for hose and assembly requirements. NOTE. It is the user's responsibility to consult the hose manufacturer to confirm the compatibility of the hose with the fluid being used.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 14905-2020 Determination of adhesive strength between layers of rubber and plastic hoses (ISO 8033.2016, IDT) assemblies-Hydrostatic testing) Note. GB/T 5563-2013 Hydrostatic test method for rubber and plastic hoses and hose assemblies (ISO 1402.2009, IDT) Note. GB/T 1690-2010 Test method for liquid resistance of vulcanized or thermoplastic rubber (ISO 1817.2005, MOD) ISO 4671 Rubber and plastic hoses and hose assemblies Method of measurement of hose dimensions and length of hose assemblies (Rubberand Note. GB/T 9573-2013 Rubber and plastic hoses and hose assemblies—Hose dimensions and hose assembly length measurement methods (ISO 4671.2007, IDT) andhoseassemblies) Note. GB/T 7939-2008 Test method for hydraulic hose assembly (ISO 6605.2002, MOD) ISO 6743-4 Classification of Lubricants, Industrial Oils and Related Products (Class L) Part 4.Group H (Hydraulic Systems) draulicsystems)] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10544-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 10544-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10544-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10544-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10544-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10544-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
