GB/T 10335.5-2023 English PDFUS$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10335.5-2023: Coated paper and board - Part 5: Coated linerboard Status: Valid GB/T 10335.5: Historical versions
Basic dataStandard ID: GB/T 10335.5-2023 (GB/T10335.5-2023)Description (Translated English): Coated paper and board - Part 5: Coated linerboard Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y31 Classification of International Standard: 85.060 Word Count Estimation: 10,175 Date of Issue: 2023-12-28 Date of Implementation: 2024-07-01 Older Standard (superseded by this standard): GB/T 10335.5-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 10335.5-2023: Coated paper and board - Part 5: Coated linerboard---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 85:060 CCSY31 National Standards of People's Republic of China Replace GB/T 10335:5-2008 Coated paper and paperboard Part 5: Coated containerboard Published on 2023-12-28 2024-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 5 of GB/T 10335 "Coated Paper and Paperboard": GB/T 10335 has released the following parts: ---Coated art printing paper (coated paper) (GB/T 10335:1-2017); ---Lightweight coated paper (GB/T 10335:2-2018); ---Coated white cardboard (GB/T 10335:3-2018); ---Coated white cardboard (GB/T 10335:4-2017); ---Part 6: Water-based coated paper (GB/T 10335:6-2023): This document replaces GB/T 10335:5-2008 "Coated Paper and Paperboard Coated Containerboard": Compared with GB/T 10335:5-2008, except In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Changed the basis weight, width difference, tightness, transverse ring pressure strength index, transverse folding endurance, printing surface roughness, and printing gloss strength, printing surface strength, ink absorbency, water absorbency, dustiness, dimensional deviation, skewness, appearance quality requirements (see 5:1,:2008 version 4:1); b) Added quantitative deviation, internal bonding strength, gloss requirements and test methods (see 5:1, 6:3, 6:8 and 6:11); c) The smoothness requirements and test methods are deleted (see 4:1 and 5:10 of the:2008 edition); d) Delete "the thickness should be consistent", "there should be no delamination without external force" and "the ends of roll-coated boxboard" in the appearance quality: The surface should be flat, and the jagged or concave and convex surfaces formed should not exceed the requirements of 5mm (see 4:3:1, 4:3:2 and 4:3:6 of the:2008 edition); e) The calculation formula of banner quantitative difference is deleted (see 5:4 of the:2008 edition); f) The test conditions for printing surface roughness have been changed (see 6:10, 5:11 of the:2008 edition); g) Changed the test method for printing surface strength (see 6:13, 5:13 of the:2008 edition); h) The factory inspection items have been changed (see 7:4, 6:4 of the:2008 edition); i) The sampling inspection items have been changed (see 7:5, 6:5 of the:2008 version): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Paper Industry Standardization Technical Committee (SAC/TC141): This document was drafted by: Shandong Century Sunshine Paper Group Co:, Ltd:, China Pulp and Paper Research Institute Co:, Ltd:, Medium and Light Paper Products Inspection Certification Co:, Ltd:, Zhongqing (Jinjiang) Hygiene Products Research Co:, Ltd: The main drafters of this document: Zuo Jianbo, Wang Dongxing, Feng Yafang, Ci Xiaolei, Xu Huimin, Yang Deqing, Yuan Taojing, Wang Xinting, and Zhang Meng: The previous versions of this document and the documents it replaces are as follows: ---First published as GB/T 10335:5-2008 in:2008; ---This is the first revision:IntroductionGB/T 10335 "Coated Paper and Paperboard" will improve the quality level of domestic products, reduce environmental pollution, and provide guidance for the production of coated paper and paperboard It plays a guiding role and is planned to be composed of six parts: ---Part 1: Coated art printing paper (coated paper): The purpose is to stipulate that the base paper suitable for single-layer paper making should be calendered and finished after coating: Made of decorative materials, it is used for the coating beauty of albums, pictorials, book covers, inserts, art pictures and product trademarks printed in monochrome or color: Technical requirements and related methods for technical printing paper, thereby standardizing industry product production and improving product quality: ---Part 2: Lightweight coated paper: The purpose is to stipulate that the coating amount per side is not more than 10g/m2, mainly used for single color or color Technical requirements and related methods for lightweight coated paper for color-printed books, periodicals, promotional materials, etc: ---Part 3: Coating white cardboard: The purpose is to stipulate that the surface layer and bottom layer of base paper are mainly bleached wood pulp, and the middle layer is added with Mechanical wood pulp or chemical wood pulp is made by coating on one or both sides and then calendering: It is mainly used for printing art prints or Technical requirements and related methods for coating white cardboard to produce packaging cartons for high-end products after printing: ---Part 4: Coated white cardboard: The purpose is to stipulate that the surface layer of the base paper is bleached pulp, which is made by calendering and finishing after coating: Technical requirements and related methods for coated white paperboard: ---Part 5: Coated container board: The purpose is to stipulate that it is applicable to cases where the top layer is mainly bleached wood pulp and the bottom layer is mainly unbleached kraft wood pulp: Mainly, the technical requirements and related methods of coated containerboard made by single-sided coating: ---Part 6: Water-based coated paper: The purpose is to specify the technical requirements and relevant requirements for water-based coated papers suitable for non-food packaging purposes: Off method: Coated paper and paperboard Part 5: Coated containerboard1 ScopeThis document specifies the requirements, inspection rules and marking, packaging, transportation and storage of coated boxboards, describes the corresponding test methods, and provides information about the classification: This document is applicable to coated box paper made of single-sided coating, which is mainly made of bleached wood pulp as the top layer and unbleached kraft wood pulp as the bottom layer: Production, inspection and sales of boards:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 450 Collection of paper and cardboard samples and measurement of longitudinal, transverse, front and back sides of the samples GB/T 451:1 Determination of dimensions and deflection of paper and cardboard GB/T 451:2 Paper and cardboard Part 2: Quantitative determination GB/T 451:3 Determination of thickness of paper and cardboard GB/T 457-2008 Determination of folding resistance of paper and cardboard GB/T 462 Determination of moisture content of paper, cardboard and pulp analysis samples GB/T 1539 Determination of bursting strength of cardboard GB/T 1540 Determination of water absorption of paper and cardboard - Cobb method GB/T 1541 Determination of dustiness of paper and cardboard GB/T 2679:8 Determination of ring crush strength of paper and cardboard GB/T 2828:1 Enumeration sampling inspection procedures Part 1: Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 7974 Determination of blue light diffuse reflection factor D65 brightness of paper, cardboard and pulp (diffuse/vertical method, outdoor daylight conditions) GB/T 7975 Determination of color of paper and cardboard (diffuse reflectance method) GB/T 8941 Determination of specular gloss of paper and cardboard GB/T 10342 Paper packaging and marking GB/T 10739 Standard atmospheric conditions for handling and testing of paper, paperboard and pulp samples GB/T 12032 Preparation of gloss prints for paper and cardboard printing GB/T 12911 Determination of ink absorbency of paper and paperboard GB/T 22363-2008 Determination of roughness of paper and cardboard (air leakage method) Bentson method and printed surface method GB/T 22365-2008 Determination of printed surface strength of paper and cardboard GB/T 26203 Determination of internal bonding strength of paper and cardboard (Scott type)3 Terms and definitionsThere are no terms or definitions to be defined in this document: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10335.5-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 10335.5-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10335.5-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10335.5-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10335.5-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10335.5-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
