GB 6675.3-2014 PDF EnglishUS$145.00 · In stock · Download in 9 seconds
GB 6675.3-2014: Safety of toys -- Part 3: Flammability Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB 6675.3-2014: Safety of toys -- Part 3: Flammability---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB6675.3-2014GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.200.50 Y 57 Replacing GB 6675-2003 Safety of toys – Part 3.Flammability (ISO 8124-2.2007, Safety of toys – Part 2.Flammability, MOD) Issued on. MAY 6, 2014 Implemented on. JANUARY 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 6 4 Technical requirements... 7 5 Test methods... 11 6 Test report... 19 Annex A (Informative) Background and rationale for this document... 20 Annex B (Informative) Piled fabrics surface flash test method... 22ForewordAll technical content of this Part is compulsory. GB 6675 is a standard series relating to safety of toys, which comprises the parts as follows. -- Basic code (GB 6675.1); -- General requirements, including but not limited to Mechanical and physical properties (GB 6675.2), Flammability (GB 6675.3) and Migration of certain elements (GB 6675.4); -- particular requirements. This Part is the requirements for certain products. This Part is Flammability (GB 6675.3) of the general requirements of the standard series of safety of toys, which shall be used in combination with GB 6675.1, GB 6675.2, GB 6675.4 and GB 19865 (only applicable to electric toys). This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB 6675-2003, National safety technical code for toys. Compared with GB 6675-2003 and Annex B, the major changes of this Part are as follows. -- 5 definitions are added in Clause 3, including “molten drips, flammable gases, flammable liquids, highly flammable liquids and highly flammable solids”; -- 2 technical requirements are added, i.e. the technical requirements for “full or partial molded head masks” and “flowing elements of toys to be worn on the head”; -- it changes part of the content of “soft-filled toys”, i.e. different test methods are specified in accordance with the dimensions of soft-filled toys; -- the informative annex B to this Part was drafted by referencing EN 1103, Textiles – Fabrics for apparel – Detailed procedure to determine the burning behavior and ISO 6941, Textile fabrics – Burning behavior – Measurement of flame spread properties of vertically oriented specimens, providing a reference test method for the surface flash of piled fabrics. This Part was redrafted, modifying and adopting ISO 8124-2.2007, Safety of toys – Part 2.Flammability. The technical differences between this Part and ISO 8124-2.2007, and their reasons are as follows. -- with respect to normative references, this Standard gives some adjustments having technical differences, in order to adapt to the technical conditions of China. The adjustments which are collectively reflected in Clause 2, are as follows. use the modified and adopted international standard GB 6675.2-2014 to replace ISO 8124-1.2000, ISO 8124-1/Amd.1 and ISO 8124-1/Amd.2; use the equivalently adopted international standard GB 6753.4-1998 to replace ISO 2431.1993. -- a reference test method is added. See Annex B. This Part was proposed by China Light Industry Council. This Part shall be under the jurisdiction of National Technical Committee 253 on Toys of Standardization Administration of China. The drafting organizations of this Part. Yangzhou Import-Export Toy Inspection Institute, Beijing Certification Centre of Light Industry Council, Toy Laboratory of Guangdong Inspection and Quarantine Technology Centre, Guangdong Alpha Animation and Culture Co., Ltd., GoodBaby Children Products Co., Ltd., Shenzhen Academy of Metrology and Quality Inspection, Fujian Inspection and Research Institute for Product Quality, China Shanghai Import-Export Toy Inspection Centre, Toy Testing Technology Center of Shenzhen Entry-Exit Inspection and Quarantine Bureau, Vkan Certification and Testing Co., Ltd., Zhejiang Institute of Quality Inspection and Technical Research. The main drafters of this Part. Liu Xin, Yan Wei, Lei Zaiming, Wang Long, Huang Tao, Ke Dengming, Chen Wei, Fu Xiaomei, Yin Lijuan, Zhang Xia, Liu Gonggui, Ding Hao. The previous editions of the standard replaced by this Part are as follows. -- GB 6675-1986, GB 6675-2003. Safety of toys – Part 3.Flammability1 ScopeThis Part of GB 6675 specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition dated applies to this document. For undated references, the latest edition of the referenced documents (including all amendments) applies to this document. GB 6675.2-2014, Safety of toys - Part 2.Mechanical and physical properties (ISO 8124-1.2000, MOD)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. rapid spread of flame over the surface of a material without ignition of its base structure at the same time4 Technical requirementsWhen tested in accordance with 5.3, the duration of flaming shall not be more than 2 s after the removal of the test flame. The maximum distance between the upper edge of the burnt area and the point of application of the test flame shall not be more than 70 mm. Cardboard partial masks with no hair, pile or other attachments (other than those for securing the toys) are excluded.5 Test methodsThe test flame shall be obtained from a burner as described in ISO 6941.2003, Annex A, and shall be operated with butane or propane gas. Light the burner described in 5.1.2 and pre-heat for a minimum of 2 min.6 Test reportA test report shall be provided and shall contain at least the following information.Annex A(Informative) Background and rationale for this document The contents of this Part of GB 6675 take into consideration those toys that could give rise to significant risk of injury to a child from the hazards presented by potential flammability.Annex B(Informative) Piled fabrics surface flash test method This Annex gives the method for testing whether piled fabrics or similar piled fabrics comply with the standard requirements. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 6675.3-2014 be delivered?Answer: The full copy PDF of English version of GB 6675.3-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 6675.3-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB 6675.3-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 6675.3-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB 6675.3-2014?A step-by-step guide to download PDF of GB 6675.3-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 6675.3-2014". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
