GB/T 5170.10-2017 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5170.10-2017: Inspection methods for environmental testing equipment -- Part 10: Combined high and low temperature/low air pressure testing equipment Status: Valid GB/T 5170.10: Historical versions
Basic dataStandard ID: GB/T 5170.10-2017 (GB/T5170.10-2017)Description (Translated English): Inspection methods for environmental testing equipment -- Part 10: Combined high and low temperature/low air pressure testing equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K04 Classification of International Standard: 19.040 Word Count Estimation: 14,138 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Older Standard (superseded by this standard): GB/T 5170.10-2008 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 5170.10-2017: Inspection methods for environmental testing equipment -- Part 10: Combined high and low temperature/low air pressure testing equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Inspection methods for environmental testing equipments - Part 10. Combined high and low temperature/low air pressure testing equipments ICS 19.040 K04 National Standards of People's Republic of China Replacing GB/T 5170.10-2008 Environmental testing equipment test methods Part 10. High and low temperature and pressure testing equipment Part 10.Combinedhighandlowtemperature/lowairpressuretestingequipments 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 test items 1 5 test equipment and requirements 2 6 test load 2 7 test conditions 2 8 test methods 3 9 test results 9 10 inspection cycle 9 ForewordGB/T 5170 contains the following sections. --- GB/T 5170.1-2016 Environmental testing equipment for electric and electronic products test methods Part 1. General; --- GB/T 5170.2-2017 Environmental testing equipment test methods Part 2. Temperature test equipment; --- GB/T 5170.5-2016 Environmental testing equipment for electric and electronic products - Test methods - Part 5. Wet heat test equipment; --- GB/T 5170.8-2017 Environmental testing equipment test methods Part 8. Salt spray test equipment; --- GB/T 5170.9-2017 environmental testing equipment test methods Part 9. Solar radiation test equipment; --- GB/T 5170.11-2017 environmental test equipment test methods Part 11. Corrosion gas test equipment; --- GB/T 5170.13-2005 electrical and electronic products environmental testing equipment basic parameters of the test method Vibration (sine) test Mechanical vibration table; --- GB/T 5170.14-2009 Environmental testing equipment for electrical and electronic products Basic parameters testing methods Vibration (sine) test Electric shaker; --- GB/T 5170.15-2005 electrical and electronic products environmental testing equipment basic parameters of the test method Vibration (sine) test Hydraulic vibration table; --- GB/T 5170.16-2005 electrical and electronic products environmental testing equipment basic parameters test method for steady-state acceleration test Centrifuge --- GB/T 5170.17-2005 Environmental testing equipment for electric and electronic products Basic parameters verification method Low temperature/low pressure/hot and humid Integrated sequential test equipment; --- GB/T 5170.18-2005 electrical and electronic products environmental testing equipment basic parameters of the test method temperature/humidity combination cycle Test equipment --- GB/T 5170.19-2005 electrical and electronic products environmental testing equipment basic parameters verification method Temperature/vibration (sine) Test equipment; --- GB/T 5170.20-2005 test methods for basic parameters of environmental testing equipment for electric and electronic products Water test equipment; --- GB/T 5170.21-2008 Environmental testing equipment for electrical and electronic products Basic parameters testing methods Vibration (random) test Hydraulic vibration table. This section GB/T 5170 Part 10. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part Replaces GB/T 5170.10-2008 "test methods for environmental testing equipment for electric and electronic products High and low temperature and pressure test set Prepare ". Compared with GB/T 5170.10-2008, the main technical changes are as follows. --- Range from the original "test equipment used for the first test/acceptance test and periodic test" to "test equipment used" (see Chapter 1); --- Normative references deleted GB/T 16839.1, IEC 60751, an increase of GB 12348-2008 (see Chapter 2); --- Test items modified to be given in the form of a list (see Chapter 4); --- Test item "every 5min average temperature change rate" to "5min average temperature change rate" (see Table 1); --- Test equipment and requirements, the temperature measurement system from the original "measurement of the expansion of uncertainty (k = 2) is not greater than the seized One-third of the temperature allowable deviation ", revised as" the maximum allowable error is generally not more than ± 0.2 ℃ "; pressure measurement system by The original "extended uncertainty of measurement results (k = 2) is not greater than one-third of the allowable deviation of the pneumatic pressure being inspected", revised to "large At 2kPa, the maximum allowable error is generally not more than ± 0.1kPa; not more than 2kPa, the maximum allowable error is generally not more than ± 0.03kPa "; sound level meter with A-weighted network from the original" expanded uncertainty of the measurement results (k = 2) of not more than 1dB " Revised to "the maximum allowable error generally does not exceed ± 1dB" (see Table 2); --- Reorganized the structural level of inspection methods (see Chapter 8); --- The inspection report adds the information which should at least include (see 9.3); --- Removed Appendix A "test item selection." This part of the National Electrical and Electronic Environmental and Environmental Test Standardization Technical Committee (SAC/TC8) and focal point. This part of the drafting unit. Ministry of Industry and Information Technology Fifth Institute, Guangzhou Environmental Instrument Co., Ltd. 5, China Electric Apparatus Research Institute Institute Co., Ltd., Fujian Province, to new offshore wind R & D Center Co., Ltd., China Aviation Industry Corporation Beijing Great Wall Measurement Test Technology Institute, Wuxi Sawat Test Equipment Co., Ltd. The main drafters of this section. Xiekai Feng, Xie Chenhao, Huang Kaiyun, Li Da, Lv Guoyi, Zhou Zhongming, exposing dare new, Cai Jinwen, Yuan Cheng, He Meng. This part replaces the standards previously issued as. --- GB 5170.10-1985, GB/T 5170.10-1996, GB/T 5170.10-2008. Environmental testing equipment test methods Part 10. High and low temperature and pressure testing equipment1 ScopeGB/T 5170 provisions of this part of the high and low temperature and pressure (including low pressure, low temperature and low pressure and high temperature and low pressure) test equipment (the following Referred to as "equipment") test items, test equipment and requirements, test load, test conditions, test methods, test results, test cycles content. This section applies to the GB/T 2423.21, GB/T 2423.25 and GB/T 2423.26 test equipment used. This section also applies to the inspection of similar equipment.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2423.21 Environmental testing for electric and electronic products Part 2. Test methods Test M. Low pressure GB/T 2423.25 Environmental testing for electric and electronic products Part 2. Test methods Test Z/AM. Low temperature/low pressure synthesis test GB/T 2423.26 Environmental testing for electric and electronic products Part 2. Test methods Test Z/BM. High temperature/low pressure synthesis test GB/T 5170.1-2016 Environmental testing equipment for electric and electronic products - Test methods - Part 1. General Environmental Noise Emission Standards for Industrial Enterprises3 Terms and definitionsGB/T 5170.1-2016 Terms and definitions apply to this document.4 test itemsThis part of the test items in Table 1. Table 1 test items Serial number test items1 low pressure deviation2 low pressure indicating error3 low pressure rate of change4 comprehensive test temperature deviation5 comprehensive test low pressure deviation......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5170.10-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 5170.10-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5170.10-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5170.10-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5170.10-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5170.10-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
