GB/T 5170.15-2018 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5170.15-2018: Inspection methods for environmental testing equipment -- Part 15: Hydraulic vibrating type system for vibration (sinusoidal) test Status: Valid GB/T 5170.15: Historical versions
Basic dataStandard ID: GB/T 5170.15-2018 (GB/T5170.15-2018)Description (Translated English): Inspection methods for environmental testing equipment -- Part 15: Hydraulic vibrating type system for vibration (sinusoidal) test Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K04 Classification of International Standard: 19.040 Word Count Estimation: 14,165 Date of Issue: 2018-12-28 Date of Implementation: 2019-07-01 Older Standard (superseded by this standard): GB/T 5170.15-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5170.15-2018: Inspection methods for environmental testing equipment -- Part 15: Hydraulic vibrating type system for vibration (sinusoidal) test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Inspection methods for environmental testing equipments--Part 15. Hydraulic vibrating type system for vibration(sinusoidal) test ICS 19.040 K04 National Standards of People's Republic of China Replace GB/T 5170.15-2005 Environmental test equipment inspection method Part 15. Hydraulic (sinusoidal) test hydraulic Vibration system Part 15. Hydraulicvibratingtypesystemforvibration(sinusoidal)test Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Feature requirements 3 5 measuring instruments 4 6 Measurement uncertainty 4 7 Test conditions 5 8 General Provision 5 9 Test Method 5 10 test results 7 11 inspection cycle 7 Appendix A (informative) Description of measurement uncertainty in inspections 8ForewordGB/T 5170 contains the following sections. --- GB/T 5170.1-2016 Electrical and electronic products - Test methods for environmental testing equipment - Part 1. General --- GB/T 5170.2-2017 Environmental testing equipment testing methods - Part 2. Temperature testing equipment; GB/T 5170.5-2016 - Test methods for environmental testing equipment - Part 5. Damp heat test equipment; --- GB/T 5170.8-2017 Test methods for environmental testing equipment - Part 8. Salt spray test equipment; --- GB/T 5170.9-2017 Environmental testing equipment - Test methods - Part 9. Solar radiation test equipment; --- GB/T 5170.10-2017 Environmental testing equipment - Test methods - Part 10. High and low temperature low pressure test equipment; --- GB/T 5170.11-2017 Environmental testing equipment - Test methods - Part 11. Corrosion gas test equipment; Environmental testing equipment - Part 13. Mechanical vibrations for vibration (sinusoidal) test system; ---GB/T 5170.14-2009 Environmental test equipment basic parameters test method Vibration (sinusoidal) test electric vibration table; system; GB/T 5170.16-2018 - Test methods for environmental testing equipment - Part 16. Centrifugal machines for steady-state acceleration test; ---GB/T 5170.17-2005 Electrical and electronic products environmental testing equipment basic parameters verification method low temperature/low pressure/damp heat Integrated sequential test equipment; ---GB/T 5170.18-2005 Electrical and electronic products environmental testing equipment basic parameters verification method temperature/humidity combination cycle Test equipment GB/T 5170.19-2018 Test methods for environmental testing equipment - Part 19. Temperature, vibration (sinusoidal) comprehensive test device; ---GB/T 5170.20-2005 Electrical and electronic products environmental testing equipment basic parameters verification method water test equipment; ---GB/T 5170.21-2008 Electrical and electronic products environmental testing equipment basic parameters test method vibration (random) test Hydraulic shaker. This part is the 15th part of GB/T 5170. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 5170.15-2005 "Electrical and electronic products environmental test equipment basic parameters test method vibration (sinusoidal) test The hydraulic vibration table is tested. Compared with GB/T 5170.15-2005, the main technical changes are as follows. --- For ease of use, repeat some of the terms and definitions in GB/T 5170.1 (see 3.3, 3.4, 3.7); --- Deleted the original Chapter 4 "Verification Project" and changed to "Feature Requirements" (see Chapter 4); --- The GB/T 2423.10 "test equipment" does not stipulate the relevant requirements of the inspection items from this part, and delete the relevant Measuring instrument requirements; --- Added the chapter "Measurement Uncertainty" (see Chapter 6); --- For ease of use, the environmental conditions at the time of the specific test are listed (see 7.1); ---Delete the "Multi-Axis Shaking Table", "Frequency Point Selection", "Amplitude Selection", "Conversion Formula for Acceleration and Displacement" in "General Provisions" Regulations; --- Changed the calculation formula of "lateral vibration ratio" (see 9.4,.2005 edition 8.5); --- According to the requirements of GB/T 5170.1, the "inspection report should include at least the following information" (see Chapter 10); --- Removed the original Appendix A, Appendix B; --- Added Appendix A "Description of Measurement Uncertainty in Inspection". This part is proposed and managed by the National Technical Committee for Environmental Conditions and Environmental Testing Standardization of Electrical and Electronic Products (SAC/TC8). This section drafted by. Ministry of Industry and Information Technology Electronics Fifth Institute, Xiamen Saibao Industrial Technology Research Institute Co., Ltd., Guangzhou Saibao Metrology and Testing Center Service Co., Ltd., Foshan Saibao Information Industry Technology Research Institute Co., Ltd., Suzhou Su Test Equipment Co., Ltd. the company. The main drafters of this section. Zheng Shuli, Liu Guodong, Yan Fei, Xu Jun, Lu Wei, Fan Chenggang, Zhong Wei, Huang Xiaoguang. The previous versions of the standards replaced by this section are. ---GB/T 5170.15-1985, GB/T 5170.15-2005. Environmental test equipment inspection method Part 15. Hydraulic (sinusoidal) test hydraulic Vibration system1 ScopeThis part of GB/T 5170 specifies the characteristics of the vibration (sinusoidal) test hydraulic vibration system (hereinafter referred to as the vibration system), Measuring instruments, measurement uncertainty, inspection load, inspection conditions, inspection methods, inspection results, inspection cycles. This section applies to the GB/T 2423.10 vibration test vibration test. This section also applies to inspections of similar test equipment.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 5170.1-2016 - Test methods for environmental testing equipment - Part 1 . General JJF1059.1-2012 Measurement uncertainty evaluation and representation3 Terms and definitionsThe following terms and definitions as defined in GB/T 5170.1-2016 apply to this document. For ease of use, the following is repeated Certain terms and definitions in GB/T 5170.1-2016. 3.1 Frequency indication error frequencyindicationerror The difference between the frequency indication value and the true value of the vibration generator system. 3.2 Scan sweep [Vibration Generator System] A process in which an independent variable (usually a frequency) continuously passes through a certain interval. 3.3 Scan rate sweeprate The rate of change of the independent variable (usually the frequency). [GB/T 5170.1-2016, definition 3.3.7] 3.4 Linear scan rate linearsweeprate The rate of change of the independent variable (usually the frequency) at the time of scanning is a constant scan rate, df/dt = constant. Note. where f is the frequency and t is the time. [GB/T 5170.1-2016, definition 3.3.8] 3.5 Logarithmic (frequency) scan rate logarithmic(frequency) sweeprate The rate of change per unit frequency is a constant scan rate, (df/f)/dt = constant. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5170.15-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 5170.15-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5170.15-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5170.15-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5170.15-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5170.15-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
