GB 5135.1-2019 English PDFUS$1239.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 5135.1-2019: Automatic sprinkler system -- Part 1: Sprinklers Status: Valid GB 5135.1: Historical versions
Basic dataStandard ID: GB 5135.1-2019 (GB5135.1-2019)Description (Translated English): Automatic sprinkler system -- Part 1: Sprinklers Sector / Industry: National Standard Classification of Chinese Standard: C84 Classification of International Standard: 13.220.10 Word Count Estimation: 62,625 Date of Issue: 2019-12-17 Date of Implementation: 2020-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 5135.1-2019: Automatic sprinkler system -- Part 1: Sprinklers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Automatic sprinkler systems.Part 1. Sprinklers) ICS 13.220.10 C84 National Standards of People's Republic of China Replaces GB 5135.1-2003, GB 5135.12-2006 Sprinkler system Part 1. sprinkler head Automaticsprinklersystem-Part 1. Sprinklers 2019-12-17 release 2020-07-01 implementation State Administration of Market Supervision Published by the National Standardization Management Committee ContentsForeword Ⅴ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Classification 2 4.1 Classification by Thermal Sensing Element 2 4.2 Classification by installation position 2 4.3 Classification by sprinkler sensitivity 2 4.4 Classification according to protected area 3 4.5 Special type sprinkler nozzle 3 5 Nominal flow coefficient, interface thread, color marking and model 5.1 Nominal flow coefficient and interface threads 3 5.2 Nominal operating temperature and color markings 4 5.3 Type 4 6 Requirement 5 6.1 Overall requirements 5 6.2 Interface thread 5 6.3 Appearance and signs 5 6.4 Sealing structure requirements 6 6.5 Hydrostatic seal and hydrostatic strength performance 6 6.6 Flow coefficient 6 6.7 Water distribution performance 6 6.8 Water spray above and below the splash tray 8 6.9 Static operating temperature 9 6.10 Function 9 6.11 Water shock resistance 9 6.12 Working load and frame strength 9 6.13 Strength of Thermal Sensing Elements 10 6.14 Splash tray strength 10 6.15 Fatigue Strength 10 6.16 Thermal Stability 10 6.17 Vibration resistance 10 6.18 Mechanical shock resistance 10 6.19 Anti-collision performance 10 6.20 Anti-rollover performance 10 6.21 Freezing Performance 11 6.22 High temperature resistance 11 6.23 Dynamic Thermal Performance 11 6.24 Stress corrosion resistance 11 6.25 Resistance to sulfur dioxide/carbon dioxide corrosion 12 6.26 Salt spray corrosion resistance 12 6.27 Resistance to moisture gas corrosion 12 6.28 Ambient temperature resistance 12 6.29 Side spraying 12 6.30 Performance of waterproof cover 12 6.31 Vacuum resistance 12 6.32 Wet wall performance 12 6.33 Fire performance 13 7 Test method 13 7.1 Visual inspection 13 7.2 Quality measurement 12 7.3 Hydraulic seal and hydraulic strength test 14 7.4 Measurement of flow coefficient 14 7.5 Water distribution test 15 7.6 Water spray test above and below the splash tray 7.7 Static operating temperature test 26 7.8 Functional test 27 7.9 Water shock test 28 7.10 Determination of working load and frame strength test 28 7.11 Strength test of heat-sensitive components 29 7.12 Splash tray strength test 29 7.13 Fatigue Strength Test 30 7.14 Thermal stability test 30 7.15 Vibration test 30 7.16 Mechanical shock test 30 7.17 Impact test 30 7.18 Tumble Test 31 7.19 Freezing test 31 7.20 High temperature test 32 7.21 Dynamic Thermal Test 32 7.22 Stress corrosion test 34 7.23 Sulfur dioxide/carbon dioxide corrosion test 36 7.24 Salt spray corrosion test 36 7.25 Moisture gas corrosion test 37 7.26 Ambient temperature test 37 7.27 Lateral spray test 37 7.28 Waterproof Cover Test 38 7.29 Vacuum test 39 7.30 Wet wall test 39 7.31 Fire test 39 8 Inspection rules 47 8.1 Type inspection 47 8.2 Factory inspection 49 8.3 Routine inspections 49 8.4 Confirmation Inspection 9 Operating Instructions 49 10 Packaging, transportation and storage 49 10.1 Packaging 10.2 Transport 49 10.3 Storage 49 Appendix A (Normative) Tolerance 52 Appendix B (Informative) Calculation Method for Glass Ball Breaking Load and Error Limit 53 Appendix C (Informative) Analysis of Strength Test of Fusible Components 55 Appendix D (Normative) Routine Inspection 56ForewordChapters 6 and 8 of this part are mandatory, the rest are recommended. GB 5135 "Sprinkler System" has or plans to release the following sections. --- Part 1. sprinkler head; --- Part 2. Wet alarm valve, retarder, hydraulic alarm bell; --- Part 3. water spray nozzle; --- Part 4. Dry-type alarm valve; --- Part 5. rain alarm valve; --- Part 6. General purpose valves; --- Part 7. water flow indicator; --- Part 8. accelerator; --- Part 9. Early suppression fast response (ESFR) sprinkler; --- Part 10. Pressure switch; --- Part 11. grooved pipe fittings; --- Part 13. Water curtain nozzle; --- Part 14. Pre-action device; --- Part 15. Household sprinklers; --- Part 16. Fire sprinkler hose; --- Part 17. Pressure reducing valve; --- Part 18. Fire Pipe Supports and Hangers; --- Part 19. Plastic pipes and fittings; --- Part 20. Coated steel pipes; --- Part 21. terminal water test device; --- Part 22. special application nozzle; This part is Part 1 of GB 5135. This section is drafted in accordance with the rules given in GB/T 1.1-2009. This section replaces GB 5135.1-2003 "Automatic sprinkler systems-Part 1. Sprinklers" and GB 5135.12-2006 " Dynamic sprinkler system Part 12. Spreading sprinkler heads to expand coverage, compared with GB 5135.1-2003, except for editorial changes The technical changes are as follows. --- Modified the scope (see Chapter 1, Chapter 1 of the.2003 edition); --- Deleted the classification according to the structural form (see 4.1 in the.2003 version); --- Modified the requirements for model preparation (see 5.3,.2003 version 5.3); --- Increased the nozzle quality deviation requirements and corresponding test methods (see 6.1.2 and 7.2); --- Increased sealing structure requirements (see 6.4); --- Modified the flow coefficient requirements (see 6.6,.2003 version 6.4); --- Increased water distribution performance requirements and corresponding test methods for pendant and upright sprinklers with nominal flow coefficients of 161 and 202 (see 6.7.2 and 7.5.2); --- Increased water distribution performance requirements and corresponding test methods for EC sprinklers (see 6.7.3, 7.5.3, and 7.5.4); --- Modified the static operating temperature requirements (see 6.9,.2003 version 6.7); --- Added functional requirements and corresponding test methods for EC sprinklers (see 6.10.3 and 7.8); --- Removed the requirements for low temperature resistance (see.2003 version 6.17); --- Increased anti-rollover performance requirements and corresponding test methods (see 6.20 and 7.18); --- Increased refrigeration performance requirements and corresponding test methods (see 6.21 and 7.19); --- Modified the dynamic thermal performance requirements and corresponding test methods of flush, embedded, concealed sprinklers (see 6.23.1 and 7.21.2,.2003 Annual versions 6.30 and 7.29); --- Increased requirements for resistance to stress corrosion of magnesium chloride and corresponding test methods (see 6.24.2 and 7.22.2); --- Added requirements for sulfur dioxide/carbon dioxide corrosion resistance and corresponding test methods (see 6.25 and 7.23); --- Increased the wet wall performance requirements and corresponding test methods for EC sprinklers (see 6.32 and 7.30); --- Added fire performance requirements and corresponding test methods (see 6.33.2 and 7.31.3); --- Modified the inspection rules (see Chapter 8, Chapter 8 of the.2003 edition); --- Added Appendix D (see Appendix D); --- Removed Appendix E (see Appendix E of the.2003 edition). This section refers to ISO 6182-1..2014 "Requirements and test methods for sprinklers of automatic sprinkler systems". This section is proposed and managed by the Ministry of Emergency Management of the People's Republic of China. This section was drafted by. Tianjin Fire Research Institute of Emergency Management Department, Shanghai Jindun Fire Safety Equipment Co., Ltd., Zhejiang Ruicheng Fire Equipment Equipment Co., Ltd. The main drafters of this section. Zhang Shaoyu, Tong Fengying, Li Yi, Li Qiang, Zhang Qiang, Zhang Zhongfei, Zhang Zhaoxian, Feng Wei, Wang Shuai, Malacca. The previous versions of the standard replaced by this section are. --- GB 5135-1985, GB 5135-1993, GB 5135.1-2003; --- GB 5135.12-2006. Sprinkler system Part 1. sprinkler head1 ScopeThis part of GB 5135 specifies the classification, nominal flow coefficient, interface threads, color markings, Model, requirements, test methods, inspection rules, instruction manuals, packaging, transportation, storage, etc. This section applies to sprinklers in sprinkler systems. This section does not apply to early suppression fast response (ESFR) sprinklers, household sprinklers, special application sprinklers and on-off sprinklers.2 Normative referencesThe following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 7306.2 55 ° sealed pipe threads. Part 2. Conical internal and external threads GB/T 31431-2015 Standard Combustion Materials for Class A Fire Tests of Fire Extinguishing Systems3 terms and definitionsThe following terms and definitions apply to this document. 3.1 Sprinkler sprinkler A device that sprinkles water in accordance with the designed sprinkler shape and volume. Note. Due to the effect of heat, it starts automatically within a predetermined temperature range. 3.2 Response time coefficient responsetime index; RTI A measure of the sprinkler's action sensitivity, the calculation formula is. RTI = τu0.5 Where. RTI --- response time coefficient, unit is (msec) 0.5 [(m · s) 0.5]; τ --- time constant of the thermal sensor, the unit is second (s); u --- gas flow rate in meters per second (m/s). 3.3 Standard orientation Position the airflow direction perpendicular to the sprinkler inlet axis and produce the shortest response time. Note. When the heat-sensitive element is symmetrical, the standard orientation is the orientation that makes the airflow direction perpendicular to both the axis of the sprinkler water flow and the plane where the yoke arm is located; When the heat-sensitive element is asymmetric, the standard orientation is to make the airflow direction perpendicular to both the axis of the sprinkler's water flow and the plane of its yoke arm. The heat sensitive element is in an orientation upstream of the airflow. 3.4 Worst-case orientation Orientation that makes the airflow direction perpendicular to the sprinkler inlet axis and produces the longest response time. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 5135.1-2019_English be delivered?Answer: Upon your order, we will start to translate GB 5135.1-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 5135.1-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB 5135.1-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 5135.1-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 5135.1-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
