GB 18068.2-2012 English PDFUS$199.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 18068.2-2012: [GB/T 18068.2-2012] Health protection zone for non-metallic mineral products industry -- Part 2: Lime industry Status: Obsolete
Basic dataStandard ID: GB 18068.2-2012 (GB18068.2-2012)Description (Translated English): [GB/T 18068.2-2012] Health protection zone for non-metallic mineral products industry -- Part 2: Lime industry Sector / Industry: National Standard Classification of Chinese Standard: C51 Classification of International Standard: 13.100 Word Count Estimation: 5,582 Older Standard (superseded by this standard): GB 18076-2000 Quoted Standard: GB/T 3840-1991 Regulation (derived from): National Standards Bulletin No. 13 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard applies to lime manufacturing enterprises and sensitive health protection distance required between the areas. This standard applies is located in the plains of lime manufacturing enterprises new construction, renovation, expansion p GB 18068.2-2012: [GB/T 18068.2-2012] Health protection zone for non-metallic mineral products industry -- Part 2: Lime industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Health protection zone for non-metallic mineral products industry.Part 2. Lime industry ICS 13.100 C51 National Standards of People's Republic of China Replacing GB 18076-2000 Non-metallic mineral products industry Health protection Part 2. Lime Manufacturing Part 2. Limeindustry Issued on. 2012-06-29 2012-08-01 implementation People's Republic of China Ministry of Health Standardization Administration of China released ForewordThis section 4.2,4.3,4.4 are recommended, the rest are mandatory. GB 18068 "non-metallic mineral products industry Health protection" is divided into eight sections. --- Part 1. cement manufacturing; --- Part 2. lime manufacturing; --- Part 3. Asbestos products industry; --- Part 4. graphite carbon products industry; --- Part 5. mica products industry; --- Part 6. ceramic products industry; --- Part 7. Glass fiber and products industry; --- Part 8. glass and glass products industry. This section GB 18068 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB 18076-2000 "lime plant health protection from the standards." This section of the main changes compared to GB 18076-2000 are as follows. --- Adjust the standard name, and according to GB/T 1.1-2009 "Standardization Guide Part 1. Standard structure and drafting" Adjust the structure of the standard; --- Amendments to the definition of health protection distance, increasing the sensitive area of complex terrain two terms and definitions; --- Revised the Health protection zone standard limits, and increase the scale of production sub-file; --- Increased requirements for greening. This part of the People's Republic of China Ministry of Health and focal points. This section is responsible for drafting units. China Center for Disease Control Environmental Health and Related Product Safety, Sichuan Provincial Disease Prevention and Control center. Participated in the drafting of this section. Mianzhu City Center for Disease Control and Prevention. The main drafters of this section. Jin Yinlong, Wen-Yong Zhang, Hongyan Feng, Shen Yuehua, Zhang Wei, Liu Ran, Wang Xiaoping, Yang Jijian, Meng Qingchun, Li, Chu Weizhong, Liu Bo. This part of the standard replaces the previous editions are. --- GB 18076-2000. Non-metallic mineral products industry Health protection Part 2. Lime Manufacturing1 ScopeGB 18068 provisions of this part of the health protection distance required between lime manufacturers and sensitive areas. This section applies to plain areas located in lime manufacturing enterprises in new construction, renovation, expansion project. Existing manufacturing companies may refer lime carried out.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3840-1991 development of local air pollutant emission standards of technical methods3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Health protection healthprotectionzone Factors adversely department (workshop or workplace) to the sensitive border zone boundary minimum distance. 3.2 Sensitive area sensitivearea Air pollution sensitive areas, including residential areas, schools and hospitals. 3.3 Complex terrain complicatedlandform Mountains, hills, coastal.4 index requirements4.1 lime manufacturing enterprises Health protection limits in Table 1. Table 1 lime manufacturing enterprises from the Health Protection Limit Production scale kt/a Location near five-year average wind speed m/s Health protection < 200 < 2400 2 ~ 4300 > 4200 Table 1 (continued) Production scale kt/a Location near five-year average wind speed m/s Health protection ≥200 < 2500 2 ~ 4400 > 4300 4.2 lime manufacturing method of determining the distance of Health Protection is located in complex terrain conditions, with reference to GB/T 7.6 in 3840-1991 Regulations. Location 4.3 lime manufacturing enterprises and sensitive areas, should consider the impact of factors such as wind direction and topography frequency to minimize its sensitive areas atmosphere Pollution of the environment. Enterprise 4.4 within the health protection distance range, densely planted trees plants green belt (width less than 10m), and according to health 90% protection from the standard limit of execution. Attention to the selection of species resistant characteristics of pollutants or adsorption characteristics. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 18068.2-2012_English be delivered?Answer: Upon your order, we will start to translate GB 18068.2-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 18068.2-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB 18068.2-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
