GB/T 16774-2012 English PDFUS$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16774-2012: Auto-boosting caliber liquid nitrogen container Status: Valid GB/T 16774: Historical versions
Basic dataStandard ID: GB/T 16774-2012 (GB/T16774-2012)Description (Translated English): Auto-boosting caliber liquid nitrogen container Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B90 Classification of International Standard: 23.020 Word Count Estimation: 14,160 Older Standard (superseded by this standard): GB 16774-1997 Quoted Standard: GB 150.1; GB 150.2; GB 150.3; GB/T 191-2008; GB 567.1; GB 567.2; GB 567.3; GB/T 1226-2010; GB/T 3198-2010; GB/T 3280-2007; GB/T 12241-2005; GB/T 13550-1992; GB/T 14976-2012; GB/T 16958-2008; GB/T 18442.3; GB/T 18443.2; GB/T 18443.3; GB/T 18443.5; GB/T 184 Regulation (derived from): National Standards Bulletin No. 42 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the austenitic stainless steel self-pressurized liquid nitrogen containers (hereinafter referred to as self-pressurized containers) product classification, technical requirements, test methods, inspection rules, marking, packaging GB/T 16774-2012: Auto-boosting caliber liquid nitrogen container---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS23.020 B90 National Standards of People's Republic of China Replacing GB 16774-1997 Liquid nitrogen from the pressurized container Issued on. 2012-12-31 2013-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordRules of the criteria based on GB/T 1.1-2009 given draft. This standard replaces GB 16774-1997, compared with GB 16774-1997, mainly for the following changes. --- Scope increased operating pressure and volume range of requirements; --- Increasing the NA range; --- Increased Chapter 3, "Terms and Definitions"; --- The original "1 vertical self-pressurized liquid nitrogen containers schematic shape" and "2 horizontal self-pressurized liquid nitrogen containers schematic shape" with And "2 horizontal self-pressurized container structure diagram" "Figure 1 Schematic diagram of the vessel is pressurized from vertical"; --- Original Chapter 3, "Models and Specifications" to Chapter 4, "category", and the original table 1 is adjusted to Appendix A (informative) "from pressurized containers Main models and specifications "; --- Increased 5.3 "design" requirements; --- Canceled a 4.4 "technology requirements" and 4.5 "appearance requirements" requirements; --- An increase of 5.4 "made" requirement; --- Canceled a 5.4 "transportation test" requirements. This standard by the National Standardization Technical Committee of the boiler pressure vessel (SAC/TC262) and focal points. This standard is mainly drafted by. Leshan City in East Asia Electrical and Mechanical Services Ltd., Shanghai Gas Industry Association, Shanghai Jiaotong University, Shenyang new Limited light cryogenic containers Ltd., Chengdu Golden Phoenix Liquid Nitrogen Container Co., Ltd., China Special Equipment Inspection and Research Institute, Shanghai Huayi Equipment Engineering The company, the State Quality Supervision and Inspection Center cryogenic vessels, Shanghai Institute of Special Equipment Inspection. The main drafters of this standard. Liu Yuanming, in Tong, Luxue Sheng, Wei-Ming Zhou, Chen Zhaohui, Weiyong Biao, Fan Yan, Li Zongji, Teng Junhua, Cao Zhiming, Wen Yonggang. This standard replaces the standards previously issued as follows. --- GB 16774-1997. Liquid nitrogen from the pressurized container1 Scope1.1 standard austenitic stainless steel liquid nitrogen from the pressurized vessel (hereinafter referred to as self-pressurized containers) product classification, technical requirements, Test methods, inspection rules, marking, packaging and storage requirements. 1.2 This standard applies to storage medium is liquid nitrogen, working pressure is less than 0.1MPa, the effective volume of 50L ~ 800L, and the use of high vacuum Design of multi-layer insulation self-pressurized containers, manufacturing. 1.3 This standard does not apply to the following ranges from pressurized containers. --- With pressure storage of liquid nitrogen; --- Other cryogenic liquid oxygen storage and so on.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB 150.1 pressure vessels - Part 1. General requirements GB 150.2 pressure vessels - Part 2. Materials GB 150.3 pressure vessels - Part 3. Design GB/T 191-2008 packaging Pictorial marking Part 1 GB 567.1 bursting disc safety device. Basic requirements Part 2 GB 567.2 bursting disc safety devices. application, selection and installation Part 3 GB 567.3 bursting disc safety devices. Classification and mounting dimensions GB/T 1226-2010 general pressure gauges GB/T 3198-2010 aluminum and aluminum foil GB/T 3280-2007 cold-rolled stainless steel sheet and strip GB/T 12241-2005 general requirements for safety valves GB/T 13550-1992 5A molecular sieve and test methods GB/T 14976-2012 transmission fluid with stainless steel seamless pipe GB/T 16958-2008 biaxially oriented polyester film for packaging GB/T 18442.3 fixed vacuum insulation cryogenic pressure vessels - Part 3. Design GB/T 18443.2 vacuum insulation cryogenic device performance test methods - Part 2. Vacuum Measurement GB/T 18443.3 vacuum insulation cryogenic device performance test methods - Part 3. leak rate measurement GB/T 18443.5 vacuum insulation cryogenic device performance test methods - Part 5. Static evaporation rate measurement GB/T 18443.8 vacuum insulation cryogenic device performance test methods - Part 8. volume measurement GB 24511-2009 pressure equipment with stainless steel sheet and strip HG/T2690-1995 13X molecular sieves NB/T47014 pressure equipment welding procedure qualification ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16774-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 16774-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16774-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16774-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16774-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16774-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
