GA/T 2008-2022 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GA/T 2008-2022: (Forensic Science Firearms Inspection Specifications)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA/T 2008-2022	199	Add to Cart	3 days	(Forensic Science Firearms Inspection Specifications)	Valid

Similar standards

GA/T 1788.2   GA/T 1711   GA/T 424   GA/T 2012   GA/T 2013   GA/T 2011   

Basic data

Standard ID: GA/T 2008-2022 (GA/T2008-2022)
Description (Translated English): (Forensic Science Firearms Inspection Specifications)
Sector / Industry: Public Security (Police) Industry Standard (Recommended)
Classification of Chinese Standard: A92
Classification of International Standard: 13.310
Word Count Estimation: 8,844
Date of Issue: 2022-10-07
Date of Implementation: 2023-01-01
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the inspection objects, equipment and experimental sites, inspection methods, identification conditions, operating procedures, identification opinions, etc. of firearm inspection in the field of forensic science. This standard applies to firearms inspections in the field of forensic science.

GA/T 2008-2022: (Forensic Science Firearms Inspection Specifications)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13.310 CCSA92 People's Republic of China Public Security Industry Standards Forensic Science Firearms Inspection Technical Specifications Released on 2022-10-07 2023-01-01 Implementation Released by the Ministry of Public Security of the People's Republic of China

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. Please note that some contents of this document may refer to patents. Publishing of this document The Agency assumes no responsibility for identifying patents. This document is submitted by the Criminal Investigation Bureau of the Ministry of Public Security of the People's Republic of China. This document is under the jurisdiction of the National Criminal Technology Standardization Technical Committee Trace Inspection Sub-Technical Committee (SAC/TC179/SC9). This document was drafted by. The Physical Evidence Appraisal Center of the Ministry of Public Security, the Physical Evidence Appraisal Center of the Hunan Provincial Public Security Bureau, and the Seven Branches of the Criminal Investigation Team of the Beijing Municipal Public Security Bureau Team, Jilin Provincial Public Security Bureau Physical Evidence Identification Center, Jiangsu Provincial Public Security Department Physical Evidence Identification Center, Nanjing Public Security Bureau Criminal Science and Technology Research Institute, Zibo Criminal Division of Municipal Public Security Bureau, Bengbu Public Security Bureau, Criminal Division of Handan Public Security Bureau, Criminal Division of Shangqiu Public Security Bureau, Criminal Division of Xiangtan Public Security Bureau, Tongren City Public Security Judicial Identification Center, Dongguan City Public Security Bureau Criminal Police Detachment. The main drafters of this document. Li Yiyi, Chen Dongming, Deng Xulong, Zhou Bingru, Chen Chaoyou, Ren Boyuan, Wang Yu, Li Xiangnan, Liu Deng, Xie Bing, Wang Jinfeng, Zhao Yanyan, Gong Qi, Feng Tao. Forensic Science Firearms Inspection Technical Specifications

1 Scope

This document specifies the inspection objects, equipment and experimental sites, inspection methods, identification conditions, and operation steps of firearm inspection in the field of forensic science. procedures, appraisal opinions, etc. This document applies to firearms inspections in the field of forensic science.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 23865 Proportional Photography Rules GB/T 29352 Rules for photographic and video recording of physical evidence examination GA/T 953 Forensic science muzzle specific kinetic energy velocimetry test procedures GA/T 1506-2018 Forensic Science Bulletmark Inspection Terminology

3 Terms and Definitions

The terms and definitions defined in GA/T 1506-2018 apply to this document. 3.1 Standard gun factorygun After being designed and finalized, the guns are mass-produced by legal manufacturers according to certain technical indicators and put into equipment or market. [Source. GA/T 1506-2018, 2.2] 3.2 Non-standard firearms non-factorygun Firearms that are illegally manufactured without following certain technical specifications. [Source. GA/T 1506-2018, 2.3]

4 Inspection object

Suspected firearms with main structures such as barrels, receivers, firing mechanisms, and firing mechanisms, and with a caliber of less than 20mm.

5 Equipment and Experimental Site

5.1 Equipment Vernier caliper (accuracy not less than 0.02mm), steel ruler (accuracy not less than 1mm), tape measure (accuracy not less than 1mm), balance (accuracy not less than 1mm) Not less than 0.1g), bullet speedometer, camera, remake frame, light source, etc. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA/T 2008-2022_English be delivered?

Answer: Upon your order, we will start to translate GA/T 2008-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA/T 2008-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GA/T 2008-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.