GA/T 1735.1-2020 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA/T 1735.1-2020	RFQ	ASK	11 days	Technical specifications of inspection tools for cybersecurity classified protection - Part 1: General safety inspection tools	Valid

Similar standards

GM/T 0130   GM/T 0124   GA/T 1389   GA/T 1537   GA/T 1538   GA/T 1536   

Basic data

Standard ID: GA/T 1735.1-2020 (GA/T1735.1-2020)
Description (Translated English): Technical specifications of inspection tools for cybersecurity classified protection - Part 1: General safety inspection tools
Sector / Industry: Public Security (Police) Industry Standard (Recommended)
Classification of Chinese Standard: L80
Classification of International Standard: 35.040
Word Count Estimation: 110,155
Date of Issue: 2020-08-04
Date of Implementation: 2020-12-01
Issuing agency(ies): Ministry of Public Security

GA/T 1735.1-2020: Technical specifications of inspection tools for cybersecurity classified protection - Part 1: General safety inspection tools

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical specifications of inspection tools for cybersecurity classified protection - Part 1.General safety inspection tools ICS 35.040 L80 Public Safety Industry Standards of the People's Republic of China Technical specifications for network security grade protection inspection tools Part 1.Safety General Inspection Tool Technical specifications of inspection tools for cybersecurity classified protection-Part 1. General safety inspection tools Released on 2020-08-04 Implemented on 2020-12-01 Issued by the Ministry of Public Security of the People's Republic of China

Table of contents

Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 1 3.1 Terms and definitions 1 3.2 Abbreviations 2 4 General requirements 3 4.1 Inspection tool design principles 3 4.2 Composition of inspection tools 3 4.3 Upgrade and interface requirements 5 5 Functional requirements 5 5.1 Tool management system function 5 5.2 General safety requirements check tool function 13 5.3 Optional inspection tool function 20 5.4 Functions of auxiliary inspection equipment 22 6 Interface requirements 23 6.1 Tool management system interface requirements 23 6.2 Checking tool interface requirements 27 7 Performance requirements 27 7.1 Tool Management System Performance 27 7.2 General safety requirements check tool performance 27 7.3 Optional inspection tool performance 29 8 Safety requirements 31 8.1 Tool Management System Security 31 8.2 U port inspection tool safety 34 8.3 Network port check tool security 34 8.4 Security of wireless WIFI inspection tool 35 9 Compatibility requirements 35

Appendix A

(Normative appendix) Inspection indicators of party and government agencies and industry authorities 36

Appendix B

(Normative appendix) Inspection index of filing unit 40

Appendix C

(Normative appendix) General safety requirements inspection index 43 C.1 First-level safety general requirements inspection index 43 C.2 General requirements inspection index for the second level of safety 47 C.3 General requirements inspection indicators for the third level of security (including critical information infrastructure) 56 C.4 Level 4 security general requirements inspection indicators (including critical information infrastructure) 70

Appendix D

(Normative appendix) Government website security inspection indicators 87 D.1 Government website security inspection indicators 87 D.2 Check content of government website vulnerabilities 90

Appendix E

(Normative appendix) Overall architecture of network security grade protection inspection tool 91 E.1 The overall structure of the inspection tool 91 E.2 The relationship between the inspection tool and the basic database management system of important information systems 91

Appendix F

(Normative appendix) Overview of safety inspection workflow 93

Appendix G

(Informative appendix) Inspection tool specification requirements 95 G.1 Specification requirements for special tools for grade protection inspection 95 G.2 Specification requirements for auxiliary inspection equipment 100 References 103

Foreword

GA/T 1753 "Technical Specification for Cyber Security Graded Protection Inspection Tools" has or plans to publish the following parts. ---Part 1.General safety inspection tools; ---Part 2.Industrial control system inspection tools; ---Part 3.Emergency response tools; This part is GA/T Part 1 of 1753. This part is in accordance with GB/T Drafting of the rules given in 1.1-2009. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This part was proposed by the Cyber Security Bureau of the Ministry of Public Security. This part is under the jurisdiction of the Information System Security Standardization Technical Committee of the Ministry of Public Security. Drafting units of this section. Cyber Security Bureau of the Ministry of Public Security, the Third Research Institute of the Ministry of Public Security. The main drafters of this section. Guo Qiquan, Fan Chunling, Zhu Guobang, Tao Yuan, Li Moyan, Guo Fengming, Zhang Yuxiang, Luo Zheng, Zheng Guogang, Ma Siyuan. Technical specifications for network security grade protection inspection tools Part 1.Safety General Inspection Tool

1 Scope

GA/T This part of 1753 stipulates the technology of inspection tools equipped by public security organs to carry out network security grade protection inspections. specification. This section applies to the development, design, testing, and use of network security level protection inspection tools (hereinafter referred to as "inspection tools"). The work of the festival is conducive to improving the standardization and standardization of the network security level protection work.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB 17859 Computer Information System Security Protection Grade Classification Guidelines GB/T 22239 Information Security Technology Network Security Level Protection Basic Requirements GB/T 25069-2010 Information Security Technical Terms GA /WA 1001-2013 Network Security Data Element Set GA /WA 1002-2013 Network Security Data Element Code Set 3 Terms, definitions and abbreviations 3.1 Terms and definitions GB 17859, GB/T 22239 and GB/T The terms and definitions defined in 25069-2010 and the following apply to this document. 3.1.1 Network security level protection check tool inspection tool for cybersecurity classified protection The public security organs carry out network security inspections, with functions such as standard inspections, tool calls, and results display, and integrate customized special security Inspection tools to provide professional inspection knowledge and inspection methods for public security organs’ cybersecurity law enforcement inspections, and to achieve correlation analysis of acquired data Integrated special portable inspection equipment with functions such as analysis, statistical comparison, and processing circulation. 3.1.2 Network security level protection inspection special tool special inspection tool for cybersecurity classified protection It is composed of a network security level protection inspection tool management system, an inspection index library, an inspection knowledge base and a technical inspection tool library, etc. equipment. 3.1.3 U port inspection tool inspection tool of USB port An inspection tool connected to the inspection object through a dedicated USB interface. 3.1.4 Network port check tool inspection tool of network port An inspection tool connected to the inspection object through a network interface. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA/T 1735.1-2020_English be delivered?

Answer: Upon your order, we will start to translate GA/T 1735.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 7 ~ 11 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA/T 1735.1-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GA/T 1735.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.