GA 138-2010 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA 138-2010	RFQ	ASK	3 days	Fire axes	Obsolete
GA 138-1996	319	Add to Cart	3 days	Fire axes	Obsolete

Similar standards

GB 4351   GA 602   GB 4066.2   GA 999   

Basic data

Standard ID: GA 138-2010 (GA138-2010)
Description (Translated English): Fire axes
Sector / Industry: Public Security (Police) Industry Standard
Classification of Chinese Standard: C84
Issuing agency(ies): Ministry of Public Security

GA 138-2010: Fire axes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fire axes ICS 13.220.10 C84 People's Republic of China Public Security Industry Standards Replacing GA 138-1996 Fire ax Issued on. 2010-02-09 2010-03-01 implementation People's Republic of China Ministry of Public Security

Foreword

4,6 this standard are mandatory, the rest are recommended. This standard replaces GA 138-1996 "fireman's ax." This standard compared with GA 138-1996, the main changes are as follows. --- Ax uses material from the "steel" to "metal material" (1996 version 4.1.1, this version 4.1.1); --- Rally by the "15000N" subdivided into "12500N" and "20000N" two kinds (1996 version 4.7, this version 4.7); --- Increased "resistance to salt spray corrosion of metallic materials" requirement (edition 4.10); --- A reference to the standard version has been updated. This standard was proposed by the Ministry of Public Security Fire Department. This standard by the National Standardization Technical Committee appliances Fire Fire accessories Technical Committee (SAC/TC113/SC5) centralized. This standard was drafted. Shanghai Fire Research Institute of Ministry of Public Security. The main drafters of this standard. Shi Wei, FU Jian bridge, Nguyen Zhen, Li Baozhong. This standard replaces the standards previously issued as follows. --- GA 138-1996. Fire ax

1 Scope

This standard specifies the fire ax product classification, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to rescue fire rescue job by flat fire ax, fire sharp ax, ax does not apply to fire back.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 230.1-2009 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T scale) (ISO 6508-1.2005, MOD) GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance tolerance (eqv ISO 2768-1. 1989) GB/T 1931-2009 wood moisture content determination method (ISO 3130. 1975, MOD) GB/T 6060.2-2006 surface roughness comparison specimens grinding, turning, boring, milling, shaped and planed surfaces (ISO 2632-1. 1985, MOD) GB/T 6461-2002 metal base metal and other inorganic coatings by etching after the test specimens and ratings (ISO 10289.1999, IDT) GB/T 8389-2003 Gang Fu general technical conditions (DIN7287. 1976, NEQ) GB/T 10125-1997 Corrosion tests in artificial atmospheres - salt spray test (eqv ISO 9227.1990) GB J107 Concrete Strength Inspection and Evaluation Standards

3 Product Categories

3.1 Classification 3.1.1 Fire ax Fire flat sub ax, sharp ax two kinds of fire. 3.1.2 Fire ax flat shape shown in Figure 1. 3.1.3 fire sharp ax shape shown in Figure 2. 1 --- ax; 2 --- the handle; 3 --- ax blade; 4 --- ax hole; 5 --- ax top; A --- ax long; B --- ax Dingkuan; C --- ax top thick; F --- ax blade width; H --- hole; L --- ax full length.

1 Fire ax flat shape schematic diagram

......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA 138-2010_English be delivered?

Answer: Upon your order, we will start to translate GA 138-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA 138-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GA 138-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GA 138-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GA 138-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.