FZ/T 97034-2014 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 97034-2014: General technical requirements for needle bed bases of flat knitting machines Status: Valid
Basic dataStandard ID: FZ/T 97034-2014 (FZ/T97034-2014)Description (Translated English): General technical requirements for needle bed bases of flat knitting machines Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W96 Classification of International Standard: 59.120.40 Word Count Estimation: 7,769 Date of Issue: 10/14/2014 Date of Implementation: 4/1/2015 Quoted Standard: GB/T 700; GB/T 1348; GB/T 9439 Regulation (derived from): People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This Standard specifies the basic parameters and types, technical requirements, test methods, inspection rules flat knitting machine needle bed bases. This Standard applies to nominal width of 13 cm/5 ~ 280 cm/110, made of cast iron or carbon steel flat k FZ/T 97034-2014: General technical requirements for needle bed bases of flat knitting machines---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.General technical requirements for needle bed bases of flat knitting machines ICS 59.120.40 W96 People's Republic of China textile industry standards Bed flat knitting machine needle holder General technical conditions Issued on. 2014-10-14 2015-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories (SAC/TC215) centralized. This standard was drafted. Changshu City of Light Machinery Co., Ltd., Zhangjiagang City Condor Electrical Technology Co., Xin Feng Zhangjiagang City of Phoenix Machinery Factory, Fujian TAIFAN Industrial Co., Ltd. Zhejiang Hysen Textile Machinery Co., Ltd., Jiang Su Zhongjie Electric Co., Ltd., science and technology have Tiger Limited Cixi Sun State Textile Technology Co., Hengqiang Technology Co., Ltd., China Textile Machinery Association. The main drafters of this standard. Guzhen Gang, Zhang Jianxin, Xu Bin, Ms. Li, Shi Haibin, Ding Weiming RECONSIDERATION mountains, Luo Haisheng, Chen Wenjun, Gu Wenjie, Liu Zheng. Bed flat knitting machine needle holder General technical conditions1 ScopeThis standard specifies the basic parameters and types, technical requirements, test methods, inspection rules flat knitting machine needle bed bases. This standard applies to the nominal width of 13cm/5 ~ 280cm/110, made of cast iron or carbon steel flat knitting machine, computer knitting Bed knitting machine with a needle holder. Other knitting machine needle bed base can also use the reference standard.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 700 carbon structural steel GB/T 1348 Ductile Iron GB/T 9439 Gray Iron Castings3 basic parameters and type3.1 Basic parameters 3.1.1 nominal width Needle bed bases nominal width shown in Table 1. Table 1 Item Parameter Value Nominal width 13cm/5,16cm/6,33cm/13,40cm/16,61cm/24,81cm/32,91cm/36,97cm/38,102cm/40,106cm/42, 114cm/45,122cm/48,132cm/52,137cm/54,142cm/56,147cm/58,152cm/60,157cm/62,163cm/64, 173cm/68,183cm/72,203cm/80,229cm/90,254cm/100,280cm/110 Note 1. The nominal width is expressed as "nominal width/codename"; well above the slash is in centimeters, said width value is below the diagonal inches nominal width Code. Note 2. The nominal value represented by the width of the effective working width of the needle bed. Note 3. The actual size of the needle bed bases nominal width dimension plus other device size. 3.1.2 angle Needle bed seat angle of 100 °, 97 °, 98 °, where 100 ° is preferred. 3.2 Type 3.2.1 integrated and modular. 3.2.2 integrated cast iron pieces; combined into welded structure, bolt connection type structure. ...... |
