FZ/T 93045-2018 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93045-2018: Lap winder
Status: Valid

FZ/T 93045: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 93045-2018	229	Add to Cart	3 days	Lap winder	Valid
FZ/T 93045-2009	239	Add to Cart	3 days	Lap formers	Obsolete
FZ/T 93045-1997	319	Add to Cart	3 days	Sliver doubling machine	Obsolete

Similar standards

FZ/T 93048.1   FZ/T 93019   FZ/T 93048.3   FZ/T 93047   FZ/T 93043   

Basic data

Standard ID: FZ/T 93045-2018 (FZ/T93045-2018)
Description (Translated English): Lap winder
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W93
Classification of International Standard: 59.120.10
Word Count Estimation: 10,153
Date of Issue: 2018-10-22
Date of Implementation: 2019-04-01
Older Standard (superseded by this standard): FZ/T 93045-2009
Regulation (derived from): Ministry of Industry and Information Technology Announcement No. 54 of 2018
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the basic parameters, requirements, test methods, inspection rules, signs and packaging, transportation and storage of the strip winder. This standard applies to the stripping machine for the cotton combing process.

FZ/T 93045-2018: Lap winder

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Iron-aluminum intermetallic compound porous membrane material) ICS 59.120.10 W93 People's Republic of China Textile Industry Standard Replace FZ/T 93045-2009 Strip and roll machine Lapwinder Published on.2018-10-22 Implementation of.2019-04-01 Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 93045-2009 "Rolling and Rolling Machine". The main technical changes compared to FZ/T 93045-2009 are as follows. --- Added reference documents GB/T 17780.2-2012 Textile machinery safety requirements Part 2. Spinning preparation and spinning mechanical; --- Adjusted the basic parameters (see Table 1); --- Increase safety protection requirements (see 4.8); ---Specification of the test method for the unevenness of the lap (see 5.1.10); --- Modified the test conditions (see 5.2.1.2). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the China National Textile and Apparel Council. This standard is sub-technical committee of spinning, dyeing and finishing machinery of the National Textile Machinery and Accessories Standardization Technical Committee (SAC/TC215/SC1) Return to the mouth. This standard was drafted. Jiangsu Kaigong Machinery Co., Ltd., National Textile Machinery Quality Supervision and Inspection Center, Shanxi Best Machinery Manufacturing Co., Ltd., Pacific Electromechanical Group (Shanghai) Technology Co., Ltd., Shaanxi Baocheng Aviation Precision Manufacturing Co., Ltd. The main drafters of this standard. Zhang Libin, Shen Yulan, Zhang Lixin, Ma Cong, Lu Hangyuan, Peng Baozhen. The previous versions of the standards replaced by this standard are. ---FZ/T 93045-1997, FZ/T 93045-2009. Strip and roll machine

1 Scope

This standard specifies the basic parameters, requirements, test methods, inspection rules, signs and packaging, transportation and storage of the strip winder. This standard applies to the stripping machine for the cotton combing process.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB 2894 safety signs and guidelines for their use GB 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions GB/T 7111.2 Specification for noise testing of textile machinery - Part 2. Preparations for spinning and spinning machinery GB/T 17780.2-2012 Textile machinery - Safety requirements - Part 2. Spinning preparation and spinning machines FZ/T 90001 Textile Machinery Product Packaging FZ/T 90074 Textile Machinery Product Coating FZ/T 90089.1 Textile machinery nameplate type, size and technical requirements FZ/T 90089.2 Textile machinery nameplate content FZ/T 90110-2013 Textile Machinery General Project Quality Inspection Specification JB/T 5967-2007 Air medium quality grade for pneumatic parts and systems

3 basic parameters

See Table 1. Table 1 Project parameters Tampons combined number/root 18~32 Tampon quantitative/ktex 2.5~6 Measure of cotton lap/ktex ≤ 85 Cotton roll diameter/mm ≤ 650 Quilt width/mm 300 Can diameter 600,1000 Rolling speed/(m/min) 80 ~ 230 Total drafting ratio 1~3.3 Number of drafting heads 2 Winding type roller, flat belt ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 93045-2018_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 93045-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 93045-2018_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 93045-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 93045-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 93045-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.