FZ/T 92066-2010 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 92066-2010: General specification for compensator device
Status: Valid

FZ/T 92066: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 92066-2010	149	Add to Cart	2 days	General specification for compensator device	Valid
FZ/T 92066-1998	319	Add to Cart	3 days	General specification for compensator device	Obsolete

Similar standards

FZ/T 93048.1   FZ/T 93019   FZ/T 92059   FZ/T 92067   FZ/T 92061   

Basic data

Standard ID: FZ/T 92066-2010 (FZ/T92066-2010)
Description (Translated English): General specification for compensator device
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W95
Classification of International Standard: 59.120.50
Word Count Estimation: 5,568
Date of Issue: 2010-12-29
Date of Implementation: 2011-04-01
Older Standard (superseded by this standard): FZ/T 92066-1998
Quoted Standard: GB/T 22801; FZ/T 90074
Regulation (derived from): Engineering (2010) No. 134
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the carbon steel pressure into the hole of the type, size, technical requirements and related restrictions. This standard applies to no impact on the working pressure is less than 0. 07MPa, operating temperature is 0 ~ 250��C atmospheric pressure into the hole.

FZ/T 92066-2010: General specification for compensator device

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for compensator device ICS 59.120.50 W95 People's Republic of China textile industry standards Replacing FZ/T 92066-1998 Dancers devices General Issued on. 2010-12-29 2011-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

Instead of the standard FZ/T 92066-1998 "dancers devices General." This standard FZ/T 92066-1998 compared to the main changes are as follows. --- Adjustment and classification parameters; --- Improve the installation guide roller surface parallel to the base of the guide roller and the level of degree requirements. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Zhangjiagang City Jianye Dyeing Machinery Co., Ltd., Jinjiang City, Ji Long Machinery Industrial Co., Ltd. Jiangsu red Dyeing Machinery Co., Ltd., Wuxi Textile Machinery Research Institute. The main drafters of this standard. Chen Jianrong, Li Gang, Zhang Yong, Zhang Yiqun, Li Liping. This standard replaces the standards previously issued as follows. --- FZ/T 92066-1998. Dancers devices General

1 Scope

This standard specifies the classification dancers device parameters, requirements and test methods. This standard applies to adjust the width of fabric and yarn between the drive unit or related speed difference of dyeing and finishing machinery generic device.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 22801 Textile dyeing and finishing machinery and machine guide roller main dimensions and requirements FZ/T 90074 textile machinery products Painting

3 Categories and Parameters

3.1 Classification 3.1.1 by structure type. Vertical, swing. 3.1.2 Press counterbalance in the form of. weight balance, pneumatic balanced. 3.2 Parameter Table 1. Table 1 millimeters Project Parameters Nominal width (B) 1400,1600,1800,2000,2200,2400,2600,2800,3000,3200,3400,3600 Bearing installation center distance (L) L = B 200,300,400,500

4 Requirements

4.1 dancers change the fabric tension should be responsive, adjusting the position of the action should be smooth. 4.2 dancers pneumatic cylinder pressure should be stable, no leakage pipeline. 4.3 detector responsive and reliable. 4.4 guide roller shall comply with GB/T 22801 of. 4.5 Each guide roller rotating flexible, smooth. 4.6 installation guide roller surface parallelism tolerance baseline 0.5mm. Tolerance levels guide roller surface 4.7 0.5/1000. 4.8 adjacent parallel 0.5mm tolerance between the guide rollers. 4.9 coating products shall comply FZ/T 90074 of.

5 Test methods

5.1 installation guide roller surface parallel to the baseline of (4.6), with a hammer hanging wire was detected. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 92066-2010_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 92066-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 92066-2010_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 92066-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 92066-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92066-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.