FZ/T 90060.6-2005 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 90060.6-2005: Textile machinery. Product drawing and design document. Part 6: Integrality Status: Valid
Basic dataStandard ID: FZ/T 90060.6-2005 (FZ/T90060.6-2005)Description (Translated English): Textile machinery. Product drawing and design document. Part 6: Integrality Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W90 Classification of International Standard: 59.120 Word Count Estimation: 6,672 Date of Issue: 2005-05-18 Date of Implementation: 2006-01-01 Older Standard (superseded by this standard): FZ/T 90065-1995 Quoted Standard: FZ/T 90060.1; FZ/T 90060.3; FZ/T 90060.4; FZ/T 90060.5 Regulation (derived from): NDRC Notice No. 24 of 2005 Issuing agency(ies): National Development and Reform Commission, People Republic of China Summary: This standard specifies the textile machinery drawings and design documents, including CAD drawings and design documents integrity requirements. This section applies to the control of the machinery industry product design and design documents, including CAD file integrity requirements. Other product drawing and design file integrity can also be implemented by reference. FZ/T 90060.6-2005: Textile machinery. Product drawing and design document. Part 6: Integrality---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Textile machinery.Product drawing and design document.Part 6. Integrality ICS 59.120 W90 People's Republic of China Textile Industry Standard Replace FZ/T 90065-1995 Textile machinery product drawings and design documents Part 6. Integrity Released on.2005-05-18 2006-01-01 implementation National Development and Reform Commission of the People's Republic of China ForewordFZ/T 90060 includes the following nine parts under the general title of "Textile Machinery Product Drawings and Design Documents". --- Part 1. General; --- Part 2. Numbering; --- Part 3. Requirements for drawings; --- Part 4. Requirements for design documents; --- Part 5. Format; --- Part 6. Integrity; --- Part 7. Change; --- Part 8. Standardization review; --- Part 9. Management. This part is part 6 of the FZ/T 90060. This part is based on the needs of enterprises to implement computer-aided design (CAD) and enterprise quality management system and product market competition. According to relevant national standards and industry standards, the characteristics of the textile machinery industry have been fully considered. In the original FZ/T 90065-1995 "Textile machinery production Revised on the basis of the integrity of the product drawings and design documents. This part replaces FZ/T 90065-1995 "Integrity of textile machinery product drawings and design documents". Main difference from the original standard as follows. ---The standard name was changed from "Integrity of textile machinery product drawings and design documents" to "Textile machinery product drawings and design texts" Part 6. Integrity"; --- Increased the division of product decision-making, design, trial production, and production; --- Coordinated the additions and deletions of other parts of this standard. This part was proposed by the China Textile Industry Association. This part is under the jurisdiction of the National Textile Machinery and Accessories Standardization Technical Committee. This section is mainly drafted by. China Textile Machinery Research Institute, Zhengzhou Textile Machinery Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Jingwei Textile Machinery Co., Ltd., China Textile Machinery (Group) Co., Ltd., Best Machinery Manufacturing Co., Ltd. The main drafters of this section. Huang Hongkang, Yan Guohong, Lin Jian, Shen Yingquan, Zhao Guanhong, Xu Jinglu. Textile machinery product drawings and design documents Part 6. Integrity1 ScopeThis part of FZ/T 90060 specifies the textile machinery product drawings and design documents, including the integrity of CAD drawings and design documents. Claim. This section applies to the textile machinery industry product drawings and design documents, including the integrity requirements of CAD documents. Other product drawings And the integrity of the design file can also be referred to implementation.2 Normative referencesThe provisions in the following documents become the provisions of this part by reference to this part of FZ/T 90060. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section. FZ/T 90060.1 Textile machinery product drawings and design documents - Part 1. General FZ/T 90060.3 Textile machinery product drawings and design documents - Part 3 FZ/T 90060.4 Textile machinery product drawings and design documents - Part 4. Requirements for design documents FZ/T 90060.5 Textile machinery product drawings and design documents - Part 5. Format3 Terms and definitionsThe terms and definitions established by FZ/T 90060.1 apply to this part of FZ/T 90060.4 Product drawings and design file integrity4.1 Products should have corresponding product drawings and design documents at all stages of development decision-making, design, trial production, appraisal, and formal production. Drawing and The requirements and format of the design documents are in accordance with FZ/T 90060.3, FZ/T 90060.4 and FZ/T 90060.5 respectively. 4.2 According to the product type, complexity, structural characteristics, batch size, determine the specific situation according to the contents of Table 1. Self-developed Products are divided into two cases, basic products or bulk products (1), variant products or small batch products (2); special contract products are divided into two types Situation, simple product (3), complex product or joint machine (4). 4.3 Market forecast reports and research reports can be combined when needed. 4.4 The product manual generally includes electrical commissioning instructions. The mechanical and electrical parts can also be prepared separately when required. 4.5 The following drawings and documents can be combined. a) the same pattern and documents of the same series of products; b) pattern catalog and file directory; c) a summary table of purchased parts and a summary table of standard parts; d) Other simple product files. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 90060.6-2005_English be delivered?Answer: Upon your order, we will start to translate FZ/T 90060.6-2005_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 90060.6-2005_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 90060.6-2005_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
