FZ/T 90060.4-2005 English PDFUS$339.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 90060.4-2005: Textile machinery. Product drawing and design document. Part 4: Requirement of design document Status: Valid
Basic dataStandard ID: FZ/T 90060.4-2005 (FZ/T90060.4-2005)Description (Translated English): Textile machinery. Product drawing and design document. Part 4: Requirement of design document Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W90 Classification of International Standard: 59.120 Word Count Estimation: 13,146 Date of Issue: 2005-05-18 Date of Implementation: 2006-01-01 Older Standard (superseded by this standard): FZ/T 90063-1995 Quoted Standard: GB/T 1.1; GB/T 1.2; FZ/T 90060.1; FZ/T 90060.5 Regulation (derived from): NDRC Notice No. 24 of 2005 Issuing agency(ies): National Development and Reform Commission, People Republic of China Summary: This standard specifies the requirements for textile machinery design document and its main content. This section applies to the textile machinery industry, the preparation of design documents. Other product design document is also available for implementation. FZ/T 90060.4-2005: Textile machinery. Product drawing and design document. Part 4: Requirement of design document---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Textile machinery.Product drawing and design document.Part 4. Requirement of design document ICS 59.120 W90 People's Republic of China Textile Industry Standard Replace FZ/T 90063-1995 Textile machinery Product drawings and design files Part 4. Requirements for design documents Released on.2005-05-18 2006-01-01 implementation National Development and Reform Commission of the People's Republic of China ForewordFZ/T 90060 includes the following nine parts under the general title of "Textile Machinery Product Drawings and Design Documents". --- Part 1. General; --- Part 2. Numbering; --- Part 3. Requirements for drawings; --- Part 4. Requirements for design documents; --- Part 5. Format; --- Part 6. Integrity; --- Part 7. Change; --- Part 8. Standardization review; --- Part 9. Management. This part is the fourth part of FZ/T 90060. This part is based on the needs of enterprises to implement computer-aided design (CAD) and enterprise quality management system and product market competition. According to relevant national standards and industry standards, the characteristics of the textile machinery industry have been fully considered. In the original FZ/T 90063-1995 "Textile machinery design The revision of the requirements, format and method of the document is based on JB/T 5054.5-2000 "Product drawings and design". The contents of the Document Integrity. This part replaces FZ/T 90063-1995 "Textile Machinery Design Document Requirements, Format and Filling Method", and the main difference from the original standard as follows. ---The standard name was changed from "Requirement, Format and Filling Method of Textile Machinery Design Document" to "Textile Machinery Product Drawing and Design Document" Part 4. Requirements for design documents"; --- Requirements for documents added in accordance with Part 2 of this standard; --- Added "calculation method for product standardization coefficient". Appendix A of this section is an informative annex. This part was proposed by the China Textile Industry Association. This part is under the jurisdiction of the National Textile Machinery and Accessories Standardization Technical Committee. This section is mainly drafted by. China Textile Machinery Research Institute, Zhengzhou Textile Machinery Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Jingwei Textile Machinery Co., Ltd., China Textile Machinery (Group) Co., Ltd., Best Machinery Manufacturing Co., Ltd. The main drafters of this section. Huang Hongkang, Yan Guohong, Lin Jian, Shen Yingquan, Zhao Guanhong, Xu Jinglu. Textile machinery Product drawings and design files Part 4. Requirements for design documents1 ScopeThis part of FZ/T 90060 specifies the requirements and main contents of the textile machinery design document. This section applies to the preparation of design documents for the textile machinery industry. Other product design documents can also be referred to for implementation.2 Normative referencesThe provisions in the following documents become the provisions of this part by reference to this part of FZ/T 90060. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section. GB/T 1.1 Standardization Work Guidelines Part 1. Standard Structure and Writing Rules GB/T 1.2 Standardization Work Guide Part 2. Method for determining the content of normative technical elements in standards FZ/T 90060.1 Textile machinery product drawings and design documents - Part 1. General FZ/T 90060.5 Textile machinery product drawings and design documents - Part 5. Format3 General3.1 The design documents specified in this part are the documents produced during the development of textile machinery products, according to the relevant provisions of the products and enterprises. Similarly, it is allowed to increase, decrease or merge in the actual application process. 3.2 The definitions and formats established by FZ/T 90060.1 and FZ/T 90060.5 apply to this section.4 requirements4.1 Market Forecast Report The market forecast report is one of the documents that the company plans to design and develop the product. The content is generally. a) Induction and analysis of market supply and demand information for the same type of products; b) market requirements for product variety, specifications, performance, quality, price, etc.; c) predict the product life cycle; d) preliminary analysis of product economic effects; e) The need for new product development. 4.2 Research Report The research report is one of the documents that the company plans to design and develop the product. Its content is generally. a) Overview. Including the basis, purpose and requirements of the survey, the time, place, participation units and composition of the survey; b) The use of the product. Including the main use of the product, market demand, environmental conditions for the use of the product, and the adoption of new principles, new Structure, new technology, new materials, new processes; c) Market and user requirements. Including the user's specific requirements for product structure, electrical control and main performance indicators of the machine; d) Technical and economic analysis. Including the analysis and comparison of technical performance of similar products at home and abroad, important supporting parts, users use the machine The fault form, cause analysis and preventive measures to be taken; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 90060.4-2005_English be delivered?Answer: Upon your order, we will start to translate FZ/T 90060.4-2005_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 90060.4-2005_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 90060.4-2005_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
