FZ/T 01147-2018 English PDFUS$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 01147-2018: Textiles -- The method for smoothness of fabrics Status: Valid
Basic dataStandard ID: FZ/T 01147-2018 (FZ/T01147-2018)Description (Translated English): Textiles -- The method for smoothness of fabrics Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W04 Word Count Estimation: 5,592 Date of Issue: 2018-12-21 Date of Implementation: 2019-07-01 Regulation (derived from): Ministry of Industry and Information Technology Announcement No.67 of 2018 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the test method for fabric flatness. This standard does not apply to washed fabrics and fabrics with special design, such as jacquard, pleats, fluffy fabrics, etc. FZ/T 01147-2018: Textiles -- The method for smoothness of fabrics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Textiles - The method for smoothness of fabrics ICS 59.080.30 W04 People's Republic of China Textile Industry Standard Textile fabric flatness test method 2018-12-21 released 2019-07-01 implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the Basic Standards Branch of the National Textile Standardization Technical Committee (SAC/TC209/SC1). The main drafters of this standard. China Textile Standard Inspection and Certification Co., Ltd., Lutai Textile Co., Ltd., Jiangxi Changshuo Outdoor Leisure Supplies Co., Ltd., China National Accreditation Center for Conformity Assessment. The main drafters of this standard. Zhang Rui, He Jie, Liu Tao, Sun Jing, Hu Guohui, Yu Long, Xu Baiqing, Fu Wei, Zhang Jianxiang, Ni Aihong. Textile fabric flatness test method1 ScopeThis standard specifies the test method for fabric flatness. This standard is mainly applicable to woven fabrics and knitted fabrics. It does not apply to fabrics after washing treatment and fabrics with special designs, such as Flowers, folds, fluffy fabrics, etc.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 6529 Standard atmosphere for textile humidity control and testing3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Smoothness The degree of unevenness of the fabric surface is characterized by the coefficient of variation of the measured thickness under certain test conditions. 3.2 Zero positionofdisplacement The test head is at the starting position before the test, and returns to this position after each test. 3.3 Zero positionofbenchmark The position of the test head when the plane of the test head is in contact with the plane of the test bench, and the load display value reaches the set value of the auto-stop pressure.4 PrincipleUnder certain pressure conditions, measure the thickness value of each point of the sample spread on the test bench, and calculate the coefficient of variation of the sample thickness value. To characterize the flatness of the fabric.5 equipmentThe flatness tester is mainly composed of five parts. load sensor, displacement sensor, speed control device, test head and test bench, which should meet the following requirements Technical conditions. a) Load sensor. The self-stop pressure setting value should be within the range of 10% to 90% of the sensor range, and the force value indication or recording error should not If it exceeds ±0.5%, the drift is not more than 0.1cN/min and 0.5cN/h, and there should be overload automatic stop protection control. b) Displacement sensor. the displacement is within 3mm, the error does not exceed ±0.01mm, the displacement is more than 3mm, the error does not exceed ±0.05mm, the indication is accurate to 0.01mm. c) Speed regulating device. It should be able to set the displacement speed of 0.75mm/min, 1mm/min, 5mm/min and 10mm/min, with an accuracy of ±4%. ...... |
