FZ/T 01075-2010 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 01075-2010	239	Add to Cart	3 days	Inspection method for surface detects on garment interlinings	Obsolete
FZ/T 01075-2000	199	Add to Cart	2 days	Regulations on stip labeling and length free of charge of local defects on interlinings for garments	Obsolete
FZ/T 01075-1999	RFQ	ASK	3 days	(Chinese Industry Standard)	Obsolete

Similar standards

GB/T 6097   FZ/T 10007   FZ/T 01085   FZ/T 01076   FZ/T 01078   FZ/T 01077   

Basic data

Standard ID: FZ/T 01075-2010 (FZ/T01075-2010)
Description (Translated English): Inspection method for surface detects on garment interlinings
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W10
Classification of International Standard: 59.080.01
Word Count Estimation: 6,659
Date of Issue: 2010-08-16
Date of Implementation: 2010-12-01
Older Standard (superseded by this standard): FZ/T 01075-2000
Quoted Standard: GB/T 250; GB/T 250
Regulation (derived from): Engineering (2010) No. 115
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the appearance of clothing lining defects terms and definitions, inspection, testing methods, inspection reports. This standard applies to all kinds of material woven and knitted lining appearance defect inspection. This is also applicable to non -woven interlining test appearance defect.

FZ/T 01075-2010: Inspection method for surface detects on garment interlinings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Inspection method for surface detects on garment interlinings ICS 59.080.01 W10 People's Republic of China textile industry standards Replacing FZ/T 01075-2000 Clothing lining appearance defect inspection method Issued on. 2010-08-16 2010-12-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard is a revision of FZ/T 01075-2000 "garment interlining appearance quality defects Locality knot braid and put foot rule". Instead of the standard FZ/T 01075-2000, compared with FZ/T 01075-2000, the following main changes. --- The standard name be changed to "clothing lining appearance defect inspection method"; --- Excess coating, the coating unevenness qualitative and quantitative specifications; --- Remove the deep, in light of the definition, the definition of the increase taking powder; --- Adjust test conditions prescribed standard defect put feet; --- Increase testing methods disseminated defects, meter provision, Chapter 6 inspection reports; --- Second product adjusted for qualified products. The standard proposed by China Textile Industry Association. This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized. This standard was drafted. Shanghai textile industry technical supervision, Weibosite lining (Nantong) Co., Ltd., Nantong Haihui Garment Accessories Co., Ltd. Zhejiang Three of fusible interlining, China Textiles Industry Association, Shanghai Institute of clothing. The main drafters. Zhang Baoqing, Shen Rong, Cao Ping, Yan Huarong, LI Gui-mei, Nieya Yuan, Zhao Lujiang. This standard replaces the standards previously issued as follows. --- GB/T 11393-1989; --- FZ/T 01075-1999, FZ/T 01075-2000. Clothing lining appearance defect inspection method

1 Scope

This standard specifies the terms and definitions clothing lining the appearance of defects, inspection, testing methods, inspection reports. This standard applies to all kinds of materials and woven lining knit lining appearance defect inspection. This standard also applies to non-woven interlining appearance defect inspection.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 250 textile color fastness test assessing change in color like the gray card

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Braided knot (or labeling) label Braided knot defects (defects or labeling) for short, is the appearance of quality textile products at the time of inspection, the appearance of defects be marked (by threading or paste Standard way) one way. 3.2 Put foot lengthtogive Standard defects put feet short, also called grading refers to textile products and add up due to defect length. 3.3 Linear defect linedefect Along by the (longitudinal) direction or weft (horizontal) to extend the width of not more than 0.3cm defects. 3.4 Strip defect stripdefect Along by the (longitudinal) direction or weft (horizontal) to the extension of a width of more than 0.3cm (including bulk) defects. 3.5 Damaged damaging Warp and weft (vertical and horizontal) to break two or more yarns or 0.2cm2 and above the hole and away from the edge of the broken edge over 2cm, 0.3cm above Hop flowers. 3.6 Weaving defects weavingdefects Fabric weaving defects caused by such double weft, weft shrinkage, thin dense road, weaving and other debris. 3.7 Packet seam overseam In the production process, with the package seam sewing cloth connected. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 01075-2010_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 01075-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 01075-2010_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 01075-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 01075-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01075-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.