FZ/T 01076-2019 PDF EnglishUS$229.00 · In stock · Download in 9 seconds
FZ/T 01076-2019: Making method for composite specimen of fusible interlinings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid FZ/T 01076: Historical versions
Similar standardsFZ/T 01076-2019: Making method for composite specimen of fusible interlinings---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/FZT01076-2019Making method for composite specimen of fusible interlinings ICS 59.080.01 W10 People's Republic of China Textile Industry Standard Replacing FZ/T 01076-2010 Method for preparing adhesive lining combined sample Published on.2019-05-02 2019-11-01 implementation Ministry of Industry and Information Technology of the People's Republic of China ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 01076-2010 "Method for making hot-melt adhesive lining dimensional change combination sample", and FZ/T 01076-2010 Compared to the main technical changes are as follows. --- Adjust the standard name to "manufacturing method of bonded lining combination sample"; --- The standard range is adjusted to the method of making the combined sample made of the adhesive lining and the standard fabric, and the appearance and dimensional changes are deleted; --- Added a chapter on terms and definitions; in the chapter on the bonded liner sample, the content of the adhesive liner sample category is added; --- Supplemented the standard fabric requirements and pressing conditions of the relevant adhesive lining, and adjusted the temperature range of the shirt lining pressing; --- Removed dimension content. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the National Textile Standardization Technical Committee Cotton Textile Subcommittee (SAC/TC209/SC10). This standard was drafted. Weibosite Interlining (Nantong) Co., Ltd., Shanghai Textile Industry Technical Supervision Institute, Zhejiang Jinsanfa Adhesive Lining Co., Ltd., Qihe New Materials Technology (Jiashan) Co., Ltd., Nantong Jianghuai Interlining Co., Ltd., Shanghai Tianqiang Textile Co., Ltd., China Industry Textile Industry Association. The main drafters of this standard. Shen Rong, Jiang Qian, Zhang Baoqing, Wang Aiqin, Lu Zhonglei, Liu Feng, Li Meng, Li Guimei, He Jianyuan. The previous versions of the standards replaced by this standard are. ---GB/T 1139-1989; ---FZ/T 01076-1999, FZ/T 01076-2000, FZ/T 01076-2010. Method for preparing adhesive lining combined sample1 ScopeThis standard specifies the method for making a combined sample of a bonded backing and a standard fabric. This standard is applicable to the lining of woven fabrics, knitted fabrics and non-woven fabrics as base fabrics. Other adhesive linings can be referred to.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 5326 combed polyester-cotton blended printing and dyeing cloth GB/T 6529 Standard atmosphere for textile conditioning and testing GB/T 8628 Preparation, marking and measurement of fabric samples and garments in the test for dimensional change of textiles GB/T 8629-2017 Home washing and drying procedures for textile testing GB/T 8630 Determination of dimensional changes after washing and drying of textiles GB/T 17253 synthetic fiber fabric GB/T 22848 knitted finished fabric Standard bleaching cotton cloth for GB/T 25812 dye test FZ/T 01082 Test method for dry heat dimensional change of adhesive lining FZ/T 13001 dyed denim FZ/T 24002 combed wool FZ/T 24003 carded wool FZ/T 24004 combed low-wool blended and purified cilia3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Standard fabric standardfabric Specifications and quality, etc., in accordance with the standard, for the fabric of the sample combined with the adhesive liner.4 PrincipleOn the side of the adhesive lining coated with hot melt adhesive, covered with a suitable standard fabric, placed in a press, at specified temperature, pressure and time bars The parts are pressed and pressed to form a combined sample of the adhesive lining and the standard fabric.5 equipment and appliances5.1 Pressing machine. The temperature can be adjusted between 0 °C and.200 °C, the temperature accuracy is ±2 °C; the pressure of the press can be adjusted, and one can be applied. FZ/T 01076-2019 Making method for composite specimen of fusible interlinings ICS 59.080.01 W10 People's Republic of China Textile Industry Standard Replacing FZ/T 01076-2010 Method for preparing adhesive lining combined sample Published on.2019-05-02 2019-11-01 implementation Ministry of Industry and Information Technology of the People's Republic of ChinaForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 01076-2010 "Method for making hot-melt adhesive lining dimensional change combination sample", and FZ/T 01076-2010 Compared to the main technical changes are as follows. --- Adjust the standard name to "manufacturing method of bonded lining combination sample"; --- The standard range is adjusted to the method of making the combined sample made of the adhesive lining and the standard fabric, and the appearance and dimensional changes are deleted; --- Added a chapter on terms and definitions; in the chapter on the bonded liner sample, the content of the adhesive liner sample category is added; --- Supplemented the standard fabric requirements and pressing conditions of the relevant adhesive lining, and adjusted the temperature range of the shirt lining pressing; --- Removed dimension content. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the National Textile Standardization Technical Committee Cotton Textile Subcommittee (SAC/TC209/SC10). This standard was drafted. Weibosite Interlining (Nantong) Co., Ltd., Shanghai Textile Industry Technical Supervision Institute, Zhejiang Jinsanfa Adhesive Lining Co., Ltd., Qihe New Materials Technology (Jiashan) Co., Ltd., Nantong Jianghuai Interlining Co., Ltd., Shanghai Tianqiang Textile Co., Ltd., China Industry Textile Industry Association. The main drafters of this standard. Shen Rong, Jiang Qian, Zhang Baoqing, Wang Aiqin, Lu Zhonglei, Liu Feng, Li Meng, Li Guimei, He Jianyuan. The previous versions of the standards replaced by this standard are. ---GB/T 1139-1989; ---FZ/T 01076-1999, FZ/T 01076-2000, FZ/T 01076-2010. Method for preparing adhesive lining combined sample1 ScopeThis standard specifies the method for making a combined sample of a bonded backing and a standard fabric. This standard is applicable to the lining of woven fabrics, knitted fabrics and non-woven fabrics as base fabrics. Other adhesive linings can be referred to.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 5326 combed polyester-cotton blended printing and dyeing cloth GB/T 6529 Standard atmosphere for textile conditioning and testing GB/T 8628 Preparation, marking and measurement of fabric samples and garments in the test for dimensional change of textiles GB/T 8629-2017 Home washing and drying procedures for textile testing GB/T 8630 Determination of dimensional changes after washing and drying of textiles GB/T 17253 synthetic fiber fabric GB/T 22848 knitted finished fabric Standard bleaching cotton cloth for GB/T 25812 dye test FZ/T 01082 Test method for dry heat dimensional change of adhesive lining FZ/T 13001 dyed denim FZ/T 24002 combed wool FZ/T 24003 carded wool FZ/T 24004 combed low-wool blended and purified cilia3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Standard fabric standardfabric Specifications and quality, etc., in accordance with the standard, for the fabric of the sample combined with the adhesive liner.4 PrincipleOn the side of the adhesive lining coated with hot melt adhesive, covered with a suitable standard fabric, placed in a press, at specified temperature, pressure and time bars The parts are pressed and pressed to form a combined sample of the adhesive lining and the standard fabric.5 equipment and appliances5.1 Pressing machine. The temperature can be adjusted between 0 °C and.200 °C, the temperature accuracy is ±2 °C; the pressure of the press can be adjusted, and one can be applied. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of FZ/T 01076-2019 be delivered?Answer: The full copy PDF of English version of FZ/T 01076-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of FZ/T 01076-2019_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 01076-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- FZ/T 01076-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version FZ/T 01076-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01076-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of FZ/T 01076-2019?A step-by-step guide to download PDF of FZ/T 01076-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "FZ/T 01076-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
