CJ/T 111-2018 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
CJ/T 111-2018: Sleeve-clipping type brass pipe fitting
Status: Valid

CJ/T 111: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
CJ/T 111-2018	599	Add to Cart	5 days	Sleeve-clipping type brass pipe fitting	Valid
CJ/T 111-2000	999	Add to Cart	6 days	Polyethylene/aluminum/polyethylene composite pipe biet type copper tube fitting	Obsolete

Similar standards

GB/T 18920   GB/T 18921   GB/T 18919   CJJ/T 111   CJ/T 110   CJJ 101   

Basic data

Standard ID: CJ/T 111-2018 (CJ/T111-2018)
Description (Translated English): Sleeve-clipping type brass pipe fitting
Sector / Industry: Urban Construction Industry Standard (Recommended)
Classification of Chinese Standard: P40
Classification of International Standard: 91.140.80
Word Count Estimation: 26,215
Date of Issue: 2018-11-16
Date of Implementation: 2019-05-01
Older Standard (superseded by this standard): CJ/T 111-2000
Regulation (derived from): Ministry of Housing and Urban-Rural Development Announcement No. 2018 No. 299
Issuing agency(ies): Ministry of Housing and Urban-Rural Development of the People's Republic of China

CJ/T 111-2018: Sleeve-clipping type brass pipe fitting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Card sleeve copper pipe joint) ICS 91.140.80 P40 People's Republic of China urban construction industry standards Replace CJ/T 111-2000 Card sleeve copper pipe joint Published on.2018-11-16 2019-05-01 implementation Ministry of Housing and Urban-Rural Development

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is a revision of CJ/T 111-2000 "card-type copper pipe joints for aluminum-plastic composite pipes". With CJ/T 111-2000 The main technical content changes are as follows. --- The standard name was changed to "card sleeve type copper pipe joint"; --- Change the "Parts Machining" section to "Geometry" and delete the processing aspects (see 5.2); --- Modify "connection reliability" to "stretch resistance" (see 5.3.1); --- Change the "sealing" to "air tightness" and reduce the test pressure from 1.0MPa to 0.6MPa, in line with other standards (see 5.3.2); --- Change the "static internal pressure strength" to "hydrostatic strength" (see 5.3.3); ---Modify "hydraulic burst" to "hydraulic burst" (see 5.3.4); --- Increase the internal pressure of the thermal cycle test from (690 ± 69) kPa to 1.0 MPa, the alternating temperature of hot and cold from 15 ° C ~ 82 ° C to 20 ° C ~ At 90 ° C, the number of cycles increased from 1000 to 5000 (see 5.3.5); --- Change the thermal cycle test method to the method specified in GB/T 18991-2003 (see 6.8); --- Change Appendix A from a normative appendix to an informative appendix; --- Removed the "reducing tee (middle and one side equal)" pipe joint structure (see A.14). This standard was proposed by the Institute of Standardization of the Ministry of Housing and Urban-Rural Development. This standard is under the jurisdiction of the Building Water Supply and Drainage Standardization Technical Committee of the Ministry of Housing and Urban-Rural Development. This standard was drafted. Zhejiang Zhongyuan Maple Leaf Pipe Co., Ltd., Guangzhou Maple Leaf Pipe Co., Ltd., Guizhou Maple Leaf Pipe Co., Ltd. Zhejiang Jiuhao Technology Development Co., Ltd. The main drafters of this standard. Zhang Wenlong, Zhu Shiming, Yan Chao, Yang Kejie, He Jianxing, Wang Xinlu, and Qi Yongquan. The previous versions of the standards replaced by this standard are. ---CJ/T 111-2000. Card sleeve copper pipe joint

1 Scope

This standard specifies the product classification, structure and marking of the ferrule type copper pipe joints (hereinafter referred to as pipe joints) for building pipeline engineering. Materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to copper pipe joints of aluminum-plastic composite pipes and plastic pipe systems with nominal sizes of 12mm~32mm.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 196-2003 basic thread basic size GB/T 197-2018 Ordinary thread tolerance GB/T 1176 cast copper and copper alloy GB/T 1184-1996 Shape and position tolerances without tolerance values GB/T 1804-2000 General tolerances and tolerances for linear and angular dimensions without tolerances GB/T 2828.1. Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch sampling plan, searched by AQL GB/T 5231 processing copper and copper alloy grades and chemical composition GB/T 6111 Determination of internal pressure resistance of thermoplastic piping systems for fluid transport GB/T 7307-2001 55° unsealed pipe thread GB/T 15560-1995 Hydraulic instantaneous bursting and pressure test method for plastic pipes for fluid transportation Pull-out test of GB/T 15820 polyethylene pressure pipe and pipe fitting GB/T 17219 Safety evaluation criteria for drinking water distribution equipment and protective materials GB/T 18991-2003 Thermoplastic pipes and fittings for hot and cold water systems GB/T 18997.2-2003 Aluminium-plastic composite pressure pipes - Part 2. Aluminium tube butt welded aluminum-plastic tube HG/T 2811 Rotary shaft lip seal rubber material 3 classification, structure and marking 3.1 Classification 3.1.1 Pipe joints can be classified into the following types according to the external type. a) straight through, code S; b) elbow, code L; c) tee, code T; d) Stone, code X; e) Plug, code D. 3.1.2 Pipe joints can be divided into. a) for gas - working pressure is 0.4MPa; b) For cold and hot water --- working pressure is 1.0MPa. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of CJ/T 111-2018_English be delivered?

Answer: Upon your order, we will start to translate CJ/T 111-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of CJ/T 111-2018_English with my colleagues?

Answer: Yes. The purchased PDF of CJ/T 111-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version CJ/T 111-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version CJ/T 111-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.