PDF QB/T 5247-2018 English
Search result: QB/T 5247-2018
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| QB/T 5247-2018 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Hardware fitting of case and bag - Test method for durability of plastic buckle
| Valid |
PDF Preview: QB/T 5247-2018
QB/T 5247-2018: PDF in English (QBT 5247-2018) QB/T 5247-2018
QB
LIGHT INDUSTRY STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 59.140.35
Classification No.: Y 48
File No.: 63717-2018
Hardware fitting of case and bag - Test method for
durability of plastic buckle
ISSUED ON: MAY 08, 2018
IMPLEMENTED ON: SEPTEMBER 01, 2018
Issued by: Ministry of Industry and Information Technology of the People's
Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Principle ... 4
3 Devices ... 4
4 Test methods ... 5
5 Results representation ... 5
6 Test report ... 6
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of National Technical Committee on
Leather Industry of Standardization Administration of China (SAC/TC 252).
The drafting organizations of this Standard: Dongguan Hengyu Instrument Co., Ltd.,
National Leather Products Quality Supervision and Inspection Center (Guangzhou),
Huizhou Quality Metrology Supervision and Inspection Institute of Guangdong
Province, China Leather and Footwear Industry Research Institute, Guangzhou Quality
Supervision and Inspection Institute.
Main drafters of this Standard: Liu Long, Deng Chengliang, Hu Kun, Zhao Liguo, Nie
Xueming, Huang Yongqin, Duan Xiaoxia, Su Danxia.
This Standard is issued for the first time.
Hardware fitting of case and bag - Test method for
durability of plastic buckle
1 Scope
This Standard specifies the principle, devices, test methods, results representation and
test report of the durability test for plastic buckle.
This Standard is applicable to the test of plastic buckles for case and bag, clothing.
2 Principle
Simulate the use of the specimen. Reciprocate opening-closing to the specified number
of times at a certain frequency. Check the quality of the plastic buckle.
3 Devices
3.1 Plastic buckle durability testing machine
It shall include the components specified in 3.1.1~3.1.3.
3.1.1 The test device (see Figure 1 for the schematic diagram) consists of two sets of
specimen holders on the left and right. The left specimen holder is used to secure the
upper part of the buckle. It can also periodically press the positioning piece of the buckle
(left and right position or upper position). The right specimen holder is used to fix the
lower part of the buckle. It also makes the lower part do reciprocating forward and
withdrawing motion. The left and right specimen holders cooperate with each other, so
that the upper and lower parts of the buckle do horizontal reciprocating opening-closing
movement, and the movement frequency is adjustable.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|