Q3 10113000147C011-2018 PDF in English
Q3 10113000147C011-2018 (Q310113000147C011-2018) PDF English
Standards related to (historical): Q3 10113000147C011-2018
PDF Preview
Q3 10113000147C011-2018: PDF in English Q31/0113000147C011-2018
ENTERPRISE STANDARD OF SHANGHAI CITY
Emollient essence oil
润肤精华油
ISSUED ON: MARCH 05, 2018
IMPLEMENTED ON: MARCH 05, 2018
Issued by: Shanghai Life-Beauty Cosmetics Co., Ltd.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Technical requirements ... 5
3.1 Sensory indicators ... 5
3.2 Physical-chemical indicators ... 5
3.3 Hygienic indicators ... 6
3.4 Net content requirements ... 6
3.5 Packaging appearance requirements ... 6
4 Inspection method ... 6
4.1 Sensory indicators ... 6
4.2 Physical-chemical indicators ... 6
4.3 Hygienic indicators ... 7
4.4 Net content deviation ... 7
5 Inspection rules ... 7
6 Marking, packaging, transportation, storage, shelf life ... 8
6.1 Marking for sales packaging ... 8
6.2 Packaging ... 8
6.3 Transportation ... 8
6.4 Storage ... 9
6.5 Shelf life ... 9
Emollient essence oil
1 Scope
This standard specifies the technical requirements, inspection methods, inspection
rules, marking, packaging, transportation, storage and transportation requirements for
emollient essence oil.
This standard applies to oily-liquid series products that are produced by Shanghai Life-
Beauty Cosmetics Co., Ltd.
2 Normative References
The following documents are essential for the application of this document. For dated
references, only the dated versions apply to this document. For the cited documents
without date, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB 5296.3 Instruction for use of consumer products - General labelling for
cosmetics
GB 7916 Hygienic standard for cosmetics
GB/T 13531.4 General methods on determination of cosmetics - Determination of
relative density
GB/T 14454.4 Fragrance/Flavor substances - Determination of refractive index
GB/T 26516 Massage essential oil
QB/T 1684 Inspecting rules for cosmetics
QB/T 1685 Requirements of packaging appearance for cosmetic products
JJF 1070 Rules of Metrological Testing for Net Quantity of Products in Prepackages
with Fixed Content
“Measures for the Supervision and Administration of Measurement of Quantitative
Packaging Commodities” -- State Administration of Quality Supervision, Inspection
and Quarantine – [2005] Order No.75
“Cosmetic Safety Technical Specifications (2015 Edition)” -- State Food and Drug
Administration -- Announcement 2015 No.268
Test according to the method specified in GB/T 13531.4.
4.2.2 Refractive index
Test according to the method specified in GB/T 14454.4.
4.2.3 Acid value
Test according to the method specified in Appendix A of GB/T 26516.
4.2.4 Heat resistance
4.2.4.1 Instruments
Constant temperature incubator: The temperature control accuracy is 1°C.
4.2.4.2 Operating procedures
Adjust the constant temperature incubator to (40±1)°C in advance; place a bottle of
the packaged sample in the constant temperature incubator. Take out after 24 h;
restore to room temperature, then observe visually.
4.2.5 Cold resistance
4.2.5.1 Instruments
Constant temperature incubator: The temperature control accuracy is 1°C.
4.2.5.2 Operating procedures
Adjust the constant temperature incubator to (5±1)°C in advance; place a bottle of the
packaged sample in the constant temperature incubator. Take out after 24 h; restore
to room temperature, then observe visually.
4.3 Hygienic indicators
Test according to the method specified in "Cosmetics Safety Technical Specifications
(2015 Edition)".
4.4 Net content deviation
Follow the method specified in JJF 1070.
5 Inspection rules
5.1 Inspection rules are carried out in accordance with the provisions of QB/T 1684.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|