GB/T 16632-2019 PDF English
Search result: GB/T 16632-2019_English: PDF (GB/T16632-2019)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 16632-2019 | English | 100 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Determination of scale inhibition performance of water treatment chemicals -- Calcium carbonate precipitation method
| Valid |
| GB/T 16632-2008 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Determination of scale inhibition performance of water treatment agents -- Calcium carbonate precipitation method
| Obsolete |
| GB/T 16632-1996 | English | 239 |
Add to Cart
|
2 days
|
The determination of scale inhibition performance of water treatment agents--Calcium carbonate precipitation method
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 16632-2019 Related standards: GB/T 16632-2019
PDF Preview: GB/T 16632-2019
PDF Preview: GB/T 16632-2008
GB/T 16632-2019: PDF in English (GBT 16632-2019) GB/T 16632-2019
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.040.40
G 76
Replacing GB/T 16632-2008
Determination of scale inhibition performance of water
treatment chemicals - Calcium carbonate precipitation
method
ISSUED ON: AUGUST 30, 2019
IMPLEMENTED ON: JULY 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Method summary ... 4
4 Reagents or materials ... 5
5 Instruments and apparatuses ... 7
6 Test water ... 7
7 Preparation of sample solution ... 7
8 Test procedure ... 8
9 Result calculation ... 8
10 Allowable difference ... 8
Determination of scale inhibition performance of water
treatment chemicals - Calcium carbonate precipitation
method
1 Scope
This Standard specifies the determination of scale inhibition performance of
water treatment chemicals to inhibit calcium carbonate precipitation -- calcium
carbonate precipitation method.
This Standard applies to the evaluation of the scale inhibition performance of
water treatment chemicals to inhibit calcium carbonate precipitation under the
same conditions in the circulating cooling water system; it also applies to the
screening of the water treatment chemicals to inhibit calcium carbonate scale
formulation.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 601, Chemical reagent - Preparations of reference titration solutions
GB/T 603, Chemical reagent - Preparations of reagent solutions for use in
test methods
GB/T 6682, Water for analytical laboratory use - Specification and test
methods
3 Method summary
Use water for actual working conditions, or prepared water that contains a
certain amount of bicarbonate radical and calcium ions AND water treatment
chemicals to prepare into the test solution. Under heating conditions, promote
the accelerated decomposition of calcium bicarbonate into calcium carbonate.
After reaching the equilibrium, determine the calcium ion concentration in the
test solution. The larger the calcium ion concentration, the better the scale
inhibition performance of the water treatment chemicals.
V -- the value of the volume of the taken sodium bicarbonate standard solution,
in milliliters (mL) (V = 5).
4.5 Calcium chloride standard solution: 1 mL contains about 6.0 mg of Ca2+;
prepare and calibrate according to the following steps:
a) Preparation: weigh 16.7 g of anhydrous calcium chloride into a 100 mL
beaker; use water to dissolve it; transfer all to a 1 000 mL volumetric flask;
use water to dilute to the mark; shake well.
b) Calibration: pipette 2.00 mL of calcium chloride standard solution into a
250 mL conical flask; add about 80 mL of water, 5 mL of potassium
hydroxide solution and about 0.1 g of calcium-carboxylic acid indicator;
use Ethylene Diamine Tetraacetic Acid standard titration solution to titrate
until the solution turns from purple-red to bright blue as the end point.
c) Calculation: calculate the content of calcium ion (Ca2+) by mass
concentration ρ2, according to Formula (2):
Where:
ρ2 -- the mass concentration of calcium ion (Ca2+), in milligrams per milliliter
(mg/mL);
V1 -- the value of the volume of Ethylene Diamine Tetraacetic Acid standard
titration solution that is consumed in the titration, in milliliters (mL);
c -- the exact value of the actual concentration of Ethylene Diamine Tetraacetic
Acid standard titration solution, in moles per liter (mol/L);
M -- the value of the molar mass of calcium ion (Ca2+), in grams per mole (g/mol)
(M = 40.08);
V -- the value of the volume of the taken calcium chloride standard solution, in
milliliters (mL) (V = 2).
4.6 Hydrochloric acid standard titration solution: c(HCl) is about 0.1 mol/L.
4.7 Ethylene Diamine Tetraacetic Acid standard titration solution: c (EDTA) is
about 0.01 mol/L.
4.8 Bromocresol green-methyl red indicator solution
4.9 Calcium-carboxylic acid indicator: weigh 0.2 g of calcium-carboxylic acid
indicator [2-hydroxy-1(2-hydroxy-4-sulfo-1-naphthalenazo)-3-naphthoic acid]
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|