Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 33835-2017 PDF English

US$90.00 · In stock · Download in 9 seconds
GB/T 33835-2017: Test method of impact strength for friction material
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 33835-201790 Add to Cart Auto, 9 seconds. Test method of impact strength for friction material Valid

Similar standards

GB/T 37208   GB/T 37224   GB/T 34007   GB/T 45335   

GB/T 33835-2017: Test method of impact strength for friction material

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33835-2017
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.040.40 Q 69 Test Method of Impact Strength for Friction Material Issued on: MAY 31, 2017 Implemented on: APRIL 1, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. 3. No action is required - Full-copy of this standard will be automatically & immediately delivered to your EMAIL address in 0~60 minutes.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Test Conditions ... 4 3 Specimen Preparation ... 5 4 Test Procedures ... 7 5 Calculation ... 7 6 Test Report ... 8

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard was proposed by China Building Material Federation. This Standard shall be under the jurisdiction of National Technical Committee for Standardization of Non-Metallic Mineral Products (SAC/TC 406). Drafting organizations of this Standard. Fujian Huari Automotive Parts Co., Ltd., Shandong Province Lianshan Shenli Auto Parts Co., Ltd., Xiamen Lixing Damo Friction Material Co., Ltd., Ningguo Feiying Auto Spare Parts Co., Ltd., Xianyang Design Institute of Non-Metallic Minerals Research, TMD Friction Technology (Shanghai) Co., Ltd., Non-Metallic Mineral Products Quality Supervision Test Center, and Hangzhou Westlake Friction Material Co., Ltd. Chief drafting staffs of this Standard. Pan Yucheng, Shang Xingchun, Su Meizhen, Feng Jingyou, Ye Jialing, Sun Qichun, Li Panfei, Zhang Jianli, Yang Lijun, and Shen Yongsheng. Test Method of Impact Strength for Friction Material

1 Scope

This Standard specifies the sample preparation and test methods for the impact strength test of friction material. This Standard is applicable to the friction material with resin as the binder.

2 Test Conditions

2.1 The test equipment is the simple beam pendulum impact tester; its impact energy is divided into two levels, namely, Level-0.980 7 J and Level-3.922 8 J; the impact velocity is of 2.9m/s. 2.2 The size and interrelationships among pendulum, specimen and supporting seat shall conform to the provisions of Figure 1. 2.3 The consumption value of its own stored energy during the test shall be within 10% ~ 80% full scale of each level.

4 Test Procedures

4.1 Adjust the impact tester fulcrum distance L into 40.0mm±0.2mm. 4.2 Select the appropriate pendulum; the load shall meet the requirements of 2.3. 4.3 Calibrate the zero point on the dial plate of tester; place the pendulum on the pre- lifting hook position. 4.4 Use the Vernier caliper with precision of 0.01mm to measure the specimen width and thickness. Measure 3 points evenly distributed within 10mm range of the specimen middle part; then take the minimum value. 4.5 Place the specimen horizontally on the framework as per the provisions of 3.2; so that the pendulum blade can strike the entire thickness line; and align with the specimen centerline. 4.6 Smoothly release the lock hook; so that the pendulum falls freely; and the specimen is exerted impact load and is broken; read the consumed power from the dial plate. The specimen shall be broken within 10mm range in the middle; otherwise, such test results are rejected.

5 Calculation

The impact strength of specimen shall be calculated as per Formula (1). Where. aK – impact strength of specimen, in J/cm2; AK – consumed impact energy of specimen, in J; b – specimen width, in cm; d - specimen thickness, in cm. Take the arithmetic mean of the test results of 5 specimens as the report value; retain 3 digits after the decimal point. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 33835-2017 be delivered?Answer: The full copy PDF of English version of GB/T 33835-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 33835-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33835-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33835-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 33835-2017?

A step-by-step guide to download PDF of GB/T 33835-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 33835-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9