|
Std ID |
Description (Standard Title) |
|
GB/T 39694-2020
|
Hydrogenated acrylonitrile-butadiene rubber (HNBR) -- General specification and evaluation procedure
|
|
GB/T 39695-2020
|
Identification of volatile components of rubber fumes. Thermodesorption and gas chromatographic method with mass spectrometric detection
|
|
GB/T 39696-2020
|
Determination of flowability of fine ceramic powders. Calibrated funnel
|
|
GB/T 39697.1-2020
|
Rubber or plastics covered rollers -- Specifications -- Part 1: Requirements for hardness
|
|
GB/T 39697.2-2020
|
Rubber or plastics covered rollers -- Specifications -- Part 2: Surface characteristics
|
|
GB/T 39698-2020
|
Confirmation methods for delivering common Portland cement
|
|
GB/T 39699-2020
|
Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection
|
|
GB/T 39700-2020
|
Treatment and disposal method for boron mud
|
|
GB/T 39701-2020
|
Limit and test method of ammonium ion content in fly ash
|
|
GB/T 39702-2020
|
Test method for force and moment of motor vehicle tyres
|
|
GB/T 39703-2020
|
Guideline for the testing of corrugated DeNOx catalysts
|
|
GB/T 39704-2020
|
Determination of effective thermal conductivity for vacuum insulation panels (VIP)
|
|
GB/T 39705-2020
|
Track bed vibration isolating mat for rail traffic
|
|
GB/T 39706-2020
|
Test method for dissolution rate and quantity of SO42- released from gypsum
|
|
GB/T 39708-2020
|
Boron trifluoride
|
|
GB/T 39709-2020
|
Test methods of multiple units glass, windows static pressure and windows sealing performance
|
|
GB/T 39710-2020
|
Polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) material for charging spot housing of electric vehicle
|
|
GB/T 39711-2020
|
Sulphoaluminate cement mending binder for marine engineering
|
|
GB/T 39712-2020
|
Sulphoaluminate cement for marine rapid construction
|
|
GB/T 39713-2020
|
Testing mothed for specific surface area of ceramic powders -- BET gas adsorption operation
|
|
GB/T 39714.1-2020
|
Plastics -- Polytetrafluoroethylene(PTFE) semi-finished products -- Part 1: Requirements and designation
|
|
GB/T 39714.2-2020
|
Plastics -- Polytetrafluoroethylene(PTFE)semi-finished products -- Part 2: Preparation of test specimens and determination of properties
|
|
GB/T 39716-2020
|
Test method for air-purification performance of photocatalytic materials and products -- Removal of nitric oxide
|
|
GB/T 39717-2020
|
Ceramic flat membrane for water treatment
|
|
GB/T 39718-2020
|
High mass flux catalyst for hydrogen peroxide decomposition
|
|
GB/T 39719-2020
|
Field and concentrated natural rubber latices -- Determination of magnesium content -- Cyanide-free titrimetric method
|
|
GB/T 39720-2020
|
Information security technology. Security technical requirements and test evaluation approaches for smart mobile terminal
|
|
GB/T 39722-2020
|
Superconducting electronic devices -- Generic specification for sensors and detectors
|
|
GB/T 39723-2020
|
Technical specification for communication network system of BeiDou ground-based augmentation system
|
|
GB/T 39724-2020
|
Technical specifications and testing methods for cesium atomic clock
|
|
GB/T 39725-2020
|
Information security technology -- Guide for health data security
|
|
GB/T 39729-2020
|
General requirements for measurement of cell purity -- Flow cytometry
|
|
GB/T 39730-2020
|
General requirements for cell counting -- Flow cytometry
|
|
GB/T 39733-2020
|
Recycling iron-steel materials
|
|
GB/T 39734-2020
|
Specification for evaluation of “on-the-spot” and “online” administrative service
|
|
GB/T 39735-2020
|
Guidelines for administrative service evaluation
|
|
GB/T 4343.2-2020
|
Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity
|
|
GB/T 4737-2020
|
Test method for osmosis of daily-use pottery
|
|
GB/T 5100-2020
|
Welded steel gas cylinders
|
|
GB/T 5584.1-2020
|
Rectangular copper or aluminium and its alloy wires for electrical purposes -- Part 1：General
|
|
GB/T 5584.2-2020
|
Rectangular copper or aluminium and its alloy wires for electrical purposes -- Part 2: Rectangular copper and copper alloy wire
|
|
GB/T 5584.4-2020
|
Rectangular copper or aluminium and its alloy wires for electrical purposes -- Part 4: Strip copper conductor
|
|
GB/T 6036-2020
|
Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening(Gehman test)
|
|
GB/T 6113.203-2020
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-3: Methods of measurement of disturbances and immunity -- Radiated disturbance measurements
|
|
GB/T 7260.40-2020
|
Uninterruptible power systems (UPS) -- Part 4: Environmental aspects. Requirements and reporting
|
|
GB/T 7260.503-2020
|
Uninterruptible power systems (UPS) -- Part 5-3: DC output UPS. Performance and test requirements
|
|
GB/T 7383-2020
|
Non-ionic surface active agents -- Determination of hydroxyl value
|
|
GB/T 7424.24-2020
|
Optical fibre cable generic specification -- Part 24: Basic optical cable test procedures. Electrical test methods
|
|
GB/T 7543-2020
|
Single-use sterile rubber surgical gloves
|
|
GB/T 7588.1-2020
|
Safety rules for the construction and installation of lifts -- Part 1: Passenger and goods passenger lifts
|
|
GB/T 7588.2-2020
|
Safety rules for the construction and installation of lifts -- Part 2: Design rules, calculations, examinations and tests of lift components
|
|
GB/T 7758-2020
|
Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
|
|
GB/T 9937-2020
|
Dentistry -- Vocabulary
|
|
GB/T 39737-2020
|
Specification for national park establishment
|
|
GB/T 39738-2020
|
Specification for monitoring of the national park
|
|
GB/T 39739-2020
|
Specification for assessment of the national park
|
|
GB/T 39740-2020
|
Specification of demarcating and marking boundary for nature protected area
|
|
GB/T 39791.1-2020
|
(Technical Guide for Eco-environmental Damage Identification and Assessment General Outline and Key Links Part 1: General Outline)
|
|
GB/T 39791.2-2020
|
(Technical Guidelines for Eco-environmental Damage Identification and Assessment General Outline and Key Links Part 2: Damage Investigation)
|
|
GB/T 39792.1-2020
|
(Technical Guidelines for Identification and Assessment of Eco-environmental Damage Environmental Elements Part 1: Soil and Groundwater)
|
|
GB/T 39792.2-2020
|
(Technical Guidelines for Identification and Assessment of Eco-environmental Damage Environmental Elements Part 2: Surface Water and Sediments)
|
|
GB/T 39793.1-2020
|
(Technical Guidelines for Eco-environmental Damage Appraisal and Assessment Basic Methods Part 1: Virtual Control Cost Method of Air Pollution)
|
|
GB/T 39793.2-2020
|
(Technical Guide for Eco-environmental Damage Appraisal and Assessment Basic Method Part 2: Virtual Treatment Cost Method of Water Pollution)
|
|
GB/T 10001.2-2021
|
Public information graphical symbols -- Part 2: Symbols for tourism and entertainment
|
|
GB/T 10001.3-2021
|
Public information graphical symbols -- Part 3: Symbols for passenger and cargo transport
|
|
GB/T 10001.4-2021
|
Public information graphical symbols -- Part 4: Symbols for recreation sport
|
|
GB/T 10001.5-2021
|
Public information graphical symbols -- Part 5: Symbols for shopping
|
|
GB/T 10001.6-2021
|
Public information graphical symbols -- Part 6: Symbols for medical treatment and health care
|
|
GB/T 10001.7-2021
|
Public information graphical symbols -- Part 7: Symbols for office and teaching
|
|
GB/T 10001.9-2021
|
Public information graphical symbols -- Part 9: Symbols for accessible facilities
|
|
GB/T 10006-2021
|
Plastics -- Film and sheeting -- Determination of the coefficients of friction
|
|
GB/T 10781.11-2021
|
Quality requirements for baijiu -- Part 11: Fuyuxiangxing baijiu
|
|
GB/T 10781.1-2021
|
Quality requirements for baijiu -- Part 1: Nongxiangxing baijiu
|
|
GB/T 10782-2021
|
General rule for the quality of preserved fruits
|
|
GB/T 11313.35-2021
|
Radio-frequency connectors -- Part 35: Sectional specification for 2.92 series R. F. connectors
|
|
GB/T 11313.40-2021
|
Radio-frequency connectors -- Part 40: Sectional specification for 2.4 series R. F. connectors
|
|
GB/T 11313.41-2021
|
Radio-frequency connectors -- Part 41: Sectional specification for CQA series quick lock R. F. coaxial connectors
|
|
GB/T 1149.4-2021
|
Internal combustion engines -- Piston rings -- Part 4: Quality requirements
|
|
GB/T 1149.6-2021
|
Internal combustion engines -- Piston rings -- Part 6: Scraper rings made of cast iron
|
|
GB/T 11760-2021
|
Hulless barley
|
|
GB/T 12237-2021
|
Steel ball valves for petroleum, petrochemical and allied industries
|
|
GB/T 12241-2021
|
Safety valves -- General requirements
|
|
GB/T 12242-2021
|
Pressure relief devices -- Performance test code
|
|
GB/T 12668.901-2021
|
Adjustable speed electrical power drive systems -- Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications -- General requirements for setting energy efficiency standards for power driven equipment usin
|
|
GB/T 12668.902-2021
|
Adjustable speed electrical power drive systems -- Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications -- Energy efficiency indicators for power drive systems and motor starters
|
|
GB/T 12736-2021
|
Conveyor belts -- Determination of strength of mechanical fastenings -- Static test method
|
|
GB/T 12817-2021
|
General technical specification for railway passenger car
|
|
GB/T 12818-2021
|
Rules for inspecting and testing of railway passenger car after completion of construction
|
|
GB/T 12975-2021
|
General specification for synchronous generator in ships
|
|
GB/T 13174-2021
|
Determination of detergency and cycle of washing property for laundry detergents
|
|
GB/T 1406.3-2021
|
Types and dimensions of lamp caps -- Part 3: Prefocus caps
|
|
GB/T 14191.2-2021
|
Prosthetics and orthotics -- Vocabulary -- Part 2: Terms relating to external limb prostheses and wearers of these prostheses
|
|
GB/T 14231-2021
|
Determination of efficiency for gear units
|
|
GB/T 14272-2021
|
Down garments
|
|
GB/T 14352.19-2021
|
Methods for chemical analysis of tungsten ores and molybdenum ores -- Part 19: Determination of bismuth, cadmium, cobalt, copper, iron, lithium, nickel, phosphorus, lead, strontium, vanadium and zinc content -- Inductive-coupled plasma atomic emission spe
|
|
GB/T 14352.20-2021
|
Methods for chemical analysis of tungsten ores and molybdenum ores -- Part 20：Determination of niobium，tantalum，zirconium，hafnium and 15 rare earth elements content -- Inductively coupled plasma mass spectrometry
|
|
GB/T 14352.21-2021
|
Methods for chemical analysis of tungsten ores and molybdenum ores -- Part 21: Determination of arsenic content -- Hydride generation atomic fluorescence spectrometry
|
|
GB/T 14352.22-2021
|
Methods for chemical analysis of tungsten ores and molybdenum ores -- Part 22：Determination of antimony content -- Hydride generation atomic fluorescence spectrometry
|
|
GB/T 14383-2021
|
Forged fittings, socket-welding and threaded
|
|
GB/T 1454-2021
|
Test method for edgewise compressive properties of sandwich constructions
|