GB/T 39722-2020 English PDFUS$454.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 39722-2020: Superconducting electronic devices - Generic specification for sensors and detectors Status: Valid
Basic dataStandard ID: GB/T 39722-2020 (GB/T39722-2020)Description (Translated English): Superconducting electronic devices - Generic specification for sensors and detectors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L85 Classification of International Standard: 17.220, 29.050 Word Count Estimation: 24,239 Date of Issue: 2020-12-14 Date of Implementation: 2021-07-01 Quoted Standard: IEC 60027-1; IEC 60027-2; IEC 60027-3; IEC 60027-4; IEC 60027-5; IEC 60027-6; IEC 60027-7; IEC 60050-815; IEC 60417; IEC 60617; ISO 1000; ISO 7000 Adopted Standard: IEC 61788-22-1-2017, IDT Regulation (derived from): National Standard Announcement No. 28 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard specifies general specifications for superconducting sensors and detectors. These are the basis for the specifications for various types of sensors and detectors in other parts of IEC 61788. The sensors and detectors are mainly composed of superconducting materials and rely on superconductivity or related phenomena. The measured target (physical quantity) includes magnetic field, electromagnetic wave, photon of different energy, electron, particle, a particle and others. GB/T 39722-2020: Superconducting electronic devices - Generic specification for sensors and detectors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (General specification for superconducting electronic devices, sensors and detectors) ICS 17:220,29:050 L85 National Standards of People's Republic of China Superconducting device General specifications for sensors and detectors (IEC 61788-22-1:2017,Superconductivity-Part 22-1:Superconducting 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsPreface Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Symbol 4 5 Terminology and classification 4 5:1 Term 4 5:2 Classification 7 6 Low temperature working conditions 8 7 Mark 8 7:1 Device identification 8 7:2 Packaging 8 8 Test and measurement steps 8 Appendix A (informative appendix) Coherent detection 9 A:1 Super thermal conductivity electronic bolometer (SHEB) type 9 A:2 Superconducting tunnel junction (STJ) type 10 A:3 Superconducting quantum interference device (SQUID) type 10 Appendix B (informative appendix) Direct detection 12 B:1 Metal Magnetometer (MMC) Type 12 B:2 Microwave Dynamic Inductance (MKI) Type 12 B:3 Superconducting ribbon cable (SS) type 13 B:4 Superconducting tunnel junction (STJ) type 14 B:5 Transition Edge Sensor (TES) Type 15 Appendix C (Normative Appendix) Graphical Symbols for Equipment and Charts 17 C:1 Superconducting area, single-ended superconducting connection 17 C:2 Superconducting area, single-ended normal conducting connection 17 C:3 Normal state-superconducting state boundary 17 C:4 A deformed connection form 17 C:5 Josephson knot 18 Reference 19 Figure A:1 SHEB mixer 9 Figure A:2 STJ mixer 10 Figure A:3 DC SQUID 11 Figure B:1 MMC detector 12 Figure B:2 MKI detector 13 Figure B:3 SS detector 14 Figure B:4 STJ detector 15 Figure B:5 TES detector 16 Figure C:1 Superconducting area, single-ended superconducting connection 17 Figure C:2 Superconducting area, single-ended normal conducting connection 17 Figure C:3 Superconducting area, one end of the superconducting connection and one end of the normally conducting connection (normal state-superconducting state boundary, (See IEC 60417-6370:2016-09) 17 Figure C:4 Series connection 18 Figure C:5 Superconducting region, the superconductors at both ends are connected by very small non-superconducting regions (Josephson junction, (See IEC 60417-6371:2016-09) 18 Table 1 Measured 4 Table 2 Category 5 being measured Table 3 Nomenclature of superconducting sensors and detectors: Examples of types, full names and English abbreviations 6 Table 4 Classification of detection principles 7ForewordThis standard was drafted in accordance with the rules given in GB/T 1:1-2009: This standard uses the translation method equivalent to IEC 61788-22-1:2017 "Superconductivity Part 22-1: Superconducting sub-device sensing General specification for detectors and detectors: The Chinese documents that have a consistent correspondence with the international documents cited in this standard are as follows: ---GB/T 2987 Electronic tube parameter symbol (IEC 60027 (alparts), NEQ) ---GB/T 2900:100-2017 Electrical terminology superconductivity (IEC 60050-815:2015, IDT) ---GB 3100-1993 International System of Units and Application (ISO 1000:1992, EQV) ---GB/T 4728 (all parts) Graphical symbols for electrical diagrams [IEC 60617] ---GB/T 5465 (all parts) Graphical symbols for electrical equipment Part 1: Overview and classification (IEC 60417) ---GB/T 16273 (all parts) Graphical symbols for equipment Part 1: General symbols (ISO 7000) This standard has made the following editorial changes: --- Modify the standard name to "General Specification for Superconducting Sub-device Sensors and Detectors": ---Add a note under 5:2 to explain the "coherent detection": Please note that certain contents of this document may involve patents: The issuing agency of this document is not responsible for identifying these patents: This standard was proposed by the Chinese Academy of Sciences: This standard is under the jurisdiction of the National Superconducting Standardization Technical Committee (SAC/TC265): Drafting organizations of this standard: Zhejiang Futong Technology Co:, Ltd:, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Chinese Academy of Sciences Institute of Physics, Nanjing University, Nankai University: The main drafters of this standard: You Lixing, Li Jie, Zhang Caihong, Zhang Guofeng, Ji Lu, Yang Xiaoyan:IntroductionSuperconducting characteristics such as superconducting energy gap, narrow superconducting state-normal state transition, nonlinear current-voltage curve, superconducting coherent state, magnetic flux quantumization, etc:, Will be affected by electromagnetic fields, photons, ions, etc: Various superconducting sensors and detectors have been developed using these different superconducting properties: they In terms of energy resolution, time response, and noise characteristics, it has extremely high performance that is difficult to achieve with other non-superconducting devices: The term "sensor" usually refers to a device or device used to measure physical quantities such as static or slowly varying electromagnetic fields, currents, and temperature: While "probing "Device" usually refers to a device that observes and records single quantum states, such as photons from infrared to gamma rays, single particles, etc: However, The boundary between "sensor" and "detector" is blurred: Therefore, both words will be used in this document: In addition, the sensor is used to detect Sensors are also feasible: For example, the superconducting transition edge sensor (TES) is used for X-ray detectors: The resulting temperature rise can be detected: Therefore, in this standard, the term "superconducting transition edge sensor X-ray detector" is used to indicate the use of TES A device or device for X-ray detection: Superconducting sensors and detectors have been used in many fields, including medical diagnosis, communications, mineral exploration, astronomical instruments, and quantum information processing And analytical instruments, etc: For users, there is currently a lack of unified specifications for related professional terms, legend symbols and test methods, so it is very It is necessary to establish a unified standardized document: Superconducting device General specifications for sensors and detectors1 ScopeThis standard gives general specifications for superconducting sensors and detectors: These are the various types of sensors in other parts of IEC 61788: And the basis of the specifications of the detector: The sensors and detectors are mainly composed of superconducting materials and rely on superconductivity or related phenomena: Under test Standards (physical quantities) include magnetic fields, electromagnetic waves, photons of different energy, electrons, particles, alpha particles and others:2 Normative referencesThe following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: IEC 60027 (all parts) Electronic tube parameter symbols (Lettersymbolstobeusedinelectricaltechnology) IEC 60050-815 International Electrotechnical Vocabulary Part 815: Superconductivity (InternationalElectrotechnicalVocabula- ry-Part 815:Superconductivity) IEC 60417 Graphical symbols for electrical equipment [Graphicalsymbolsforuseonequipment (see: http://www: graphicalsymbols)] IEC 60617 Graphical symbols for electrical diagrams [Graphicalsymbolsfordiagrams (see: http://std:iec:ch/ iec60617)] ISO 1000 International System of Units and Application (SIunitsandrecommendationsfortheuseoftheirmultiplesandof certainotherunits) Graphical symbols for use in ISO 7000 equipment [Graphicalsymbolsforuseonequipment-Registered symbols (see: http://www:graphical-symbols:info)]3 Terms and definitionsThe following terms and definitions defined by IEC 60050-815 apply to this document: The following is a termbase website maintained by ISO and IEC for standardization work: ● IEC Electrical Engineering Encyclopedia: http://www:electropedia:org/ ● ISO online browsing platform: http://www:iso:org/obp 3:1 Additional positive feedback; APF A method to increase the voltage-flux conversion rate by using resistors and SQUID loop coupling coils: 3:2 Criticalcurrentmodulationparameter βL For DC SQUID, βL=2LIc/Φ0, where L is the washer inductance of SQUID, Ic is the critical current of Josephson junction, Φ0 Is the flux quantum; for AC SQUID, βL=2πLIc/Φ0: Note: This coefficient can also be called "shielding coefficient": ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39722-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39722-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 39722-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39722-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
