GB/T 20865-2017 English PDFUS$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20865-2017: No or little-tillage fertilizes-seeder Status: Valid GB/T 20865: Historical versions
Basic dataStandard ID: GB/T 20865-2017 (GB/T20865-2017)Description (Translated English): No or little-tillage fertilizes-seeder Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B91 Classification of International Standard: 65.060.30 Word Count Estimation: 18,134 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Older Standard (superseded by this standard): GB/T 20865-2007 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 20865-2017: No or little-tillage fertilizes-seeder---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.No or little-tillage fertilizes-seeder ICS 65.060.30 B91 National Standards of People's Republic of China Replacing GB/T 20865-2007 Free (less) plow fertilizer seeder 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 20865-2007 "no-till fertilizer seeder." Compared with GB/T 20865-2007, the main technical content change As follows. --- Increased less tillage sowing, sowing fertilization joint operating terms (see 3.3 and 3.9); --- Increasing the requirements of rotating and folding parts (see 4.1.5 and 4.8.2.6); --- Increased model coding requirements (see 4.1.6); --- Adjust the distance between the seed fertilizer (see 4.2.2.2 and 4.2.2.2,.2007 edition 4.2.1.4, 4.2.2.4); --- Increased ground mobilization rate, deep plowing and sowing pass rate requirements (see Table 1, Table 2); --- Increased single grain seeder part of the technical indicators (see Table 2); --- Refined loading platform safety technical requirements (see 4.8.1.7); --- Increasing the special requirements of driven farming parts (see 4.8.2); --- Increasing non-operating conditions should be able to reliably cut off the power requirements (see 4.8.2.4); --- Increased rotating and folding parts of the air run test requirements (see 5.2); --- Increasing the single grain-less (less) plowing and fertilizer seeper performance index formula (see 5.3.3.4); --- Increased the classification of inspection items (see Table 6 and Table 7); --- Increased inspection, acceptance test results (see Table 8 and Table 9); --- Removed the corn grain passing rate, the percentage of empty section of the technical indicators and test methods (see.2007 edition of Table 2 and 5.3.3); --- Remove the number of paragraphs and empty terms (see.2007 version 3.9 and 3.10). This standard is proposed by the China Machinery Industry Federation. This standard by the National Agricultural Machinery Standardization Technical Committee (SAC/TC201) centralized. The main drafting units of this standard.China Agricultural Mechanization Research Institute, Henan Haofeng Agricultural Equipment Co., Ltd., Shijiazhuang Agricultural Machinery Co., Ltd., Shanxi Province Agricultural Machinery Quality Supervision and Management Station, Hunan Jinfeng Machinery Technology Co., Ltd. The main drafters of this standard. Yangzhao Wen, Liu Li Jing, Yue Zhigang, Han Yingzhi, Li Xiaofei, Zhu Hongchun. This standard replaces the standards previously issued as. --- GB/T 20865-2007. Free (less) plow fertilizer seeder1 ScopeThis standard specifies the no-tillage or less tillage fertilizer seeder technical requirements, performance indicators, safety technical requirements, the main technical requirements for parts and components And test methods and inspection rules, signs, packaging and storage. This standard applies to mechanical, pneumatic tillage or less tillage fertilizer seeder.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 699-2015 high-quality carbon structural steel GB/T 1243 short pitch drive precision roller chain and sprocket GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL) Mechanical properties of fasteners - Bolts Mechanical properties of fasteners nuts GB/T 5262 Agricultural machinery - Test methods for the determination of the general provisions GB/T 5669 Rotary knife and knife holder GB/T 6973 single grain (precision) seeder test methods GB/T 9239.1-2006 Mechanical vibration constant (rigid) rotor balance quality requirements - Part 1. Specification and balance of tolerance test GB/T 9439 gray cast iron GB/T 9478 grain seed drill test methods GB/T 9480 agriculture and forestry tractors and machinery, lawn and horticultural machinery manual preparation rules Tractors and machinery for agriculture and forestry - Safety requirements - Part 1. General Agricultural and forestry machinery safety - Part 5. Powered farming machinery Agricultural and forestry machinery safety - Part 9. Seeding machinery GB 10396 Tractors and machinery for agriculture and forestry, lawn and garden machinery safety signs and dangerous graphics General GB/T 13306 signs General specification for tractor and machine painting of agriculture and forestry Technical conditions for grain planter JB/T 8574 agricultural machinery product model rules JB/T 9832.2 Tractors and machinery of agriculture and forestry - Determination of adhesion of paint films - Compression method Single grain (precision) seeder technical conditions Low carbon steel cold rolled strip Quality Assurance for Wheat No - Till Seeder3 Terms and definitionsThe following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20865-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 20865-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20865-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20865-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 20865-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20865-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
