|
Std ID |
Description (Standard Title) |
|
GB/T 10456-1989
|
Hot stamping foil
|
|
GB/T 29460-2012
|
Safety assessment for electrofusion joint of polyethylene pipes containing defects
|
|
GB/T 29461-2012
|
[Including 2022XG1] Ultrasonic testing for electrofusion joint of polyethylene pipe
|
|
GB/T 2946-1992
|
Ammonium chloride
|
|
GB/T 2946-2008
|
Ammonium chloride
|
|
GB/T 29462-2012
|
Isolation valve for power station
|
|
GB/T 29463.1-2012
|
Gaskets used in tube-shell heat exchangers -- Part 1: Metallic jacketed gaskets
|
|
GB/T 29463.2-2012
|
Gaskets used in tube-shell heat exchangers -- Part 2: Spiral wound gasket
|
|
GB/T 29463.3-2012
|
Gaskets used in tube-shell heat exchangers -- Part 3: Nonmetallic gaskets
|
|
GB/T 29464-2012
|
Steam-driven jet heat exchanger
|
|
GB/T 29465-2012
|
Shell flange-rear head end of floating heat exchangers
|
|
GB/T 29466-2012
|
Plate heat exchanger unit
|
|
GB/T 29467-2012
|
Implement specifications for enterprise quality trustworthiness management
|
|
GB/T 29468-2012
|
Cleanroom and associated controlled environments -- Guidelines of partition sandwich panel application technology
|
|
GB/T 29469-2012
|
Cleanrooms and associated controlled environments -- Evaluation of performance and rationality
|
|
GB/T 29470-2012
|
Self-regulating heating elements
|
|
GB/T 29471-2012
|
General technical specification for mobile laboratory of food safety inspection
|
|
GB/T 2947-1982
|
Determination of water in urea and ammonium nitrate by Karl Fischer method
|
|
GB/T 2947-2002
|
Determination of free water in urea and ammonium nitrate -- Karl Fischer method
|
|
GB/T 29472-2012
|
Safety management specification for mobile laboratory
|
|
GB/T 29473-2012
|
Classification, code and marking of mobile laboratory
|
|
GB/T 29474-2012
|
General technical specification for the interior decoration material of mobile laboratory
|
|
GB/T 29475-2012
|
Design principles and basic requirements for mobile laboratory
|
|
GB/T 29476-2012
|
General technical specification for mobile laboratory instruments and equipment
|
|
GB/T 29477-2012
|
General technical specification for mobile laboratory shelter
|
|
GB/T 29478-2012
|
Mobile laboratory hazardous waste management specification
|
|
GB/T 29479-2012
|
General requirements of mobile laboratory
|
|
GB/T 29480-2013
|
Safety guideline for accessible electrical equipment
|
|
GB/T 29481-2013
|
Signs for electrical safety
|
|
GB/T 2948-1982
|
Magnetic characteristics of interchangeable magnetic single disk cartridge (top loaded)
|
|
GB/T 29482.1-2013
|
Numerical control system of industrial machines -- Part 1: General requirements
|
|
GB/T 29483-2013
|
Electrical safety of machinery -- Application of protective equipment to detect the presence of persons
|
|
GB/T 29484-2013
|
Electrical installations in ships -- Part 503: Special features -- AC supply systems with voltages in the range of above 1 kV up to and including 15 kV
|
|
GB/T 29485-2013
|
Ship and marine technology -- Electric rudder angle indicators
|
|
GB/T 29486-2013
|
Adjustable frequency converter for household and similar use -- Terminology
|
|
GB/T 29487-2013
|
Medium/high-power mine gas generating set
|
|
GB/T 29488-2013
|
Medium/high-power biogas generating set
|
|
GB/T 29489-2013
|
Inductive load switching for high-voltage alternating current switchgear and controlgear
|
|
GB/T 29490-2013
|
Enterprise intellectual property management
|
|
GB/T 29491-2013
|
Domestic dolomite wares
|
|
GB/T 2949-1982
|
Magnetic characteristics of interchangeable magnetic six-disk pack
|
|
GB/T 29492-2013
|
Chemicals applied in digital printing materials -- The determination of triazines B -- Reversed phase high performance liquid chromatography
|
|
GB/T 29493.1-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 1: Determination of polybrominated biphenyl and polybrominated diphenyl ethers -- GC/MS method
|
|
GB/T 29493.2-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 2: Determination of perfluorooctane sulfonates and perfluorooctanoic acid -- HPLC-MS/MS method
|
|
GB/T 29493.3-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 3: Determination of organotin -- GC/MS method
|
|
GB/T 29493.4-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 4: Determination of polycyclic aromatic hydrocarbons -- GC/MS method
|
|
GB/T 29493.5-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 5: Determination of formaldehyde in emulsion polymers
|
|
GB/T 29493.6-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 6: Determination of isocyanate groups in polyurethane prepolymers
|
|
GB/T 29493.7-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 7: Determination of monomeric diisocyanate in polyurethane coating agent
|
|
GB/T 29493.8-2013
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 8: Determination of residual monomers in polyacrylate
|
|
GB/T 29493.9-2014
|
Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 9: Determination of acrylamide
|
|
GB/T 29494-2013
|
Small vertical axis wind turbines
|
|
GB/T 29497-2013
|
High-flash aromatic naphtha
|
|
GB/T 29498-2013
|
Wood windows and doors
|
|
GB/T 29499-2013
|
Synthetic resin curtain-wall-imitation coating on architectural
|
|
GB/T 29500-2013
|
Wood-plastic composite boards for concrete-form
|
|
GB/T 29501-2013
|
Thermal insulation painted glass
|
|
GB/T 2950-1982
|
Magnetic characteristics of interchangeable magnetic eleven-disk pack
|
|
GB/T 29502-2013
|
Purple ore
|
|
GB/T 29503-2013
|
Aluminium alloy stretched plates
|
|
GB/T 29504-2013
|
300 mm monocrystalline silicon
|
|
GB/T 29505-2013
|
Test method for measuring surface roughness on planar surfaces of silicon wafer
|
|
GB/T 29506-2013
|
300 mm polished monocrystalline silicon wafers
|
|
GB/T 29507-2013
|
Test method for measuring flatness, thickness and total thickness variation on silicon wafers -- Automated non-contact scanning
|
|
GB/T 29508-2013
|
300mm monocrystalline silicon as cut slices and grinded slices
|
|
GB/T 29509.1-2013
|
Methods for chemical analysis of gold-loaded carbon -- Part 1: Determination of gold content
|
|
GB/T 29509.2-2013
|
Methods for chemical analysis of gold-loaded carbon -- Part 2: Determination of silver content -- Flame atomic absorption spectrometry
|
|
GB/T 2951.10-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for determining loss of mass for P. V. C. insulations
|
|
GB/T 2951.10-1997
|
Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filling compounds. Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive co
|
|
GB/T 2951.11-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for determining loss of mass for P. V. C. sheaths
|
|
GB/T 2951.11-2008
|
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 11: Methods for general application -- Measurement of thickness and overall dimensions -- Tests for determining the mechanical properties
|
|
GB/T 2951.1-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. General
|
|
GB/T 2951.1-1997
|
Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section one: Measurement of thickness and overall dimensions--Tests for determining the mechanical properties
|
|
GB/T 2951.12-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for bending at low temperature
|
|
GB/T 2951.12-2008
|
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 12: Methods for general application -- Thermal ageing methods
|
|
GB/T 2951.13-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for elongation at low temperature
|
|
GB/T 2951.13-2008
|
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 13: Methods for general application -- Measurement for determining the density -- Water absorption tests -- Shrinkage test
|
|
GB/T 2951.14-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for impact at low temperature
|
|
GB/T 2951.14-2008
|
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 14: Methods for general application -- Test at low temperature
|
|
GB/T 2951.15-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Oil immersion test
|
|
GB/T 2951.16-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Pressure test at high temperature for insulations
|
|
GB/T 2951.17-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Pressure test at high temperature for sheaths
|
|
GB/T 2951.18-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Hot set test
|
|
GB/T 2951.19-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Measurement of density·Suspension method
|
|
GB/T 2951.20-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Measurement of density·Pycnometer method
|
|
GB/T 2951.21-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Flexing test for flexible cables and wires
|
|
GB/T 2951.21-2008
|
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 21: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests
|
|
GB/T 2951.2-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Determination of insulation thicknesses
|
|
GB/T 2951.2-1997
|
Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
|
|
GB/T 2951.23-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Bending test
|
|
GB/T 2951.24-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for copper naphthenate content of protective coverings
|
|
GB/T 2951.25-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for anaerobe-corrosion of protective coverings
|
|
GB/T 2951.26-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Saline bath test
|
|
GB/T 2951.27-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Corrosion spread test
|
|
GB/T 2951.28-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for abrasion of extruded oversheaths
|
|
GB/T 2951.29-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for water absorption·Weighing test method
|
|
GB/T 2951.30-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for water absorption·Voltage test method
|
|
GB/T 2951.31-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Test for resistance of P. V. C. insulations to cracking
|
|
GB/T 2951.31-2008
|
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 31: Methods specific to PVC compounds -- Pressure test at high temperature -- Test for resistance to cracking
|
|
GB/T 2951.3-1994
|
Test method for determining mechanical and physical properties of electric cables and wires. Determination of sheathing thicknesses
|