|
Std ID |
Description (Standard Title) |
|
GB/T 19769.1-2005
|
Function block for industrial-process measurement and control system -- Part 1: Architecture
|
|
GB/T 19769.1-2015
|
Function blocks -- Part 1: Architecture
|
|
GB/T 19769.2-2005
|
Function blocks for industrial-process measurement and control system -- Part 2: Software tools requirements
|
|
GB/T 19769.2-2015
|
Function blocks -- Part 2: Software tools requirements
|
|
GB/T 19769.3-2012
|
Function block for industrial-process measurement and control systems -- Part 3: Tutorial information
|
|
GB/T 19769.4-2007
|
Function blocks for industrial-process measurement and control system -- Part 4: Rules for compliance profiles
|
|
GB/T 19769.4-2015
|
Function block -- Part 4: Rules for compliance profiles
|
|
GB/T 19770-2005
|
Cinematography -- Viewing conditions for the evaluation of films and slides for television -- Colours, luminance and dimensions
|
|
GB/T 19771-2005
|
Information technology -- Security technology -- Public key infrastructure -- Minimum interoperability specification for PKI components
|
|
GB/T 19772-2005
|
The reuse of urban recycling water quality standard for groundwater recharge
|
|
GB/T 19773-2005
|
Specification of hydrogen purification system on pressure swing adsorption
|
|
GB/T 19774-2005
|
Specification of water electrolyte system for producing hydrogen
|
|
GB/T 19775-2005
|
Glass-metal sealed heat-pipe evacuated solar collector tubes
|
|
GB/T 19776-2008
|
Product of geographical indication -- Zhaotong tianma
|
|
GB/T 19777-2013
|
Product of geographical indication -- Shanxi extra aged vinegar
|
|
GB/T 19779-2005
|
Petroleum and liquid petroleum products -- Calculation of oil quantities -- Static measurement
|
|
GB/T 19780-2005
|
Capacity calibration of spherical metal tank -- Total station external measuring method
|
|
GB/T 1978-1988
|
Zinc plate for dry cell
|
|
GB/T 19782-2005
|
Chinese prawn
|
|
GB/T 19783-2005
|
Chinese mitten-handed crab
|
|
GB/T 19784-2005
|
Shrink packaging
|
|
GB/T 19785-2005
|
Stretch packaging
|
|
GB/T 19786-2005
|
Rules on wood packaging container detection
|
|
GB/T 19786-2015
|
Inspection procedure for wooden containers
|
|
GB/T 19787-2005
|
Heat-shrinkable Polyolefin Films for Packaging Materials
|
|
GB/T 19788-2005
|
The honeycomb cardboard box testing protocols
|
|
GB/T 19788-2015
|
Inspection procedure for honeycomb fibreboard boxes
|
|
GB/T 19789-2005
|
Packaging materials -- Test method for oxygen gas permeability characteristics of plastic film and sheeting -- Coulometric sensor
|
|
GB/T 19791-2005
|
The criterion insect proof net design and its installation for greenhouse
|
|
GB/T 1979-1980
|
Diagram of a low magnification texture blemish grading of structural steel
|
|
GB/T 11061-1989
|
Natural gas--Determination of sulfur--Oxidative microcoulometry method
|
|
GB/T 19792-2005
|
Agricultural irrigation equipment -- Water-driven chemical injector pumps
|
|
GB/T 19792-2012
|
Agricultural irrigation equipment -- Water-driven chemical injector pumps
|
|
GB/T 19793-2005
|
Agricultural irrigation equipment -- Hydraulically operated irrigation valves
|
|
GB/T 19794-2005
|
Agricultural irrigation equipment -- Volumetric valves -- General requirements and test methods
|
|
GB/T 19794-2012
|
Agricultural irrigation equipment -- Volumetric valves -- General requirements and test methods
|
|
GB/T 19795.1-2005
|
Agricultural irrigation equipment -- Rotating sprinklers -- Part 1: Design and operational requirements
|
|
GB/T 19795.2-2005
|
Agricultural irrigation equipment -- Rotating sprinklers -- Part 2: Uniformity of distribution and test methods
|
|
GB/T 19796-2005
|
Agricultural irrigation equipment -- Plastics saddles for polyethylene pressure pipes
|
|
GB/T 19797-2005
|
Agricultural irrigation equipment -- Centre-pivot and moving lateral irrigation machines -- Determination of uniformity of water distribution
|
|
GB/T 19797-2012
|
Agricultural irrigation equipment -- Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles -- Determination of uniformity of water distribution
|
|
GB/T 19799.1-2005
|
Non-destructive testing -- Ultrasonic testing -- Calibration block No.1
|
|
GB/T 10247-1988
|
Methods for measurement and test of the viscosity
|
|
GB/T 19799.2-2005
|
Non-destructive testing - Ultrasonic testing - Calibration block No. 2
|
|
GB/T 19799.2-2012
|
Non-destructive testing -- Ultrasonic testing -- Specification for calibration block No.2
|
|
GB/T 19800-2005
|
Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
|
|
GB/T 19801-2005
|
Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
|
|
GB/T 1980-1996
|
Standard frequencies
|
|
GB/T 1980-2005
|
Standard frequencies
|
|
GB/T 19802-2005
|
Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements
|
|
GB/T 19803-2005
|
Non-destructive testing -- Radiographic image quality indicators -- Principles and identification
|
|
GB/T 19804-2005
|
Welding -- General tolerances for welded constructions -- Dimensions for lengths and angles -- Shape and position
|
|
GB/T 19805-2005
|
Qualification test of welding operators
|
|
GB/T 19806-2005
|
Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies
|
|
GB/T 19807-2005
|
Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
|
|
GB/T 19808-2005
|
Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90mm
|
|
GB/T 19809-2005
|
Plastics pipes and fitting -- Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
|
|
GB/T 1981.1-2004
|
Electrical insulating paint to 1 part: definitions and general requirements
|
|
GB/T 1981.1-2007
|
Varnishes used for electrical insulation -- Part 1: Definitions and general requirements
|
|
GB/T 1981.2-2003
|
Electrical insulating paint -- Part 2: Test methods
|
|
GB/T 1981.2-2009
|
Varnishes used for electrical insulation -- Part 2: Methods of test
|
|
GB/T 1981.3-2009
|
Varnishes used for electrical insulation -- Part 3: Specifications for hot curing impregnating varnishes
|
|
GB/T 1981.4-2009
|
Varnishes used for electrical insulation -- Part 4: Polyester-imide varnishes
|
|
GB/T 1981.5-2009
|
Varnishes used for electrical insulation -- Part 5: Energy-saving fast curing melamine alkyd impregnating varnishes
|
|
GB/T 1981.6-2014
|
Varnishes used for electrical insulation -- Part 6: Environment-friendly water or emulsion based impregnating varnishes
|
|
GB/T 19810-2005
|
Polyethylene (PE) pipe and fittings -- Determination of the tensile strength and failure mode of test pieced from a butt-fused joint
|
|
GB/T 19811-2005
|
Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
|
|
GB/T 1981-1989
|
Test methods for insulating varnishes containing solvent
|
|
GB/T 19812.1-2005
|
Plastic equipment for water saving irrigation -- Part 1: Drip tape with labyrinth on one side
|
|
GB/T 19812.2-2005
|
Plastic equipment for water saving irrigation -- Part 2: Pressure compensating emitter and emitting pipe
|
|
GB/T 19812.3-2008
|
Plastic equipment for water saving irrigation -- Drip pipe and tape inlaid with emitters inside
|
|
GB/T 19813-2005
|
Solar energy raised pavement markers
|
|
GB/T 19816.1-2005
|
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling
|
|
GB/T 19816.2-2005
|
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution
|
|
GB/T 19816.3-2005
|
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness
|
|
GB/T 19816.4-2005
|
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density
|
|
GB/T 19816.5-2005
|
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure
|
|
GB/T 19816.6-2005
|
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter
|
|
GB/T 19816.7-2005
|
Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture
|
|
GB/T 19817-2005
|
Textiles -- Fabrics for furnishings
|
|
GB/T 19818-2005
|
Seed cotton cleaner
|
|
GB/T 19819-2005
|
Saw gin
|
|
GB/T 19820-2005
|
Hydraulic cotton bale press
|
|
GB/T 1982-1980
|
Fundamental parameters and general requirements of audio frequency power amplifier (megaphone)
|
|
GB/T 19822-2005
|
Specification for hand anodic oxidation coatings on aluminium and its alloys
|
|
GB/T 19823-2005
|
Thermal spraying procedures for the application of thermally sprayed coating for engineering components
|
|
GB/T 19824-2005
|
Thermal spraying -- Approval testing of thermal sprayers
|
|
GB/T 19826-2005
|
General technical conditions and safety requirements of the DC power supply of power engineering
|
|
GB/T 11061-1997
|
Natural gas--Determination of sulfur--Oxidative microcoulometry method
|
|
GB/T 19827-2005
|
Technical product documentation -- Protection notices for restricting the use of documents and products
|
|
GB/T 19828-2005
|
Technology specification of management quality for edible salt authorized enterprises
|
|
GB/T 19829.1-2005
|
Petroleum and natural gas industries -- Life cycle costing -- Part 1: Methodology
|
|
GB/T 19829.2-2005
|
Petroleum and natural gas industries -- Life cycle costing -- Part 2: Guidance on application of methodology and calculation methods
|
|
GB/T 19829.3-2006
|
Petroleum and natural gas industries -- Life cycle costing -- Part 3: Implementation guidelines
|
|
GB/T 19830-2005
|
Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells
|
|
GB/T 19830-2011
|
Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells
|
|
GB/T 19831.1-2005
|
Petroleum and natural gas industries -- Casing centralizers -- Part 1: Bow-spring casing centralizers
|
|
GB/T 19831.2-2008
|
Petroleum and natural gas industries -- Equipment for well cementing -- Part 2: Centralizer placement and stop-collar testing
|
|
GB/T 19832-2005
|
Petroleum and natural gas industries -- Drilling and production equipment -- Inspection, maintenance, repair and remanufacture of hoisting equipment
|
|
GB/T 19833-2005
|
Coal preparation plant -- Assessment of the liability to breakdown in water of materials associated with coal seams
|