GB/T 19812.3-2017 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19812.3-2017: Plastic equipment for water saving irrigation -- Part 3: Drip pipe and drip tape inlaid with emitters inside
Status: Valid

GB/T 19812.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 19812.3-2017	359	Add to Cart	4 days	Plastic equipment for water saving irrigation -- Part 3: Drip pipe and drip tape inlaid with emitters inside	Valid
GB/T 19812.3-2008	479	Add to Cart	3 days	Plastic equipment for water saving irrigation -- Drip pipe and tape inlaid with emitters inside	Obsolete

Similar standards

GB/T 19472.1   GB/T 19472.2   GB/T 21302   GB/T 19812.7   GB/T 19812.6   GB/T 19812.5   

Basic data

Standard ID: GB/T 19812.3-2017 (GB/T19812.3-2017)
Description (Translated English): Plastic equipment for water saving irrigation -- Part 3: Drip pipe and drip tape inlaid with emitters inside
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Classification of International Standard: 23.040.20
Word Count Estimation: 18,197
Date of Issue: 2017-11-01
Date of Implementation: 2018-05-01
Older Standard (superseded by this standard): GB/T 19812.3-2008
Regulation (derived from): National Standard Announcement 2017 No. 29
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 19812.3-2017: Plastic equipment for water saving irrigation -- Part 3: Drip pipe and drip tape inlaid with emitters inside

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastic equipment for water saving irrigation-Part 3. Drip pipe and drip tape inlaid with emitters inside ICS 23.040.20 G33 National Standards of People's Republic of China Replacing GB/T 19812.3-2008 Plastic water-saving irrigation equipment Part 3. Inlaid drip irrigation tubes and drip tapes Part 3.Drippipeanddriptapeinlaidwithemittersinside Posted.2017-11-01 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

GB/T 19812 "plastic water-saving irrigation equipment" is divided into five parts. --- Part 1. Single-wing labyrinth drip tape; --- Part 2. Pressure compensated dripper and drip irrigation pipe; --- Part 3. Inlaid drip irrigation and drip tape; --- Part 4. Polyethylene (PE) branch pipe; --- Part 5. Buried drip pipe. This section GB/T 19812 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 19812.3-2008 "plastic water-saving irrigation equipment inlaid drip irrigation pipe, with" and GB/T 19812.3- 2008 compared to the main technical changes other than editorial changes are as follows. --- The standard name was changed to "plastic water-saving irrigation equipment Part 3. Inlaid drip irrigation and drip tape"; --- Removed the "paragraph" in the last paragraph "This section does not apply to the use of buried irrigation pipe, with" (see Chapter 1,.2008 edition 1 chapter); --- Normative references added GB/T 2918-1998, GB/T 8804.3-2003, GB/T 16422.2-2014, GB/T 19278-2003, GB/T 19466.6-2009, SL571-2013 (see Chapter 2); --- Removed the term "flow index", adding "rated working pressure" "nominal wall thickness" "nominal diameter" of the definition (see Chapter 3, 2008 edition Chapter 3); --- "Marking" chapter added "wall thickness" of the marking requirements "Specifications. Pipe diameter (mm) × nominal wall thickness (mm) × Drip hole spacing (mm) "(see Chapter 4,.2008 Edition, Chapter 5); --- "Material" chapter, an increase of "manufacture of drip irrigation pipe, drip irrigation tape used should be polyethylene" "should not use medical waste and have Recycled materials from toxic and hazardous chemical packaging "" Made according to this section Polyethylene drip irrigation tubes or polyethylene drip tapes Used raw materials can be added to recover from the field according to this part of the production of polyethylene drip tape made of recycled material, the performance should be Fu For the requirements of this part, see Appendix A "and other requirements (see Chapter 5,.2008 edition Chapter 6); --- Deleted two kinds of pressure rating of "250kPa" and "320kPa" (see 6.3.1,.2008 edition 7.2.1) in the specification of drip irrigation pipe; --- Remove the "drip irrigation with nominal wall thickness and its limit deviation" requirements "0.50mm" "0.60mm" two specifications (see 6.3.2.2, 2008 edition 7.2.2.2); --- Modify "C" value and "Cv" value in "Flow Uniformity" requirement, "C" is changed to "Average flow q relative to rated flow qn (C) should be within ± 7%. "" Cv "should be amended to read" not to exceed 7% "(see 6.4,.2008 version 7.3); --- Modify "the relationship between flow and inlet pressure" in the "Rq", revised to "the average flow curve of the flow rate relative to The deviation (Rq value) of the flow rate obtained from the plant curve should be within ± 7%. "(See 6.5,.2008 edition 7.4); --- Increase the "anti-sediment blocking performance requirements" (see 6.6); --- Modify the "pressure resistance" at 23 ℃ and change to "non-reusing drip tape should be able to withstand 1.5 times the rated working pressure;" "Reusable Drip pipe, drip tape should be able to withstand 2 times the rated working pressure "" Flow rate deviation should be within ± 7%. " (See 6.7.1,.2008 edition 7.5.1); --- Modify the "water pressure at 45 ℃", the test temperature is modified to "(45 ± 2) ℃"; the maintenance time is changed to "and maintain 1h"; flow The amount of deviation is revised to read "Flow rate deviation should be within ± 7%" (see 7.6.2,.2008 version 7.5.2); --- Increased non-multiplex drip tape "burst pressure" requirements and test methods (see 6.8,8.8); --- Modify the "pull-pull performance" in the load, revised to "should be able to withstand the required load" (see 6.9,.2008 version 7.6); --- Increasing the reuse of drip irrigation, drip irrigation with "artificial aging performance" requirements (see 6.10); --- Modify the "carbon black content" index value, revised to "(2.25 ± 0.50)%" (see 6.1 .8.2008 edition 7.9); --- Increase the sample conditioning requirements, "Unless otherwise specified, the sample at an ambient temperature of (23 ± 2) ℃ under the conditions adjusted to Less 24h. "(See 7.2); --- Modify the "flow and the relationship between the inlet pressure" test method (see 8.5,.2008 8.5); --- Increase "anti-sediment clogging performance" test method (see 8.6); --- pull-resistant performance test method to increase Table 7, the test load is loaded by the nominal wall thickness of the product were classified (See 8.9); --- Increasing the "artificial aging performance" test method (see 8.10); --- Modify the "batch" program, revised to "each batch of 5,000 volumes"; seven days production was revised to "less than 5,000 volumes" (see 9.1, 2008 Edition 9.1); --- Added "batch number N and sample size n" in Sampling Plan (see 9.2.2); --- Modify the "type test" period, revised to "two years" (see 9.3,.2008 version 9.3); --- Increasing the "type test" decision rules (see 9.4.2); --- Added an informative appendix "Polyethylene recycling materials performance" (see Appendix A). Please note that some of the contents of this document may involve patents. The issuing agencies of this document do not bear the responsibility of identifying these patents. This part is proposed by China National Light Industry Council. This part of the National Plastics Standardization Technical Committee (SAC/TC48) centralized. This part of the drafting unit. Xinjiang Tianye Co., Ltd., China Institute of Water Resources and Hydropower Research, Dayu Water Group Co., Ltd., Inner Mongolia Mu Wo gold land water-saving Engineering Equipment Co., Ltd., Gansu Ruisheng · Asia and the United States high-tech agricultural Co., Ltd., Jilin Xi Feng Water Saving Technology Co., Ltd., Hebei Runnong Water Conservation Technology Co., Ltd., Tangshan City, get rich plastic Machinery Co., Ltd., Fujian Yatong New Materials Technology Co., Ltd., Beijing Lvyuan Plastic Co., Ltd., China Plastic Processing Industry Association plastic water-saving equipment Professional Committee, Beijing workers Business University. The main drafters of this section. Chen Lin, Gao Benhu, Tian Xiaohong, Zhang Yanqin, Deng Shengrong, Jiang Wansong, Ansheng Xin, Wang Zhifu, Xu Shenguang, Saling look, Chang, Xiang Aimin. This part replaces the standards previously issued as. --- GB/T 19812.3-2008. Plastic water-saving irrigation equipment Part 3. Inlaid drip irrigation tubes and drip tapes

1 Scope

This section GB/T 19812 specifies the terms and definitions, markings, materials, requirements, samples and tests of inlaid drip irrigation and drip irrigation tape Conditions, test methods, inspection rules and packaging signs, packaging, transportation, storage. This section applies to the main material using polyolefin as the main raw material inlay non-pressure compensation drip irrigation pipe and drip tape (hereinafter referred to as "drops Irrigation "or" drip tape "), the transmission medium temperature does not exceed 45 ℃.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2828.1-2012 Sampling procedures for inspection - Part 1 - Batch-by-lot inspection by acceptance quality limit (AQL) plan GB/T 2918-1998 plastic sample conditioning and testing of the standard environment GB/T 8804.3-2003 Determination of tensile properties of thermoplastic pipe - Part 3 Polyolefin pipes Plastics piping systems - Determination of dimensions of plastic parts GB/T 13021-1991 Polyethylene pipe and fittings - Determination of carbon black content (TG method) GB/T 15819-2006 Irrigation polyethylene (PE) pipe by the plug-in pipe caused by environmental stress cracking resistance test side Law and technical requirements GB/T 16422.2-2014 Plastics - Laboratory exposure test methods - Part 2. Xenon arc lamps Technical specifications and test methods for drippers and drip irrigation pipes for agricultural irrigation equipment GB/T 17187-2009 GB/T 18251-2000 Polyolefin pipes, fittings and mixed materials Determination of pigment or carbon black dispersion Thermoplastics pipes, fittings and valves - Generic terminology and their definitions GB/T 19278-2003 GB/T 19466.6-2009 plastic differential scanning calorimetry (DSC) Part 6. Oxidation induction time (isothermal OIT) and oxygen Induction of temperature (dynamic OIT) determination Standard Test Method for Hydraulic Basic Parameters of Water Saving Irrigation Equipment

3 Terms and definitions

GB/T 17187-2009, GB/T 19278-2003 defined and the following terms and definitions apply to this document. 3.1 Drip irrigation pipe drippipeinlaidwithemittersinside Drip at a certain distance or continuous set in the tube, and in the drip processing holes, drip form of water tube. 3.2 Inlaid drip tape with driptapeinlaidwithemittersinside Drip at a certain distance or continuous set in the band, and in the drip processing holes, dripping water in the form of belt. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19812.3-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19812.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19812.3-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19812.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 19812.3-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19812.3-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.